挥发性有机物污染场地挖掘过程中污染扩散特征

我国城市工业污染场地主要受挥发性及半挥发性有机污染物(VOCs/SVOCs)的污染.挥发性有机污染物挥发性大,在环境中容易迁移,土壤被挖掘和扰动时,土壤中VOCs很容易形成短时间内的相对较高浓度释放;如果施工人员没有进行适当防护,极易产生健康危害.本研究通过现场快速监测与采样管采样技术相结合,研究污染场地修复开挖过程中气态污染物的分布规律.监测结果表明,在场地开挖的主导风向上,气态污染物浓度分布随距离而下降,并呈现波峰和波谷交替出现的特征.监测结果可以用多个高斯烟团的叠加来拟合.本研究结合工业场所职业健康与安全有关限值,推导污染土壤修复开挖现场安全区域划分的方法,并提出相应分区的个人安全防护响应措施.     

滇池几种鱼体汞含量与δ13C、δ15N特征

鱼体是人体摄入甲基汞的重要暴露途径。对滇池几种重要鱼类的总汞、甲基汞和13 C、15 N进行了测定,结果发现:滇池中鱼体总汞和甲基汞含量范围(平均值)分别为5.6~287ng/g(74±59ng/g)和2.7~400ng/g(73±67ng/g)。总汞和甲基汞含量存现显著的相关关系,(R2=0.65,p0.001),且甲基汞占总汞的平均比例大于80%,表明鱼体中的汞主要以甲基汞的形态存在。滇池几种鱼类的δ13 C平均值为-20.5±4.2‰,范围为-29.0‰~-15.1‰,δ15 N平均值为17.1±4.3‰,范围为5.9‰~25.8‰。同位素比值与鱼体汞含量之间没有显著的相关性,可能是由于滇池中采集的黄颡鱼和白鱼与其他鱼类不属于同一种食物源,因此对13 C和15 N的分馏不同。另外,采集的鱼类大小和年龄不均一,也可能是造成13 C和15 N异常分馏的原因之一。     

2011年中国大陆地震灾害损失述评

列出了2011年中国境内5.0级以上地震目录,总结了当年我国大陆地区各次地震灾害事件的基础数据信息和灾害信息,结合该年度我国大陆地区地震灾害事件发生所在省(自治区、直辖市)地震局的地震灾害评估资料,总结、归纳了2011年我国大陆地区地震灾害的主要数据和特性。最后,列出了1990年以来我国大陆地震灾害的相关数据,并进行了简单的比较。     

膨润土的羟基铝改性及对染料工业废水的处理研究

通过对膨润土的羟基铝改性实验大大提高了膨润土对染料废水的处理效率。实验结果表明:改性膨润土对变色酸有很好的去除效果,对H酸有较好的去除效果,对T酸处理效果一般,对吐氏酸几乎没有效果。     

Land use structure optimization based on carbon storage in several regional terrestrial ecosystems across China

Land use change is a main driver of carbon storage in terrestrial ecosystems. Based on land use data, research results related to carbon densities in vegetation and soil as well as government policies related to development in different regions of China, this paper optimized land use structure in 2020 for different regions with the goal of increasing terrestrial ecosystem carbon storage. We defined seven types of land use: (1) cultivated land, (2) garden land, (3) woodland, (4) pasture land, (5) other agricultural land, (6) urbanized land, and (7) a mixture of other land which we call mixed land which included open water, swamps, glaciers and other land as defined below. We found: (1) For most eastern regions, woodland has the highest carbon (C) densities while C densities of pasture land and cultivated land did not differ widely. Both have C densities higher than urbanized land while urbanized land has higher carbon densities than the areas placed in the mixed land type. (2) Under an optimized land use structure projected for 2020, the area of cultivated land will decrease compared with 2005 for most regions. The areas of garden land, pasture land and other agricultural land are much smaller compared with the mixed land use type, and the changes there are not obvious and their contributions to increased carbon storage are not significant. The area of woodland will increase the most obviously and it will contribute the most to increased carbon storage. The increasing urbanization of land and the decreasing trend of other land types make it difficult to change carbon storage patterns since the Chinese economy is expanding rapidly. (3) The optimized land use structure presented here will have effects on the entire country though with regional differences. Some inland regions will always have a larger potential to increase carbon storage than other areas because the potentialities in some coastal regions are limited by social and economic development.     

Copper and zinc recycling in Australia: potential quantities and policy options

This paper presents relevant data for industry and governmental policy makers with the aim of increasing the recycling rate of end-of-life copper and zinc in Australia in a technically and economically feasible way. The methodology used to quantify and spatially distribute end-of-life flows of copper and zinc is based on existing and anticipated in-use stocks, their residence times, and their historical and anticipated future evolution. Australia currently (ca. 2000) generates about 72 Gg/year and 57 Gg/year of end-of-life copper and zinc, respectively. Some 70% of all discarded copper and 40% of all discarded zinc generated in Australia are currently being recycled. A detailed assessment shows that about 75% of all end-of-life material in Australia comes from the three states New South Wales, Victoria, and Queensland. In Australia, about 70–75% of waste copper and waste zinc is generated in urban areas. Residential applications account for about 40% (copper) and 60% (zinc) of the generated discards; commercial and industrial applications account for the remainder. By 2030, the discard flows are predicted to increase by about 105% and 155%, to 150 Gg Cu/year and 145 Gg Zn/year, providing substantially increased opportunities for recovery and re-use. Priority targets for the improvement of copper and zinc recycling in Australia are buildings under renovation, urban infrastructure, the transportation sector, and also consumer and business durables. Urban centres are particularly attractive locations for recycling facilities, especially in Perth and Adelaide.     

民用煤排放PM2.5中碳组分与水溶性离子特征

研究4种典型民用煤燃烧排放PM_2.5中的碳组分以及水溶性离子含量特点,并通过PAM-OFR(潜在气溶胶质量-氧化流动反应器)模拟了大气老化过程(2d)对煤球与烟煤燃烧PM_2.5中碳组分与水溶性离子含量的变化影响。结果表明,烟煤燃放PM_2.5中碳组分含量最高,达到57.96%,其EC含量是其他煤种的4.3~9.6倍。民用煤燃烧产生PM_2.5中水溶性离子以Na⁺与SO₄^2-为主,其在总水溶性离子中占比合计约47%~76%。经历了大气老化试验后,煤球与烟煤燃烧排放PM_2.5中NH₄⁺和NO₃^-离子含量大幅增加,与之相比,TC占PM_2.5比例分别下降了12.03%与19.99%。     

焦化类污染场地堆式燃气热脱附工程示范与效果评估

近年来,有机污染土壤堆式燃气热脱附技术因具有二次污染可控、污染物去除率高以及修复成本低等优势得到快速发展,然而目前国内外关于该技术的工程示范与效果评估仍有待研究. 针对我国北方某退役焦化厂污染土壤,开展了2 000 m3的堆式燃气热脱附工程试验,系统分析热脱附过程中土壤的温湿度变化规律、修复效果以及能源消耗等情况,并提出堆式燃气热脱附技术的应用条件和优化方法. 结果表明:当加热运行至35 d时,堆体测温点平均温度达175 ℃,抽检的12组土壤样品中污染物浓度均远低于GB 36600—2018《土壤环境质量 建设用地土壤污染风险管控标准(试行)》中第一类用地筛选值,修复达标率为100%;运行至39 d时,收集水量共计310.4 m3,土壤体积含水率从25.8%降至10.3%左右;同时,该试验采用的烟气余热再利用技术将排烟温度降至300 ℃以下,使修复能耗降低约11.5%,即每修复1 m3污染土壤消耗约49.5 Nm3天然气和16 kW?h电量;此外,采用COMSOL软件模拟堆体的温度和湿度结果与试验结果的平均相对误差分别小于7.36%和7.49%,具有较好的吻合性. 研究显示,热脱附修复过程中堆体的底层平均温度处于较低水平,需提高底层加热管温度,或铺设岩棉板进行隔热保温措施,以提高堆体底层土壤的修复效率,研究结果可为有机污染土壤堆式燃气热脱附技术应用提供技术支撑.      

厌氧微网反应器处理生活污水膜污染物研究

采用涤纶网加工的微网膜组件与厌氧反应器结合构成厌氧微网生物反应器用于处理城市生活污水。在不同反应器形式和水力停留时间条件下反应器稳定运行了144 d。研究结果表明完全搅拌反应器在膜通量12 L/(m2.h)条件下跨膜压差变化较小,整体出水水质高于无搅拌式反应器。通过膜面SS含量测定、粒径和三维荧光光谱分析等方法对膜面污染物进行了系统分析。无搅拌式AnFBR随着停留时间的延长,膜面污染物的SS减少,粒径减小;完全搅拌式AnFBR膜面污染物的SS最少,粒径最小。三位荧光分析表明SMP主要有2个类蛋白质荧光峰A和B,中心位置(Ex/Em)分别位于230~235/335~350 nm及280~290/330~355 nm,EPS样品中除了峰A和峰B外还有2个峰,峰C位置(Ex/Em)在340~350/435~445 nm,与类富里酸物质有关,峰D位于420~440/465~515 nm,与类腐殖酸物质有关。     

腐蚀电池-Fenton工艺用于垃圾渗滤液的预处理研究

采用铁屑和颗粒活性炭通过原电池反应产生的Fe2 离子取代FeSO4组成腐蚀电池-Fenton工艺,采用该工艺对垃圾渗滤液进行预处理.结果表明,最佳运行条件为pH值为2、H2O2投加量为理论投加量的50%、铁屑投量为30 g(500 mL渗滤液中)、Fe/C质量比为2.5、反应时间为1 h、絮凝pH值为7,其COD去除率可达到60%(其中活性炭吸附占19%),TOC去除率可达47%(其中活性碳吸附占13%),BOD5/COD值从原水的0 35提高到出水的0.69;而传统Fenton工艺在H2O2/Fe2 比值等于5、其它条件与腐蚀电池-Fenton工艺相同的条件下,COD去除率为26%,TOC去除率为19%,BOD5/COD比值从原水的0.43提高到0.69.将腐蚀电池-Fenton工艺用于垃圾渗滤液的预处理,在有机物去除率和提高可生化性方面效果均明显优于传统Fenton工艺.