Effect of pyrolysis and oxidation characteristics on lauric acid and stearic acid dust explosion hazards

The effect of pyrolysis and oxidation characteristics on the explosion sensitivity and severity parameters, including the minimum ignition energy MIE, minimum ignition temperature MIT, minimum explosion concentration MEC, maximum explosion pressure P_max, maximum rate of pressure rise (dP/dt)_max and deflagration index K_st, of lauric acid and stearic acid dust clouds was experimentally investigated. A synchronous thermal analyser was used to test the particle thermal characteristics. The functional test apparatuses including the 1.2 L Hartmann-tube apparatus, modified Godbert-Greenwald furnace, and 20 L explosion apparatus were used to test the explosion parameters. The results indicated that the rapid and slow weight loss processes of lauric acid dust followed a one-dimensional diffusion model (D1 model) and a 1.5 order chemical reaction model (F1.5 model), respectively. In addition, the rapid and slow weight loss processes of stearic acid followed a 1.5 order chemical reaction model (F1.5 model) and a three-dimensional diffusion model (D3 model), respectively, and the corresponding average apparent activation energy E and pre-exponential factor A were larger than those of lauric acid. The stearic acid dust explosion had higher values of MIE and MIT, which were mainly dependent on the higher pyrolysis and oxidation temperatures and the larger apparent activation energy E determining the slower rate of chemical bond breakage during pyrolysis and oxidation. In contrast, the lauric acid dust explosion had a higher MEC related to a smaller pre-exponential factor A with a lower amount of released reaction heat and a lower heat release rate during pyrolysis and oxidation. Additionally, due to the competition regime of the higher oxidation reaction heat release and greater consumption of oxygen during explosion, the explosion pressure P_m of the stearic acid dust was larger in low concentration ranges and decayed to an even smaller pressure than with lauric acid when the concentration exceeded 500 g/m³. The rate of explosion pressure rise (dP/dt)_m of the stearic acid dust was always larger in the experimental concentration range. The stearic acid dust explosion possessed a higher P_max, (dP/dt)_max and K_st mainly because of a larger pre-exponential factor A related to more active sites participating in the pyrolysis and oxidation reaction. Consequently, the active chemical reaction occurred more violently, and the temperature and overpressure rose faster, indicating a higher explosion hazard class for stearic acid dust.     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.     

Evaluation of thermal reaction for two azo compounds by using 20-L apparatus and calorimetry

Azo compounds are widely involved in the industrial processes of dyes, pigments, initiators, and blowing agents. Unfortunately, these compounds have a bivalent unstable –NN– composition, which can be readily broken when the ambient temperature is elevated. Self-accelerating decomposition might cause a runaway reaction and lead to a fire, explosion, or leakage when the cooling system fails or other events occur. This study investigated the explosion properties, thermal stability parameters, and thermal hazard and mechanism of 2,2′–azobisisobutyronitrile (AIBN) and 2,2′–azobis–2–methylbutyronitrile (AMBN). We used a 20-L apparatus, vent sizing package 2, synchronous thermal analysis, and differential scanning calorimetry under explosive, adiabatic, and dynamic conditions to acquire the explosive curves, thermal curves, and thermodynamic parameters of the substances. Moreover, the differential isoconversional method (Friedman method) and ASTM E698 equation were employed to obtain the apparent activation energy E_a. All the experimental results revealed that AIBN is more dangerous than AMBN. The E_a of AIBN was lower than that of AMBN. The results can be used to construct an azo compound thermal hazard database for use for searches and reference examples by industry and related research areas.     

阿什河水系枯水期氮污染特征与同位素源解析

在阿什河水系设置20个采样点,采用水质监测技术和稳定氮同位素示踪技术,研究了枯水期阿什河氮污染特征和硝酸盐氮污染来源。结果表明:(1)阿什河枯水期大部分采样点氨氮浓度较低,大部分区域达到或优于《地表水环境质量标准》(GB3838—2002)中Ⅲ类。上游河段硝酸盐氮浓度较低,中游河段较高,到下游河段略有降低。总氮浓度较高,最高达19.4mg/L。(2)阿什河水系采样点15 N的丰度(δ15 N)主要处于0.11%~0.21%、0.42%~0.78%、0.83%~0.88%和1.09%~1.26%。稳定15 N同位素示踪解析阿什河硝酸盐氮污染来源表明,阿什河上游污染源主要为大气沉降、土壤有机氮和人工化肥;中游主要受畜禽养殖污水和生活污水污染;下游主要受城镇生活污水和工业废水影响。     

Explosion characteristics of micron- and nano-size magnesium powders

Explosion characteristics of micron- and nano-size magnesium powders were determined using CSIR-CBRI 20-L Sphere, Hartmann apparatus and Godbert-Greenwald furnace to study influence of particle size reduction to nano-range on these. The explosion parameters investigated are: maximum explosion pressure (P_max), maximum rate of pressure-rise (dP/dt)_max, dust explosibility index (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and effect of reduced oxygen level on explosion severity. Magnesium particle sizes are: 125, 74, 38, 22, 10 and 1 μm; and 400, 200, 150, 100, 50 and 30 nm. Experimental results indicate significant increase in explosion severity (P_max: 7–14 bar, K_St: 98–510 bar·m/s) as particle size decreases from 125 to 1 μm, it is maximum for 400 nm (P_max: 14.6 bar, K_St: 528 bar·m/s) and decreases with further decrease of particle size to nano-range 200–30 nm (P_max: 12.4–9.4 bar, K_St: 460–262 bar·m/s) as it is affected by agglomeration of nano-particles. MEC decreases from 160 to 30 g/m³ on decreasing particle size from 125 to 1 μm, its value is 30 g/m³ for 400 and 200 nm and 20 g/m³ for further decrease in nano-range (150–30 nm). MIE reduces from 120 to 2 mJ on decreasing the particle size from 125 to 1 μm, its value is 1 mJ for 400, 200, 150 nm size and <1 mJ for 50 and 30 nm. Minimum ignition temperature is 600 °C for 125 μm magnesium, it varies between 570 and 450 °C for sizes 38–1 μm and 400–350 °C for size range 400–30 nm. Magnesium powders in nano-range (30–200 nm) explode less violently than micron-range powder. However, likelihood of explosion increases significantly for nano-range magnesium. LOC is 5% for magnesium size range 125–38 μm, 4% for 22–1 μm, 3% for 400 nm, 4% for 200, 150 and 100 nm, and 5% for 50 and 30 nm. Reduction in oxygen levels to 9% results in decrease in P_max and K_St by a factor of 2–3 and 4–5, respectively, for micron as well as nano-sizes. The experimental data presented will be useful for industries producing or handling similar size range micron- and nano-magnesium in order to evaluate explosibility of their magnesium powders and propose/design adequate safety measures.     

The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles.The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance.There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman’s correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier.     

Long-term changes in microbial water quality indicators in a hydro-power plant reservoir: The role of natural factors and socio-economic changes

Long-term changes, from 1984 to 2010, in the indicators of microbial pollution (total viable count, coliforms, Escherichia coli, enterococci, and Clostridium perfringens) are analysed in the Riga Hydropower Plant Reservoir, an essential source of drinking water for Riga, the capital of Latvia. Counts in microbial indicators fluctuated seasonally and were related to physicochemical parameters (nitrogen compounds, turbidity, temperature, and pH). The changes in microbial pollution were brought about by two major socio-economic developments. Firstly, Latvia’s independence from the USSR in 1991 which facilitated a distinct reduction in most microorganism counts due to a sharp decline in industrial and agricultural production. This resulted in a significant drop in point and nonpoint pollution in the river basin. A further development was Latvia joining the European Union in 2004. The corresponding focus on water management, including wastewater treatment, was a major priority of environmental investment and lead to improvements in microbial water quality.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01470-1) contains supplementary material, which is available to authorized users.     

典型城市污水中对羟基苯甲酸酯的污染特征

对羟基苯甲酸酯(parabens)作为防腐剂、防霉剂和杀菌剂等被广泛应用于食品、化妆品和药品中.近年来的研究表明,该类化合物能够在地表水体中检出,对水生生态环境存在潜在的危害.本研究于2016年秋季和冬季,对哈尔滨某典型城市污水处理厂进水进行了24 h连续采集,对6种parabens的质量浓度和4种常规水质指标进行了分析.结果表明,parabens普遍存在于城市污水中,对羟基苯甲酸甲酯、对羟基苯甲酸乙酯和对羟基苯甲酸丙酯是主要目标物,总有机碳、总溶解固体和酸碱度与parabens的浓度具有相关性;城市污水中parabens的质量浓度具有明显的日变化趋势,但是季节差异性不大.本研究结果为城市污水处理系统中parabens的深入研究和污染控制提供了重要理论依据.     

不同国家基于健康风险的土壤环境基准比较研究与启示

20世纪90年代以来,许多发达国家颁布了基于健康风险的土壤环境标准及基准背景技术文件,为发展中国家启动标准制订和开展基准研究提供了重要的方法学参考.然而,由于各国在环境立法框架、基准推导过程、环境气候特征、土壤类型、人群生活方式与习惯等方面的不同,导致其基准名称、基准功能、保护受体以及基准取值等存在较大的差异.本文在综述基于健康风险的土壤环境基准科学内涵与基本特征的基础上,对不同国家场地土壤环境基准的名称、功能及基准值的差异进行了比较研究,从土地利用类型划分、暴露情景和暴露途径设定、致癌物可接受风险水平选择以及人体暴露参数确定等4个方面,对不同国家制定场地土壤环境基准的关键技术和影响因素进行了总结分析,探讨了借鉴国外经验考虑区域差异制定我国土壤环境基准的对策与方略,并指出了当前我国制定场地土壤环境基准和标准面临的困难和挑战.     

溶藻活性物质对棕囊藻溶藻及其脂肪酸影响的模拟

为了探讨芽孢杆菌B1分泌的胞外溶藻活性物质对球形棕囊藻的溶藻特性和藻毒素物质脂肪酸的影响,比较了模拟自然水体中叶绿素a、p H、溶解氧DO、高锰酸盐指数和营养元素N、P浓度在溶藻前后的变化,并利用GC-MS检测了球形棕囊藻脂肪酸的成分和含量.用体积比1∶100的芽孢杆菌B1胞外活性物质处理模拟水体14 d,发现水体中叶绿素a、p H值和高锰酸盐指数随处理时间的增加而降低,DO和N、P浓度随处理时间的增加而增加.在第14 d时,处理组水体中p H值由8.50降低到7.51,叶绿素a降低82.3%(P0.05),DO增加29.5%(P0.05),高锰酸盐指数降低55.2%(P0.01).NH+4-N、NO-2-N、NO-3-N和PO3-4-P浓度分别增加了0.46、1.50、6.24和1.30倍.投加活性物质处理14 d后,球形棕囊藻藻毒素中的主要3种脂肪酸C18:2、C16:0和C18:1分别降低了100%、97.7%和85.4%(P0.01),总脂肪酸含量降低83.4%(P0.01).结果表明,芽孢杆菌B1胞外溶藻活性物质在模拟自然水体中能有效抑制球形棕囊藻的生长,并降低藻毒素脂肪酸的含量.研究结果为芽孢杆菌B1胞外活性物质的生态安全性应用提供理论基础.