3D simulation of hydrogen ignition in a rapid compression machine

Low-temperature (at T < 900–950 K) ignition delays of hydrogen–air mixtures are mainly measured in rapid compression machines (RCM). This communication is aimed at numerical simulation of ignition delays of hydrogen–air mixtures in the RCM by means of a coupled three-dimensional (3D) Unsteady Reynolds-Averaged Navier–Stokes (URANS) – Particle Method (PM) simulation of RCM operation capable of catching turbulence–chemistry interaction. The study indicates that the time history of piston motion in an RCM affects the final state of a test mixture at the end of compression stroke and therefore influences the phenomena relevant to test mixture ignition. More specifically, the calculations show that different laws of piston motion at a fixed average piston velocity (i.e., fixed piston displacement and fixed compression time) and fixed compression ratio result in different evolution of mean pressure, temperature and velocity fields in the RCM test section leading to different ignition behavior. The reasons for the arising differences lie in the fact that the local instantaneous piston velocity determines the roll-up vortex structure, strength and turbulence dissipation in it, heat transfer in test-section walls, and mass leakage through piston rings.     

C2H6/CO2组分构成对瓦斯着火延迟时间的影响规律研究

为进一步研究多种不同性质的气体对瓦斯着火过程的影响,采用CHEMKIN-PRO Release软件,选择CH_4燃烧化学反应机理USC Mech 2.0模型对不同组分构成的C_2H_6/CO_2与甲烷混合气体进行数值模拟,然后分析不同组分下瓦斯着火延迟时间的变化趋势,并利用SENKIN程序对其进行敏感性分析。计算结果表明:当C_2H_6百分比小于CO_2百分比时,随着CO_2百分比的增加,瓦斯着火延迟时间略有增加,且其在T=1200K下延长了17.0%,在T=2200K下延长了8.4%,同时抑制CH_4生成的关键反应步敏感性系数下降幅度略大,其协同抑制瓦斯爆炸;当C_2H_6百分比大于CO_2百分比时,随着C_2H_6百分比的增加,瓦斯着火延迟时间大幅缩短,且其在T=1200K下缩短了63.7%,在T=2200K下缩短了35.5%,同时促进CH_4生成的关键反应步敏感性系数下降幅度大,其协同促进瓦斯爆炸。     

Effect of ignition delay on explosion parameters of corn dust/air in confined chamber

This paper presents the explosion parameters of corn dust/air mixtures in confined chamber. The measurements were conducted in a setup which comprises a 5 L explosion chamber, a dust dispersion sub-system, and a transient pressure measurement sub-system. The influences of the ignition delay on the pressure and the rate of pressure rise for the dust/air explosion have been discussed based on the experimental data. It is found that at the lower concentrations, the explosion pressure and the rate of pressure rise of corn dust/air mixtures decrease as the ignition delay increases from 60 ms; But at the higher concentrations, the explosion pressure and the rate of pressure rise increase slightly as the ignition delay increases from 60 ms to 80 ms, and decrease beyond 80 ms. The maximum explosion pressure of corn dust/air mixtures reaches its highest value equal to 0.79 MPa at the concentration of 1000 gm⁻³.     

Spatial modelling of socioeconomic data to understand patterns of human-caused wildfire ignition risk in the SW of Madrid (central Spain)

The majority of wildfires in the Mediterranean Basin are caused directly or indirectly by human activity. Many biophysical and socioeconomic factors have been used in quantitative analyses of wildfire risk. However, the importance and effects of socioeconomic factors in spatial modelling have been given inadequate attention. In this paper, we use different approaches to spatially model our data to examine the influence of human activity on wildfire ignition in the south west of the Madrid region, central Spain. We examine the utility of choropleth and dasymetric mapping with both Euclidean and functional distance surfaces for two differently defined wildfire seasons. We use a method from Bayesian statistics, the Weights of Evidence model, and produce ten predictive maps of wildfire risk: (1) five maps for a two-month fire season combining datasets of evidence variables and (2) five maps for the four-month fire season using the same dataset combinations. We find that the models produced from a choropleth mapping approach with spatial variables using Euclidian and functional distance surfaces are the best of the ten models. Results indicate that spatial patterns of wildfire ignition are strongly associated with human access to the natural landscape. We suggest the methods and results presented will be useful to optimize wildfire prevention resources in areas where human activity and the urban-forest interface are important factors for wildfire ignition.     

Experimental investigation of the influence of inert solids on ignition sensitivity of organic powders

This work presents the results of the experimental characterization of the ignition sensitivity of solid inertant/combustible powders mixtures. Three inert solids (alumina, Kieselguhr, aerosil) and eleven organic powders have been considered and the following parameters have been determined: (1) the minimum ignition energy, (2) the minimum ignition temperature in cloud and (3) the minimum ignition temperature in 5 mm layer. The effects of the addition of inert solids are described and a simple model is proposed to represent the experimental results.Generally, increasing inert solid content in a powder leads to a higher minimum ignition energy as well as a higher minimum ignition temperatures in cloud and in layer. In some cases, the flammability is influenced above a threshold concentration value, which can be quite high (up to 85 wt.%). Indeed, the proposed model shows a zone below the minimum ignition concentration (MIC), which does not enable an efficient or safe inerting: either the admixed inert solid does not provide a sufficient effect, or it can even facilitate the ignition of the dust by notably improving its dispersability.The influence of key parameters such as the thermal conductivity or optical properties on the efficiency of the inerting by admixed solid need to be further assessed in a future work in view to better understand the mechanisms involved and to extend the scope to other types of oxidizable materials.     

An evaluation of the implementation of ignition interlock in California

Problem: This study evaluates the degree to which courts have implemented California's ignition interlock program, and surveys judges and district/city attorneys to identify barriers to implementing a successful interlock program. Method: There are three parts to the evaluation. In the first, a sample of drivers arrested for driving on a driving under the influence (DUI)-suspended driver license was examined to calculate the rate at which courts order interlocks for DUI-suspended drivers, as required by California law. The second part of the study used Department of Motor Vehicle (DMV) records to count the statewide rate of court-ignition interlock device (IID) orders across time and jurisdictions. The final part surveyed judges, district/city attorneys, and offenders installing an interlock to obtain information about their use of interlock, barriers to implementing an interlock program, and the effectiveness of the devices in preventing drinking and driving. Results: It was found that conviction rates for driving while suspended are low; that judges order interlocks for only a fraction of the convicted driving-while-suspended (DWS) offenders who should receive such an order; and that the majority of offenders who are ordered by the court to install an ignition interlock in their vehicle do not do so. Impact on Industry: Any successful interlock program will need to find a way to balance the inability of many offenders to pay for the devices, with the need for the industry to remain economically viable.     

典型静电放电火花点燃危险性评价方法研究

通过研究典型静电放电火花的实际点燃能力 ,对实际生产工艺工程中的静电放电火花的点燃危险性进行定量评价。静电放电火花的放电相当能量、放电火花空间分布范围和放电火花持续时间 ,决定了静电放电火花实际点燃可燃物的可能性大小 ,因此不同类型的静电放电火花点燃可燃物的差异性很大。根据数据序列理论分析 ,引入静电放电火花点火源序列和可燃物危险性序列之间存在的关联性 ,反映了静电放电火花点燃可燃物的危险程度 ,可用于对静电放电火花的实际点燃危险性进行量化评价。对聚烯烃粉体生产工艺过程中典型和频发性的静电放电火花的点燃危险性进行了定量评价。     

Visualization and analysis of dispersion process of combustible dust in a transparent Siwek 20-L chamber

Dust explosion severities are closely associated with dust dispersion behaviors. To characterize the dispersion process of dust cloud, visualization experiments were conducted by using a transparent Siwek 20-L chamber. Dispersion processes of typical carbonaceous dust were recorded by a high-speed camera and, with the image processing technique, the qualitative analysis based on the transmission of dust cloud was carried out. Results have evidenced the three consecutive stages of dust dispersion process: the fast injection stage of dust particles, the stabilization stage and the sedimentation stage of dust cloud. The motion of dust particles and the variations of dust cloud in space and time can be clearly distinguished. In the stabilization stage, the good uniformity of dust dispersion is achieved when the deviation of transmission data at different locations reaches to the minimum value. Under different nominal dust concentrations, the time periods for dust dispersion stabilization are found to be significantly different, suggesting that different dust concentrations should correspond to different ignition delay in order to accurately measure the explosion characteristics in the Siwek 20-L chamber. Moreover, it is found that the decrease trend of transmission with increasing nominal dust concentration will become gradually leveling off, different from the inversely proportional relationship according to the Bouguer's law, and this indicates that the actual dust concentration will be lower than the nominal concentration or the dust cannot be fully dispersed at the case of high dust concentration. According to the experiment, when the nominal dust concentration exceeds to 1000 g/m³, the transmission will no longer vary visibly.     

Preoptimal analysis of phase characteristic indicators in the entire process of coal spontaneous combustion

To accurately predict the development degree of coal spontaneous combustion (CSC), the CSC process was investigated using a programmed high-temperature-heating experimental system, and the variation law of index gas concentration in the holistic process of CSC and oxidation is formulated. Additionally, the accuracy of the experimental system was evaluated using experimental design for thermal analysis, and the correlation between gas index and apparent activation energy was determined using grey correlation analysis. The results indicated the following. In the critical temperature stage (0–100 °C), φ(CO)/φ(CO₂) should serve as the main index and C₂H₄ should serve as the auxiliary index; in the crack-active-speedup temperature stage (100–260 °C), CO and φ(C₂H₄)/φ(C₂H₆) should serve as the main index and R₁, the Graham index, and φ(C₂H₄)/φ(CH₄) should serve as auxiliary indexes; in the speedup-ignition temperature stage (260–370 °C), R₂ and the Graham index should serve as main indexes and φ(CO)/φ(CO₂), C₂H₄, and R₁ should serve as auxiliary indexes; in the ignition temperature (370–500 °C), R₃ should serve as the main index and R₂, the Graham index and C₂H₄ should serve as auxiliary indexes. Among them, the grey correlation degrees among the Graham index, Grignard fire coefficient, and apparent activation energy were the highest, reaching 0.91.