Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

Flame Propagation Across Gelled Alkane-In-Water Emulsions

Flame propagation rates were measured for flames spreading across surfaces of gel-like alkane-in-water emulsions. A long, slender, water-cooled trough was used to contain the mixtures. Abrupt changes in the flame propagation velocities - of nearly two orders of magnitude - were observed to occur near ‘critical’ concentrations of certain alkane/water mixtures. Four alkanes were used - pentane, hexane, heptane, and octane - and fuel rich emulsions (in which water was the continuous phase) were employed. The ability of the aqueous phase of the emulsion to inhibit the release of fuel into the vapor phase plays an important role in the observed behavior. That is, the rate at which fuel can diffuse through both the emulsion and the thin liquid layers that reside on it, is an essential kinetic aspect of the phenomena which determine the flame propagation rate across gelled alkane-in-water emulsions.     

实时合成水滑石分离模拟放射性核素锶的研究

采用实时合成水滑石的方法从高放废液中分离模拟放射性核素锶,通过单因素实验并借助XRD分析确定了最佳分离实验条件,同时,运用FTIR、SEM等技术手段对合成的含锶水滑石的结构、形貌进行了分析.结果表明,当Sr2+初始浓度为70mg.L-1、pH值为10.5、n(Mg+Sr)/n(Al)为3时,锶的去除率最高可达95%以上;XRD和SEM分析结果表明,锶嵌入了水滑石的晶格中,合成的含锶水滑石形貌为层状六边形;含锶水滑石煅烧产物主要为尖晶石,且煅烧产物中未见氧化锶,表明嵌入到水滑石晶格中的锶在煅烧后存在于尖晶石的晶体结构中.     

聚合物/表面活性剂二元体系对油水界面性质的影响

文章应用界面张力仪、Zeta电位仪和表面黏弹性仪测定了聚合物、表面活性剂及其二元复合体系的质量浓度对油水界面性质的影响,并应用透射电镜观察了采出液的液膜结构。结果表明,随着聚合物质量浓度的增加,油水界面的界面剪切黏度值和界面张力值增大,颗粒表面Zeta电位的绝对值增大;随着表面活性剂质量浓度的增加,油水界面的界面剪切黏度变化幅度很小,但界面张力显著减小,颗粒表面Zeta电位绝对值增大;聚合物与表面活性剂复合能够形成稳定的聚合体,具有较大的界面剪切黏度值,较小的界面张力和较高的Zeta电位值;体系中聚合物、表面活性剂及水中悬浮物形成了类似"晶体"结构。     

氨法烟气脱硫循环液沉降试验研究

通过湿法烟气脱硫副产硫酸铵生产工艺中的循环母液混凝试验,讨论母液的沉降性能,初步探讨母液被循环浓缩的程度对混凝处理效果的影响。     

ACP1000除气塔液体冷却器抗震分析设计

目的对除气塔液体冷却器进行抗震分析,以确保其在地震下必要的安全功能。方法以福清5/6号核电工程为背景,通过有限元软件ANSYS建立除气塔液体冷却器有限元模型,采用反应谱法进行设备的抗震分析与评定。结果通过抗震分析评定,发现设备鞍座为设计薄弱区域,故修改鞍座的结构形式,包括新增筋板、增加壁厚,使该设备的设计满足了相关规范的要求。结论通过修改鞍座的结构形式,确保其必要的安全功能得以实现,满足实际工程的需要。     

Recent Levels of Radionuclide Contamination in the Eastern Ural Radioactive Trace and Biological Effects in Local Populations of <Emphasis Type="Italic">Plantago major</Emphasis> L.

The results of the study have shown that the stocks of ⁹⁰Sr and ¹³⁷Cs in the frontal part of the EURT are 6700–15000 and 200–400 kBq/m², respectively. The coefficients of their accumulation in different herbaceous plant species in this impact zone are lower than in other areas. The accumulative capability of plants has probably decreased in the course of selection as an adaptation to the effect of radiation. The viability and growth parameters of Plantago major L. seeds from the EURT zone are similar to those of seeds from the background sample. Cenopopulations chronically exposed to radiation are characterized by a higher mutation rate in the progeny and an unstable response to additional acute irradiation in most characters studied. A high level of inbreeding is observed in all P. major cenopopulations of plantain. The cenopopulation of the impact zone is characterized by a lower variation of allozyme loci, which may be a result of stringent selection for individuals better adapted to the complex of conditions existing in its habitat.     

加速溶剂萃取-在线净化-液相色谱串联质谱法检测污泥堆肥样品中三氯生和三氯卡班

污泥堆肥样品基质复杂,其中三氯生（TCS）和三氯卡班（TCC）的提取和净化过程操作烦琐、回收率低。通过对净化条件进行优化,建立了加速溶剂萃取-在线净化-液相色谱串联质谱法检测污泥堆肥样品中TCS和TCC的分析方法,并对上海某污水厂实际污泥堆肥样品中的TCS和TCC进行定量分析。结果表明,TCS和TCC的检出限分别为0.003和0.0002μg/g,加标回收率为90.3%~99.8%,相对标准偏差（RSD）为1.2%~8.5%（n=6）。该方法样品前处理时间短、回收率高、试剂使用量少,能够满足实际污泥堆肥样品中TCS和TCC的检测要求。     

连续起伏管道投产过程中的气相运移研究*

为应对山区液体管道在投产过程中可能出现的气阻、超压问题,从气相运移角度出发,建立液顶气模型,研究在1个U型单元内积气形成、压缩和破碎的全过程,在此基础上,提出连接各个U型单元的气相的传递函数,探讨背压累积因素下,连续起伏管道投产过程中各个U型管段的积气情况和压力的变化,进行动态的建模和计算。以国内某原油管道的现场投产数据与模型结果进行比对。结果表明:可以更加准确地预测山区液体管道投产过程中的气相传递和压力变化过程,能为未来连续起伏大落差液体管道投产的安全稳定运行提供理论指导和技术支持。     

温度交变下液态乙烷回气管线热应力数值计算与现场测试*

为解决低温交变载荷下液态乙烷回气管线面临的安全问题,采用有限元法和现场试验研究管线在低温交变载荷下无裂纹和含轴向裂纹管线的热应力分布。结果表明:管内温度沿周向和轴向分布具有较大的不均匀性,内外壁温度分布趋势基本相似;随着计算时间的延长,管线整体热应力先增大再减小;卸压、温度回升过程中,管内温差逐渐减小,热应力逐渐减小;裂纹处的热应力大于远离裂纹及无裂纹处的热应力;对管线热应力变化进行现场监测,试验数据与仿真结果吻合。研究结果可为低温情况下液态乙烷回气管线的方案设计提供参考和指导。