整合消费与增加值视角的中国行业碳排放变动分解研究

在研究影响我国CO 2排放因素领域,基于投入产出技术的分解模型已成为主要的分析工具,现有研究多分别基于消费视角或收益视角展开分析。为全面评估各行业收益与消费对其上游、下游行业碳排放的综合影响,整合基于收益与基于消费两个视角,运用2012年与2015年我国投入产出表,构建两层嵌套式结构分解分析模型(SDA),比较分析消费规模效应、收益规模效应、行业流入、流出增加值变动效应、增加值结构变动效应等14个影响各行业碳排放变动的关键因素,并借助对消费者原则碳排放估算公式的重构,更准确地实现从增加值视角对各行业消费者原则碳排放变动的关键影响因素分析。研究发现:①研究期内,我国在总产出增长29.14%的同时碳排放量上升1.46%,各行业碳排放强度下降是主要的减排因素,其中建筑业减排贡献最大。②增排效应方面,影响从大到小依次为消费规模、收益规模、完全投入结构与完全消费结构四项效应,且前两个规模效应的影响是后两个结构效应的2倍以上,尤其建筑业消费规模效应、煤炭采选产品业收益规模效应增排较大。③消费规模扩大导致增排的原因并非行业本身生产规模扩大,而主要在于建筑业、服务业等行业规模扩张时吸收其他行业流入的增加值量增多。④收益规模扩大导致的增排效应方面,细分来说从大到小依次为劳动者报酬、生产税净额、固定资产折旧、营业盈余四项效应,且行业差异显著,如煤炭采选产品业的劳动者报酬效应,石油、炼焦产品和核燃料加工品业的生产税净额效应以及电力、热力生产和供应业的营业盈余效应增排贡献较大,而煤炭采选产品业的营业盈余效应、批发、零售业和住宿、餐饮业的生产税净额效应则减排贡献较大。     

Mg3MnxAl1-xCO3类水滑石衍生NSR催化剂的制备及其性能评价

采用共沉淀法合成了三元类水滑石Mg_3Mn_xAl_(1-x)CO_3,通过高温煅烧得到其衍生氧化物Mg_3Mn_xAl_(1-x)O_m,再经浸渍负载Pt或BaO后制得新型NO_x存储/再还原(NSR)催化剂。XRD及SEM表征结果显示,当Mn与Al的摩尔比(Mn/Al)大于1时所制备的Mg_3Mn_xAl_(1-x)O_m有杂晶相出现且发生团聚,结合NO_x存储性能评价结果,确定最优Mn/Al为1。BaO负载不利于NO_x的存储,而当Pt负载量为1%(w)时NO_x存储性能最优,250℃条件下的存储量由负载前的0.52 mmol/g提升至0.61 mmol/g。CO_2与NO_x之间存在较强的竞争吸附。负载1%Pt催化剂的NSR性能评价结果表明,8个稀燃-富燃循环后NO_x的去除率为68%,表明催化剂的还原性能仍需加强。     

脱硝催化剂的失活机理及其再生技术

采用SEM、XRD和XRF对电厂失活脱硝催化剂进行表征,探讨其失活原因和机理。结果表明:电厂脱硝催化剂失活的主要原因是活性组分V的流失及碱金属K、碱土金属Ca和As元素造成的催化剂中毒,烟气中飞灰的沉积也有一定的影响。经吹扫、水洗、酸洗和V负载再生,催化剂的各项物化性质基本恢复,NOx转化率基本达到新鲜催化剂的水平。水洗主要去除催化剂中的碱金属,酸洗主要去除As2O3,负载V补充催化剂活性组分。V再生催化剂在较高温度下的抗硫性能更好。     

我国废钢加工装备发展现状与展望

以绿色经济和循环经济的重大需求为背景,系统阐述了废钢加工装备的现状与发展,详细介绍了废钢加工装备的种类与用途,分析并总结了废钢加工装备的应用现状,指出了废钢加工装备以及废钢加工行业的发展方向。     

Population viability and harvest sustainability for Madagascar lemurs

Subsistence hunting presents a conservation challenge by which biodiversity preservation must be balanced with safeguarding of human livelihoods. Globally, subsistence hunting threatens primate populations, including Madagascar's endemic lemurs. We used population viability analysis to assess the sustainability of lemur hunting in Makira Natural Park, Madagascar. We identified trends in seasonal hunting of 11 Makira lemur species from household interview data, estimated local lemur densities in populations adjacent to focal villages via transect surveys, and quantified extinction vulnerability for these populations based on species-specific demographic parameters and empirically derived hunting rates. We compared stage-based Lefkovitch with periodic Leslie matrices to evaluate the impact of regional dispersal on persistence trajectories and explored the consequences of perturbations to the timing of peak hunting relative to the lemur birth pulse, under assumptions of density-dependent reproductive compensation. Lemur hunting peaked during the fruit-abundant wet season (March–June). Estimated local lemur densities were roughly inverse to body size across our study area. Life-history modeling indicated that hunting most severely threatened the species with the largest bodies (i.e., Hapalemur occidentalis, Avahi laniger, Daubentonia madagascariensis, and Indri indi), characterized by late-age reproductive onsets and long interbirth intervals. In model simulations, lemur dispersal within a regional metapopulation buffered extinction threats when a majority of local sites supported growth rates above the replacement level but drove regional extirpations when most local sites were overharvested. Hunt simulations were most detrimental when timed to overlap lemur births (a reality for D. madagascariensis and I. indri). In sum, Makira lemurs were overharvested. Regional extirpations, which may contribute to broad-scale extinctions, will be likely if current hunting rates persist. Cessation of anthropogenic lemur harvest is a conservation priority, and development programs are needed to help communities switch from wildlife consumption to domestic protein alternatives.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

基于数字信息化的消防呼吸气瓶检验管理系统研究与开发

为解决碳纤维缠绕式消防呼吸气瓶检验中因单机作业而存在的检验效率低、检验质量差、受人为因素影响的问题，研究开发基于数字信息化的碳纤维缠绕式消防呼吸气瓶检验管理系统，该检验系统包括消防呼吸气瓶数据库、OA系统、呼吸气瓶检验软件和手机APP。利用二维码技术和计算机网络，实现呼吸气瓶数据库、检验软件、OA约检和报告审核审批系统、手机APP的数据传输。结果表明:该检验管理系统实现了呼吸气瓶检验的无纸化、过程的可追溯性、检验结果的防伪性等功能，其对于碳纤维缠绕式消防呼吸气瓶检验具有较强的适用性和可行性。     

地表水环境遥感监测关键技术与系统

本文主要是围绕地表水环境遥感检测展开讨论,全面介绍了水环境检测的关键技术和系统,建立改进双峰法的水体分布遥感提取方法,并以具体地区为例进行分析,采用不同方法建立解析方法,从根本上提升反演方法的区域和积极适用性,希望能够对相关人员起到参考性价值。     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Experimental research of LNG accidental underwater release and combustion behavior

Evaluating potential hazards caused by accidental LNG release from underwater pipelines or vessels is a significant consideration in marine transportation safety. The aim of this study was to capture the dynamic behavior of LNG jet released under water and to analyze its vapor dispersion characteristics and combustion characteristics on the water surface during different release scenarios. Controlled experiments were conducted where LNG was jet released from a cryogenic storage tank. The dynamic process of LNG being jet released from orifices of different sizes and shapes, as well as the rising plume structure, were captured by a high-speed camera. The leakage flow rate and pipeline pressure were recorded by a flow meter and pressure gauge, respectively. The concentration distribution that emanated from the water surface was measured utilizing methane sensors in different positions with various wind speeds. The flame combustion characteristics of LNG vapor clouds, which immediately ignited upon the enclosed water tank, were also recorded. Additionally, the mass burning rate of the flame on the water surface was evaluated, and a new correlation between the ratio of flame length and width was established. The results indicated a large dimensionless heat release rate (Q*) and a continuous release flow rate in a limited burning area. This study could provide greater understanding of the mechanisms of LNG release and combustion behavior under water.