Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3- on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60℃. P(AA/AMHA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3-. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

Quantitative analysis of microbial biomass yield in aerobic bioreactor

We have studied the integrated model of reaction rate equations with thermal energy balance in aerobic bioreactor for food waste decomposition and showed that the integrated model has the capability both of monitoring microbial activity in real time and of analyzing biodegradation kinetics and thermal-hydrodynamic properties. On the other hand, concerning microbial metabolism, it was known that balancing catabolic reactions with anabolic reactions in terms of energy and electron flow provides stoichiometric metabolic reactions and enables the estimation of microbial biomass yield (stoichiometric reaction model). We have studied a method for estimating real-time microbial biomass yield in the bioreactor during food waste decomposition by combining the integrated model with the stoichiometric reaction model. As a result, it was found that the time course of microbial biomass yield in the bioreactor during decomposition can be evaluated using the operational data of the bioreactor (weight of input food waste and bed temperature) by the combined model. The combined model can be applied to manage a food waste decomposition not only for controlling system operation to keep microbial activity stable, but also for producing value–added products such as compost on optimum condition.     

Degradation of monofluorophenols in water irradiated with gaseous plasma

Decomposition of aqueous monofluorophenols (MFPs) was investigated by contact glow discharge electrolysis (CGDE). During CGDE, both MFPs and the corresponding total organic carbon (TOC) in water were consumed smoothly, suggesting that carbon atoms of benzene nucleus could be eventually mineralized to inorganic carbon (IC). And all the fluorine atoms in the MFPs were equally converted to fluoride ions. Based on the primary intermediates from each starting materials, it showed that aromatic hydroxylation preferentially occurred at the para- or ortho- position to the phenolic OH group of each MFPs. The disappearance of both MFPs and TOC followed the first-order rate law. The apparent rate constants for the decay of MFPs were independent from the pK_a values of MFPs.     

日本交通部门碳排放与低碳交通相关因素研究

本文就日本向低碳社会体系转型的过程中,交通部门碳排放现状、都市交通体系构成、实施对策等方面进行了分析,探讨其交通运输领域低碳交通的相关因素及发展模式,为中国低碳交通体系的构建提供参考。     

ABR反应器中COD/SO_4~(2-)值和硫酸盐负荷对SO_4~(2-)去除影响

利用厌氧折流板反应器,分别考察了反应器启动,及不同COD/SO42-比值和硫酸盐负荷对模拟废水中SO42-去除的影响。实验在(32±0.1)℃,pH为6.0⁶.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 5006.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 500³ 500 mg/L),SO42-去除率逐渐下降,最低为60%,相反SO42-去除速率随着硫酸盐浓度的增加而增加,最大为7.98 kg(/m3.d);维持恒定的硫酸盐浓度(1 500 mg/L),逐渐缩短水力停留时间以提高反应器中硫酸盐负荷,SO42-去除率呈现先上升后下降的复杂变化趋势,当水力停留时间为6 h时,SO42-去除率达到最大;随着COD/SO42-比值的提高,硫酸盐去除能力增强,且反应体系对硫酸盐负荷的耐受能力也逐渐增强。     

天水市二氧化硫浓度与硫酸盐化速率的相关性分析

以2001～2010年十年间天水市城区二氧化硫浓度与硫酸盐化速率的监测数据为依据,对城区二氧化硫与硫酸盐化速率的浓度水平和变化规律进行了研究,分析和探讨了二氧化硫浓度与硫酸盐化速率相关性。     

西安市再生水利用存在问题及预测分析研究

污水作为一种稳定可靠、再生利用的水资源,经深度处理后可用作工业冷却水、城市杂用水、河流景观补充水及农业灌溉等方面。合理开发和利用再生水是解决水资源缺乏的有效途径。本文通过深入调查、分析西安市再生水利用现状,找出再生水利用率低的原因,提出针对性措施,并对防治对策进行定量分析,预测2015年西安市“污水再生利用率”为30．6％,可达到20％的国家考核要求。     

秸秆与生物炭还田对土壤团聚体及固碳特征的影响

揭示秸秆与生物炭还田对团聚体有机碳含量、分布、稳定性以及相对贡献率的影响,有利于明确秸秆与生物炭还田下土壤碳库的稳定性及其保护机制.采用田间试验方法研究了油菜/玉米轮作模式下,秸秆与生物炭还田对土壤团聚体及固碳特征的影响.结果表明:(1)秸秆与生物炭还田各处理均能提高土壤有机碳含量,其中生物炭还田(BC、16.88 g·kg~(-1))、秸秆+生物炭还田(CSBC、17.37 g·kg~(-1))效果优于秸秆还田(CS、13.76 g·kg~(-1))和秸秆+速腐剂还田(CSD、14.68 g·kg~(-1)).(2)与对照(CK)处理相比,CS、CSD处理能显著地提高大团聚体(2 mm)含量,增加率为94.00%~117.78%,同时显著提高了水稳性团聚体的平均重量直径(MWD)、几何平均直径(GMD)、R0.25,降低了分形维数(D),提高了团聚体稳定性(P0.05).(3)随着团聚体粒径的增大,团聚体有机碳含量呈现先降低再增高然后再降低,且粉黏粒(0.053 mm)对土壤有机碳贡献率最高(29.61%~42.18%),大团聚体有机碳贡献率最低(9.19%~17.81%).除CSD处理外,CS、BC、CSBC处理降低了较大团聚体(2~0.25 mm)和微团聚体(0.25~0.053 mm)有机碳贡献率.秸秆还田促进土壤团聚作用效果优于生物炭还田,而生物炭还田提高团聚体有机碳含量效果优于秸秆还田,秸秆新碳主要向大团聚体内分配,秸秆+速腐剂还田还能促进较大团聚体内不同组分结合新碳,生物炭、秸秆+生物炭还田主要向微团聚体中富集.     

不同前茬冬小麦土壤呼吸特征及影响因子分析

以不同蔬菜前茬处理的冬小麦田为对象,研究土壤呼吸变化特征、各影响因子对土壤呼吸的响应的通径分析以及计算全生长季农田碳汇强度.结果表明：①温度对土壤呼吸速率的响应随深度增加具有滞后性;土壤呼吸与土壤水分呈显著二次相关.②有效磷、速效钾、土壤脲酶、土壤温度、土壤水分对土壤呼吸变化的贡献较大,为主要影响因子.5种主要因子中土...