原子吸收法测定海水中铁含量的不确定度评定

为了保证海水中铁元素含量的检测质量,更好地深入了解铁在整个海水体系的生物地球化学中扮演的角色,需科学地评定检测结果的分散性。文章依据《测量不确定度的评定与表示》(JJF1059-1999)的理论,以浙江近海海水为例,评定原子吸收法测定海水中铁含量的不确定度。测得浙江近海样品中铁的浓度为5.2μg/L,扩展不确定度U=0.8μg/L(k=2)。通过对各不确定度分量进行评定发现,利用该方法测定海水中铁含量时,对其合成标准不确定度的主要贡献来自于样品制备过程,尤其是萃取过程。     

金属铜原子氧效应研究

目的获取金属铜空间原子氧环境适应性数据,提升材料空间环境适应性设计水平。方法将金属铜样品置于射频源原子氧辐照面积内开展原子氧辐照试验,束流密度为2.5×1016/(cm2·s),最长辐照时间为300 min。研究随辐照时间增加样品表面成分、形貌以及性能的变化。结果原子氧辐照后,金属铜表面变得粗糙,300 min辐照样品出现了氧化层脱落现象;随辐照时间增加,样品质量呈增加趋势,300 min辐照样品质量增加0.035 mg;试验后样品太阳吸收比升高最大值达0.07,光谱反射系数下降;原子氧作用导致金属铜表面疏水性能提高,摩擦磨损性能下降。结论得到了金属铜原子氧环境效应数据,可为航天器空间环境效应防护设计提供技术支撑。     

H2S匀圆杂选择性催化氧化工艺及催化剂研究现状

论述了石油流化催化裂化烟气中H2S气体的选择性催化氧化处理工艺和工艺中所使用的各种类型选择性氧化催化剂.目前已发展并投入使用的选择性氧化工艺主要有:Superclaus工艺、Euroclaus工艺、Clinsulf-Do工艺、BSR/Hi-Activity工艺、Selectox工艺和Modop工艺等,各工艺具有不同的特点和应用范围.H2S选择氧化催化剂主要包括以下几种体系:碳体系、SiC载体体系、分子筛体系、氧化物体系和柱撑黏土体系等.其中碳体系和氧化物体系的研究开展的较早较多,关于分子筛体系的研究近期有所减少,SiC是研究人员认为非常有潜力的一个载体体系,其相关体系研究也一直在进行之中,柱撑黏土体系还处于初步研究阶段,离实际应用尚有距离.     

KrBr*准分子灯直接光解一甲胺气体

研究了正弦电源驱动的207 nm KrBr*准分子灯光解气相中的一甲胺(MA).考察了降解的影响因素(气体流速、初始浓度、输入功率),测定了灯的输入功率和辐射光谱.为了评价光解过程,对去除效率、能率、碳平衡和CO2的选择性这4个参数进行了研究.结果表明,去除率随着灯的输入功率升高、气体流速的降低以及气体初始浓度的升高而升高.能率与一甲胺初始浓度呈正相关性,输入功率为65.1 W时能率最高.输入功率升高,气体流速下降,碳平衡和CO2选择性都略有升高.当灯的输入功率为79.8 W,气体流速9.0 m3·h-1,初始浓度为2 897 mg·m-3,一甲胺去除率为56.8%,能率为185.6g·(kW·h)-1,相应的碳平衡和CO2选择性为16.8%和10.3%.最后,利用气质联用仪测定了一甲胺降解的产物,结合一甲胺的吸收光谱,推测了一甲胺的光解机制.     

生物陶粒反应器的氢自养反硝化研究

利用氢自养反硝化生物陶粒反应器处理硝酸盐废水,探讨了生物陶粒反应器中氢自养反硝化生物脱氮的实现过程.考察了水力停留时间、进水硝氮负荷、进水pH值、温度、供氢量等因素对反应器脱氮效果的影响.结果表明,当水力停留时间为24 h和48 h时,反应器对硝酸氮的平均去除率分别达到94.54%和97.47%.在水力停留时间为5~16 h时,NO-3-N去除率随水力停留时间的缩短而降低;进水NO-3-N浓度较低时,NO-3-N的降解速率随其浓度的升高而增大,当NO-3-N浓度大于110mg·L-1时,氢自养反硝化反应受到抑制;中偏碱性环境较酸性或碱性环境更利于反应器对硝酸盐的去除;反应器有较宽的温度适应范围,最适温度为25~30℃;当反应器供氢不足时,脱氮效果明显降低,表明了氢自养反硝化菌对氢气利用的专一性.在整个运行阶段,出水中亚硝酸氮浓度一直保持在较低水平.     

浅谈火焰原子吸收分光光度计应用重金属分析的优缺点

随着逐渐使用原子吸收分光光度计来分析重金属,本文阐述实际使用火焰原子吸收分光光度计中的一些优缺点,达到爱护贵重仪器,同时提高分析应用水准目的。     

左氧氟沙星的超声/H2O2联合降解研究

采用超声/H2O2高级氧化技术对喹诺酮类抗生素左氧氟沙星进行降解,考察了H2O2浓度、超声功率、溶液初始pH值对反应过程的影响.结果表明,与单独超声和H2O2氧化相比,超声/H2O2对左氧氟沙星具有明显的协同降解作用. H2O2 添加浓度在3.0~20.0mmol/L范围, 左氧氟沙星的降解率随其添加浓度的增加而增加;超声功率在260W时降解效果最佳;左氧氟沙星初始浓度在10~30mg/L范围内,左氧氟沙星的降解量随其初始浓度的增加而增加;超声/H2O2降解左氧氟沙星在未调节(pH 7.14)效果最佳. HPLC分析发现降解过程主要有2种产物生成, 产物的生成和分布受体系pH的影响较大.     

UV和H2 O2联合消毒灭活饮用水中大肠杆菌研究

以大肠杆菌为研究对象,对单独紫外线(UV)、H2O2及两者不同组合方式的灭活效果进行了分析.结果表明,单独H2O2对大肠杆菌基本无灭活效果,加入浓度为20 mg·L-1的H2O2接触时间为30 min时,灭活率仅为0.02个对数级;单独UV工艺可在一定程度上灭活大肠杆菌,紫外线剂量为10 mJ·cm-2时,灭活率可达到4.51个对数级.紫外线和H2O2联合消毒在一定程度上提高了消毒效果,且不同的组合方式对灭活效果有很大的影响.先UV后H2O2消毒效果优于先H2O2后UV,当紫外线剂量为5 mJ·cm-2时,加入H2O2分别反应2.5、5、10、20 min后,两者的灭活率分别较单独UV消毒增加0.09、0.35、0.38、0.68和0.01、0.07、0.14、0.53个对数级.而UV与H2O2同时消毒效果优于UV与H2O2顺序消毒,当紫外线剂量为5 mJ·cm-2时,加入H2O2反应20 min后,灭活率较UV-H2O2和H2O2-UV工艺分别增加了0.43和0.58个对数级.随着紫外线强度的增加,大肠杆菌的灭活效果不断提高.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.