几种水合金属氧化物的磷酸根吸附性能

利用简单的碱沉淀法制备不同的水合金属氧化物,并对所得七种水合金属氧化物的磷酸根吸附等温线进行了系统的探讨比较.研究表明,25℃条件下,Al、Fe、Ni、Cu和Ce的水合金属氧化物对磷酸根的吸附最符合Langmuir线性吸附方程,而水合氧化锌和水合氧化钴吸附剂最符合线性等温线模型.所有这七种水合金属氧化物对磷酸根的吸附都...     

检测实验室盲样考核及其质量控制

盲样考核及其质量控制是检测实验室的必要条件.从检测实验室角度,论述了盲样考核及质量控制的过程,结合理化分析、原子吸收火焰和石墨炉、气相色谱等典型实例进行分析总结,并进一步探讨了盲样考核及其过程和结果质量控制的多种策略和方法,具有实用性.     

环讯瞭望

环保部:环保部最新发布辐射环境未受影响据环保部网站3月30日消息,环保部(国家核安全局)有关负责人介绍说,环保部(国家核安全局)3月30日16时继续发布全国省会城市和部分地级市辐射环境自动监测站实时连续空气吸收剂量率监测值。监测结果表明日本核电事故未对我国环     

内蒙古包头放射性废物库安全运行25年

文章简要论述了内蒙古包头放射性废物库现状、扩建工程及环境整治工程概况,通过对库区、库外辐射环境质量监测,放射性处于一般环境水平,废物库运行20多年来,未对周围环境造成污染,通过整治工程的建设,达到了预期治理要求,废物库运行是安全的。     

2-丁烯醛生产废水中溶解性有机物的分级解析

采用超滤膜法将2-丁烯醛生产废水中的有机物分为相对分子质量不同的7个级分,并应用溶解性有机碳(dissolved organic carbon,DOC)、紫外吸收光谱(ultraviolet spectrum,UV)、傅里叶变换红外光谱(fourier transform infrared spectrometer,FT-IR)和气相色谱/质谱联用仪(gas chromatography with mass spectrometry,GC-MS)技术对不同相对分子质量区间的有机物所占比例及物质结构进行了研究.结果表明,废水中相对分子质量1×103的有机物所占比例最高,达到88.57%;采用GCMS对废水中相对分子质量1×103的级分进行分析,定性出27种化合物,包含醛、酮、酯、醇、酚、酸、烷烃类及其他苯系物等,其峰面积占有机物峰面积总和的比例分别为6.9%、5.3%、35.4%、13.2%、4.6%、0.4%、1.7%、16.8%,总和为84%.UV和FT-IR分析结果均显示不同相对分子质量区间的光谱吸收特征没有明显差别,级分中存在含有不饱和双键、羟基、羰基化合物及芳香族化合物,与GC-MS检测结果相吻合.研究结果为废水处理工艺的开发与优化提供了重要的指导作用.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

我国辐射环境自动监测系统建设的回顾与展望

辐射环境自动监测是我国辐射环境监测工作的重要内容,是核与辐射安全监管工作的重要手段.本文回顾了“十一五”以来,我国辐射环境自动监测系统建设的进展情况和在核与辐射监管工作中所发挥的作用,总结了辐射环境自动监测系统的建设和运行经验,并对今后的工作进行了展望,提出了完善系统建设和运行的合理化建议.研究指出,作为国家辐射环境监测网的重要组成部分,辐射环境自动监测系统初步具备了对我国省会城市和主要地级城市的辐射环境质量状况的实时监测能力.但由于我国辐射环境自动监测站于2008年底才开始在全国范围内建设,起步较晚、经验不足,依然存在点位数量和代表性不够、自动化程度不够高、软件系统功能不成熟、标准化和规范化问题比较突出,缺乏质量控制技术、运行维护难度大等问题.为此本文提出：第一,增加自动监测站数量,点位布设更有针对性;第二,增加自动监测站的类型;第三,加强软件系统的分析和控制能力;第四,完善相关标准、技术规范和质保体系;第五,完善运行维护体系;第六,增强国际学习和交流.     

深圳市天然γ辐射空气吸收剂量率调查

从2007年至2011年在深圳市进行了天然γ辐射空气吸收计量的调查.调查结果显示：全市天然辐射外照射空气吸收剂量率的变化范围为（4.87 ～17.68）×10^ 8Gy/h,平均值为10.00 ×10^ 8Gy/h,与广东省平均水平相当,稍高于全国平均值,属于正常天然本底范围;天然辐射外照射致深圳市居民人均年有效剂量当量（0.22 ～ 1.08） mSv,低于广东省与全国的平均水平;集体有效剂量当量54.32×10^2man· Sv.