HP-5毛细管柱气相色谱法分离水中滴滴涕色谱条件研究

本试验利用HP-5毛细管柱,气相色谱法对水中滴滴涕几种衍生体的分离条件进行了研究和优化,找到了最佳仪器条件,为水中滴滴涕的检测提供了一定的试验参考。     

差压法测定水样中的BOD5

差压法（压力感测法）是测定BOD5的一种简单可靠的方法,OxiTop即是基于这一原理的BOD测量系统,经试验验证分析,该方法操作简单、结果准确,是目前测定BOD5较好的一种方法。     

Isolation of marine benzo[a]pyrene-degrading Ochrobactrum sp. BAP5 and proteins characterization

A bacterial strain BAP5 with a relatively high degradation ability of benzo[a]pyrene (BaP) was isolated from marine sediments of Xiamen Western Sea, China and identified as Ochrobactrum sp. according to 16S rRNA gene sequence as well as Biolog microbial identification system. Strain BAP5 could grow in mineral salt medium with 50 mg/L of BaP and degrade about 20% BaP after 30 d of incubation. Ochrobactrum sp. BAP5 was able to utilize other polycyclic aromatic hydrocarbons (PAHs) (such as phenanthrene, pyrene and fluoranthene) as the sole carbon source and energy source, suggesting its potential application in PAHs bioremediation. The profile of total soluble protein from Ochrobactrum sp. BAP5 was also investigated. Some over- and special-expressed proteins of strain BAP5 when incubated with the presence of BaP were detected by two-dimensional polyacrylamide gel electrophoresis, and found to be related with PAHs metabolism, DNA translation, and energy production based on peptide fingerprint analysis through matrix-assisted laser desorption/ionization-time of flight mass spectrometry.     

High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model (GPV-MSM) data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable di erences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.     

V2O5/CeO2催化剂用于低温NH3-SCR的性能研究

采用浸渍法制备了系列V2O5/CeO2催化剂,用于低温NH3选择性催化还原(NH3-SCR)NO.同时,考察了催化剂中V2O5负载量和煅烧温度对催化活性的影响,并运用SEM,BET和XRD物理化学技术对催化剂进行了表征.结果表明,V2O5/CeO2催化剂对模拟烟气中的NO转化呈现出较高的活性,但是V2O5负载量和催化剂的催化活性并不呈线性递增的关系.当V2O5负载量超过10%时,催化剂的催化活性开始下降.随着煅烧温度的升高,由于钒酸铈的生成,催化剂的催化活性下降.400℃为最佳煅烧温度.     

A methodology for assessment of long-term exposure to whole-body vibrations in vehicle drivers to propose preventive safety measures

Introduction: The appearance of musculoskeletal disorders (MDs) in professional drivers due to exposition to whole-body vibration (WBV) makes it relevant to assess this exposure. The European Directive 2002/44/EC has two methods to evaluate exposure to WBV (defined in ISO2631-1:2008). These methods evaluate the exposure associated with an 8-hour working day; however, MDs due to WBV could also be caused by accumulated exposure to vibrations over long term, and hence, the methods defined in the European directive may be limited in their ability to ensure the safety of workers exposed to WBV throughout their years of employment. Method: A detailed comparison and discussion of methods defined in the European Directive and the ISO2631-5:2018 was used as a starting point of the main results of this paper. On this basis, a new methodology for the management and organization of preventive measures is proposed to consider the assessment of ISO2631-5:2018 standard and the full working life of workers. Experimental data to assess exposure to WBV in heavy equipment vehicle (HEV) drivers under different road surface conditions and range of velocities were considered to illustrate the process of the proposed methodology. Results: The methods defined in the standards provide different assessments leading to a different possible consideration of safe operations when the risks associated with them may actually be high. The proposed methodology can be used with the aim of ensuring safety of workers throughout their working lives and providing an easy implementation of the calculations of ISO2631-5:2018 standard. Conclusions: A procedure to assess the health risk probability to which the HEV worker is exposed in terms of the exposure years and a different range of operational vehicle speeds is proposed and exemplified with a study case. Practical applications: This study provides a practical tool for the management of WBV exposure related to work-tasks in HEV drivers. Safety managers should consider the global exposition to WBV throughout their working life, and this research provides an easy tool to accomplish it.     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

半岛型城市PM2.5多情景数值模拟研究

烟台是中国最东部半岛型城市之一,研究应用WRF-CMAQ空气质量模拟系统和排放清单技术,建立以PM2.5质量改善为核心的一次污染物质减排情景和PM2.5浓度下降之间的定量对应关系.分析结果表明,若烟台2020年实现空气质量达标,SO2、NOx、一次PM2.5分别需消减30%、30%和40%以上;一次PM2.5减排控制对PM2.5浓度下降的贡献,是SO2和NOx等常规污染物减排控制效益的8倍左右;如果仅依靠消减SO2和NOx等常规污染物,无法实现PM2.5浓度的大幅度下降.     

河北省PM2.5污染变化特征及暴露人群健康效应评估研究

PM2.5污染是影响中国城市居民健康和形成雾霾天气的重要原因之一,也是河北省健康发展的一个制约因素.采用环境污染流行病研究为基础的暴露-反应关系估算了2014年和2015年全省因PM2.5污染的居民早逝和罹患相关疾病住院的人数,并利用国家和河北省卫生统计数据,估算出人均人力资源价值和人均住院成本,计算出总经济损失.结果表明,河北省各市的PM2.5年均浓度呈下降趋势,因此,继续坚持有效的大气污染控制和应急健康防护措施,仍然是今后环保工作的重中之重.     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.