Treatment of landfill leachate by irrigation of willow coppice - Plant response and treatment efficiency

Landfill leachates usually need to be treated before discharged, and using soil-plant systems for this has gained substantial interest in Sweden and in the UK. A three-year field study was conducted in central Sweden to quantify plant response, treatment efficiency and impact on groundwater quality of landfill leachate irrigation of short-rotation willow coppice (Salix). Two willow varieties were tested and four irrigation regimes in sixteen 400-m² plots. The willow plants did not react negatively, despite very high annual loads of nitrogen (≤2160 kg N/ha), chloride (≤8600 kg Cl/ha) and other elements. Mean annual growth was 1.5, 9.8 and 12.6 tonnes DM/ha during years 1-3. For one of two willow varieties tested, relative leaf length accurately predicted growth rate. Irrigation resulted in elevated groundwater concentrations of all elements applied. Treatment efficiency varied considerably for different elements, but was adequate when moderate loads were applied.     

Azinphos Methyl Residues in Shallow Groundwater from the Fruit Production Region of Northern Patagonia,Argentina

Groundwater samples were collected from monitoring wells along an area of intensive fruit production. Different types of correlations were investigated between soil physicochemical characteristics, depths and agricultural practices with pesticide detection frequency. In the three analyzed periods azinphos methyl, S-(3,4-diydro-4-oxobenzo[d]-[1,2,3]-triazin-3-ylmethyl)-O,O-dimethyl phosphorodithioate, showed a definite seasonal behavior related to the application pattern, increasing its concentration in the aquifer from October to November-December and then decreasing towards March. Samples obtained during the non-spraying season showed that azinphos methyl residues were lower than detection limit (LOD).

An inverse correlation was observed between azinphos methyl concentration and the time elapsed since the last pesticide application. Seasonal events such as rain and irrigation influence the chemical concentration in the well, while no correlation was obtained between soil characteristics and azinphos methyl concentration. The soil attenuation capacity was not enough to prevent the presence of azinphos methyl in the aquifer during the application season.     

DETERMINATION OF DDT AND ITS METABOLITES IN CATTLE DIP SOIL AVAILABLE IN AQUEOUS PHASE AFTER REMEDIATION

Soil taken from a former cattle tick dip site in NSW Australia, was remediated with a chemical leaching technology. The pre- and post-remediated soil (20g) was dispersed in water (100mL) and subjected to passive diffusion using polymeric membranes. The remediation reduced tDDT from 1174.3μg/g to 102.9μg/g (ash weight basis), which was further reduced to 43.2μg/g with composting. The membranes accumulated 41.3μg tDDT/g from the dip soil, 49.2μg tDDT/g from the chemically leached soil and 3.1μg tDDT/g from the leached composted soil. The chemical leaching removed over 90% of the tDDT, but released soil bound DDT, which was converted to DDE, while 2.99μg/g was accumulated by the membranes from dip soil, 37.52μg/g was accumulated from remediated soil. Composting, however, almost eliminated the availability for passive diffusion by the membranes from 50 – 60μg/g in remediated soil to 3–3.5μg/g in composted soil. Variability studies of the membranes using eight replicates demonstrated that the accumulation by the membranes was reproducible with an average relative error of 20.3% for p,p'-DDT in soil type two, whilst the lowest average relative error for p,p'-DDE was 4.3%, suggesting that triplicate analyses will achieve acceptable accuracy.     

Carbaryl, 2,4-D,and Triclopyr Adsorption in Thatch-Soil Ecosystems

Thatch development in intensively managed turf sites may cause environmental concerns for greater sorption or leaching of applied chemicals in terrestrial ecosystems. To determine the adsorption potential of Carbaryl (1-Napthyl N-methylcarbamate), 2,4-D (2,4-dichloro-phenoxyacetic acid), and Triclopyr (3,5,6-trichloro-2-pyridinyloxyacetic acid) in turf ecosystems, composite thatch and underlying soil samples from three- and six-year-old stands of cool-season Southshore creeping bentgrass (Agrostis palustris Huds.) and warm-season Meyer zoysiagrass (Zoysia japonica Steud.) were collected. The samples were processed and analyzed for total organic carbon (C_Org); extractable (C_Ext), humic (C_HA) and fulvic acid (C_FA); anthrone reactive nonhumic carbon (ARC) fractions; and C_HA and C_FA associated iron (Fe) contents. Pesticide adsorption capacity (K _f ) and intensity (1/n), organic carbon partition coefficient (K _OC ) and Gibbs free energy change (Δ G) were calculated for thatch materials and the underlying soils using a modified batch/flow technique. Both bentgrass (BT) and zoysiagrass thatch (ZT) contained a greater concentration of C_Ext, C_FA, C_HA, and ARC than the respective soils (BS and ZS). The C_Ext, C_FA, C_HA, and ARC concentration was higher in BT compared with ZT. The BT contained a greater concentration of bound Fe in both C_FA and C_HA fractions than in BS, whereas ZT had more bound Fe in C_HA fraction than in ZS. On average, the BT had a greater concentration of bound Fe in C_Ext, C_FA, and C_HA fractions than in the ZT. Among the pesticides, Carbaryl had higher K _f and 1/n values than 2,4-D and Triclopyr for both thatch and soil. Although the K _OC and Δ G values of Carbaryl were higher in both BT and ZT than in the underlying soils, the K _OC and Δ G values of 2,4-D were significantly higher in BS and ZS than in the overlying thatch materials. The 2,4-D and Triclopyr had higher leaching indices (LI) than Carbaryl for both BT and ZT materials than the respective soils. The Carbaryl, however, had a higher LI for soils than for thatch materials. Averaged across thatch materials and soils, C_Org accounted for 96, 85, and 84% variations in Carbaryl, 2,4-D, and Triclopyr adsorption, respectively. Among the C_Org fractions, lignin followed by C_FA and C_HA accounted for greater adsorption of pesticides, especially Carbaryl. The concentration of C_HA and C_FA bound Fe did not correlate with K _f and 1/n values of pesticides.     

Ecotoxicity and fungal deterioration of recycled polypropylene/wood composites: Effect of wood content and coupling

Recycled polypropylene (rPP) was recovered from an industrial shredder and composites were prepared with a relatively wide range of wood content and with two coupling agents, a maleated PP (MAPP) and a maleated ethylene-propylene-diene elastomer (MAEPDM). The mechanical properties of the composites showed that the coupling agents change structure only slightly, but interfacial adhesion quite drastically. The durability of the materials was determined by exposing them to a range of fungi and, ecotoxicity was studied on the aquatic organism Vibrio fischeri. The composites generally exhibit low acute toxicity, with values below the levels considered to have direct ecotoxic effect on aquatic ecosystems (<2 toxic units). Their toxicity to V. fischeri depended on the presence of the coupling agents with larger E₅₀ values in 24-h aqueous extracts from composites containing MAPP or MAEPDM in comparison to composites without any coupling agent. Evaluation of resistance against fungal colonization and deterioration proved that wood facilitates fungal colonization. Fungi caused slight mass loss (below 3%) but it was not correlated with substantial deterioration in material properties. MAPP seems to be beneficial in the retention of mechanical properties during fungal attack. rPP/wood composites can be considered non-ecotoxic and quite durable, but the influence of wood content on resistance to fungal attack must be taken into account for materials intended for applications requiring long-term outdoor exposure.     

The effect of environmental conditions on the stability of heavy metal-filter material complex as assessed by the leaching of adsorbed metal ions

In this study the influence of environmental conditions, most likely prevailing in filter beds used for intermittently discharged pollutant streams such as landfill leachate and storm water, on the stability of the heavy metal-filter complex was investigated for 2 filter materials; non-treated and urea treated pine bark, using leaching experiments. The metal-filter complex stability was higher for urea treated than for non-treated pine bark and dependent on the metal adsorbed. The type of environmental condition applied was of less importance for the extent of leaching.     

A sulfur removal and disposal process through H2S adsorption and regeneration: Ammonia leaching regeneration

An iron oxide solid sponge H₂S adsorbent works by reacting H₂S and turning ferric oxide into ferric sulfide. The ferric sulfide will be converted back into ferric oxide and elemental sulfur when contacting oxygen or air. This study investigates the leaching of elemental sulfur from the solid sponge using anhydrous liquid ammonia as solvent. The leaching treatment expectedly results in effective regeneration of the adsorbent, which is able to lead to a sulfur removal and recovery process suitable for handling the small and mid-sized sulfur production cases, i.e., those less than 10 ton/day sulfur. The leaching does not significantly impair the physical properties, including the adsorbent pellet strength. The adsorption–regeneration (or leaching) cycle could be repeated at least three times. The cumulative sulfur loading can achieve as high as 50% (w/w), three times greater than that in the one-time use. The wash-off in leaching and the spent adsorbent can be made into slurry that is to be injected into underground formations such as depleted oil wells. It is anticipated that this underground injection is safer and more efficient than acid gas injection.     

Study of the chemistry of an acid soil column and of the corresponding leachates after the addition of an anaerobic municipal sludge

A column leaching study was carried out over a period of 77 days to determine the changes in the chemistry of an acid soil and of the corresponding leachates after the addition of an anaerobic sludge (equivalent to 69 Mg DW ha⁻¹). By the end of the experiment, the addition of the sludge to the soil had induced an increase in soil pH (from pH 3.6–4.0 to pH 4.1–4.8), in spite of the pronounced decrease in pH detected in the leachates by day 18 of the experiment. The decrease in pH (down to pH 3.3) occurred at the same time as leachate SO₄ and Fe peaked. Once the acidification attributed to sulphide oxidation ceased, the “liming effect” of the sludge became evident and counteracted further proton production – such as that associated with oxidation of NH₄ – at least for the duration of the study. Concentrations of Zn, Cd, Ni, and to a lesser extent, Pb in leachates displayed pulses at the beginning of the experiment (first 12 days), whereas the concentration of Cu followed a more irregular pattern; the concentrations of these metals never surpassed the European threshold values for drinking water. In contrast, concentrations of NO₃, Mn, and Cr in leachates had increased by the end of the experiment – in parallel with an increase in dissolved organic C (DOC) – and surpassed the European threshold for drinking water. Mineralisation of native soil organic C (SOC) was enhanced by the addition of this N-rich residue, and the organic C mass balance at the end of the experiment was negative. Nitrogen mass balance, although positive, exhibited a loss of 77% of the N added to the system. The results obtained indicate that application of this sewage sludge to a soil with a pH < 5, at the loading rate used here, and without liming (i.e., non fulfilment of the requirements of the present European Directive) may pose a risk in terms of groundwater contamination.     

Leaching and degradation of 21 pesticides in a full-scale model biobed

Filling and cleaning of pesticide sprayers presents a potential risk of pollution of soil and water. Three different solutions for handling sprayers have been suggested: Filling and cleaning in the field, filling and cleaning on hard surfaces with collection of the waste water, and filling and cleaning on a biobed, which is an excavation lined with clay and filled with a mixture of chopped straw, sphagnum and soil with turf on top, and with increased sorption capacity and microbial activity for degradation of the pesticides. In the present study the degradation and leaching of 21 pesticides (5 g of each) was followed in an established full-scale model biobed. Percolate was collected and analysed for pesticide residues, and the biobed material was sampled at three different depths and analysed by liquid chromatography double mass spectrometry (LC-MSMS). During the total study period of 563 days, no traces of 10 out of 21 applied pesticides were detected in the percolate (detection limits between 0.02 and 0.9 μg l⁻¹) and three pesticides were only detected once and at concentrations below 2 μg l⁻¹. During the first 198 days before second application, 14% of the applied herbicide bentazone was detected in the leachate with maximum and mean concentrations of 445 and 172 μg l⁻¹, respectively. About 2% of the initial mecoprop and fluazifop dose was detected in the percolate, with mean concentrations of 23 μg l⁻¹, while MCPA and dimethoate had mean concentrations of 3.5 and 4.7 μg l⁻¹, respectively. Leachate concentrations for the remaining pesticides were generally below the detection limit (0.02–0.9 μg l⁻¹, below 1% of applied). Sorption studies of five pesticides showed that compounds with a low K_d value appeared in the leachate. After 169 days, all pesticides in the biobed profile were degraded to a level below 50% of the calculated initial dose. Pesticides with K_oc values above 100 were primarily found in the uppermost 10 cm and degraded slowest due to the low bioavailability. The 11 most degradable pesticides were all degraded such that less than 3% remained in the biobed after 169 days.

Following second pesticide application of the biobed, leachate was sampled 215 and 365 days after the treatment. This showed the same pesticides to be leached out and at concentrations comparable to those of the first treatment. The same pesticides as after the first treatment were retained in the biobed.     

The use of clays to sequestrate organic pollutants. Leaching experiments

Leaching experiments are performed from clay-pollutant systems in order to evaluate the capability of clays to sequestrate organic pollutants from wastewaters. Reference kaolinite KGa-1b, montmorrillonite SWy-2 and reference soil BCR^®-700 are the sorbent materials. 2,4,6-trichloroaniline (2,4,6-TCA) and 4-chlorophenol (4-CP) are the typical pollutants, sorbed at amounts of 10.0 mg g⁻¹ and 5.8 mg g⁻¹ on SWy-2 and 7.3 mg g⁻¹ and 2.2 mg g⁻¹ on KGa-1b, respectively.The leaching agents are ultrapure water and model solutions of acid rain and surface waters that simulate meteoric leaching. 1.0 mM HNO₃, 1.0 mM H₂SO₄ solutions and a methanol/water 50/50 (v/v) mixture simulate leaching agents of industrial source.The results are compared and the preferential capability of the clays to sequestrate the more lipophilic 2,4,6-TCA is evidenced.The bond interactions are discussed and explained through preferential adsorption reactions. For montmorrillonite also a simultaneous intercalation in the phyllosilicate interlayer is proposed.