Sequential Extraction Versus Comprehensive Characterization of Heavy Metal Species in Brownfield Soils

The applicability of sequential extraction as a means to determine species of heavy-metals was examined by a study on soil samples from two Superfund sites: the National Lead Company site in Pedricktown, NJ, and the Roebling Steel, Inc., site in Florence, NJ. Data from a standard sequential extraction procedure were compared to those from a comprehensive study that combined optical- and scanning-electron microscopy, X-ray diffraction, and chemical analyses. The study shows that larger particles of contaminants, encapsulated contaminants, and/or man-made materials such as slags, coke, metals, and plastics are subject to incasement, non-selectivity, and redistribution in the sequential extraction process. The results indicate that standard sequential extraction procedures that were developed for characterizing species of contaminants in river sediments may be unsuitable for stand-alone determinative evaluations of contaminant species in industrial-site materials. However, if employed as part of a comprehensive, site-specific characterization study, sequential extraction could be a very useful tool.     

Economic assessment of the negative impacts of ozone on crop yields and forest production. A case study of the estate Ostads Säteri in southwestern Sweden

Ground level ozone concentrations, in combination with the prevailing climate, at the estate Ostads S?teri in southwestern Sweden were estimated to reduce the yield of wheat and potato ranging between 5% and 10%. Occasionally, in years with the highest ozone concentrations and/or climatic conditions favoring high rates of ozone uptake to the leaves, yield loss levels above 10% may occur. Based on simple extrapolation, these ozone-induced reductions of crop yields at Ostads S?teri represent a potential total annual yield loss in Sweden in the range of 24.5 million Euro for wheat and 7.3 million Euro for potato, respectively. A simulation of forest growth at Ostad S?teri predicted that prevailing mean ozone exposure during 1993-2003 had the potential to reduce forest growth by 2.2% and the economic return of forest production by 2.6%. Using this value for extrapolation to the national level, the potential annual economic loss for Sweden due to negative impacts of ozone on forest production would be in the range of 56 million Euro (2004 prices).     

Possibilities for improving nitrogen use from organic materials in agricultural cropping systems

Nitrogen release from organic nutrient sources in soil is influenced by a range of factors such as soil temperature and moisture, and chemical composition of the organic material. Chemical composition can, to a certain degree, be controlled to increase the synchronization of nitrogen (N) release with plant N demand, whereas climatic factors cannot be controlled and so must be taken into account when planning management measures. In this paper, we discuss different ways to affect N release through manipulation of the chemical composition of fresh or pretreated plant materials and animal manures, timing of incorporation, and intentional distribution during application. We conclude by giving an overview of off-farm options that may need to be implemented to achieve improved use of N, especially in agricultural systems with surplus N.     

Effects of Sorbent Injection on Participate Properties: Part I. Low-Temperature Sorbent Injection

Abstract

This article is the first of a two-part series dealing with the effects of sorbent injection processes on particulate properties. Part I reviews the effects on particulate properties of low-temperature sorbent injection processes (those processes that treat flue gas at temperatures near 300 °F). Part II reviews the effects on particulate properties of high-temperature sorbent injection processes (those processes that involve sorbent injection into the combustion or economizer sections of a boiler). In this article, we review what is currently known about the effects of the low-temperature sorbent injection processes on electrical resistivity, particulate mass loading, particulate size distribution, particulate morphology and cohesivity.

Mixtures of ash and sorbent produced by low-temperature sorbent injection processes are typically less cohesive than most types of fly ash. At temperatures within 30 °F of the water dew point, the combination of low cohesivity and low electrical resistivity of the ash and sorbent mixtures can cause electrical reentrainment in electrostatic precipitators. Deliquescent additives such as calcium chloride cause the water to be retained on the particle surface, thereby increasing cohesivity.

Sorbent injection has been reported to increase the particulate mass loading by a factor of 1.8 to 10, depending upon the reagent ratio and the coal sulfur content. Conventional and in-duct spray drying processes tend to shift the particle size distribution toward larger particles, while dry injection processes tend to shift the particle size distribution toward smaller particles.     

Dense resistivity and induced polarization profiling for a landfill restoration project at H?rl?v, Southern Sweden.

A resistivity and time-domain induced polarization (IP) survey was conducted at a landfill site under restoration at H?rl?v in Southern Sweden. The covering of the landfill had begun some years ago, without keeping precise records of the work done, as is usual in such procedures. The survey was conducted in two steps, on two adjacent areas. First, a number of geoelectrical sections were made on a partly covered area that had been investigated earlier by auger drilling, in order to assist restoration. Then, a second area that should have received its final cover was imaged, and some defects in the cover could be detected and repaired. The resistivity and time-domain IP results were consistent with the results of the geotechnical drillings, and they enabled quasi-continuous mapping along the profiles. Three-dimensional visualization showed the overall consistency of the two-dimensional lines, and helped to generate a global view of the site. In spite of some ambiguities, cover and waste could be distinguished in most cases. In particular, fine-grained cover materials could be clearly distinguished from other cover materials.     

Environmental filtering and land-use history drive patterns in biomass accumulation in a mediterranean-type landscape

Aboveground biomass (AGB) reflects multiple and often undetermined ecological and land-use processes, yet detailed landscape-level studies of AGB are uncommon due to the difficulty in making consistent measurements at ecologically relevant scales. Working in a protected mediterranean-type landscape (Jasper Ridge Biological Preserve, California, USA), we combined field measurements with remotely sensed data from the Carnegie Airborne Observatory's light detection and ranging (lidar) system to create a detailed AGB map. We then developed a predictive model using a maximum of 56 explanatory variables derived from geologic and historic-ownership maps, a digital elevation model, and geographic coordinates to evaluate possible controls over currently observed AGB patterns. We tested both ordinary least-squares regression (OLS) and autoregressive approaches. OLS explained 44% of the variation in AGB, and simultaneous autoregression with a 100-m neighborhood improved the fit to an r2 = 0.72, while reducing the number of significant predictor variables from 27 variables in the OLS model to 11 variables in the autoregressive model. We also compared the results from these approaches to a more typical field-derived data set; we randomly sampled 5% of the data 1000 times and used the same OLS approach each time. Environmental filters including incident solar radiation, substrate type, and topographic position were significant predictors of AGB in all models. Past ownership was a minor but significant predictor, despite the long history of conservation at the site. The weak predictive power of these environmental variables, and the significant improvement when spatial autocorrelation was incorporated, highlight the importance of land-use history, disturbance regime, and population dynamics as controllers of AGB.     

On the road to ‘research municipalities’: analysing transdisciplinarity in municipal ecosystem services and adaptation planning

Transdisciplinary research and collaboration is widely acknowledged as a critical success factor for solution-oriented approaches that can tackle complex sustainability challenges, such as biodiversity loss, pollution, and climate-related hazards. In this context, city governments’ engagement in transdisciplinarity is generally seen as a key condition for societal transformation towards sustainability. However, empirical evidence is rare. This paper presents a self-assessment of a joint research project on ecosystem services and climate adaptation planning (ECOSIMP) undertaken by four universities and seven Swedish municipalities. We apply a set of design principles and guiding questions for transdisciplinary sustainability projects and, on this basis, identify key aspects for supporting university–municipality collaboration. We show that: (1) selecting the number and type of project stakeholders requires more explicit consideration of the purpose of societal actors’ participation; (2) concrete, interim benefits for participating practitioners and organisations need to be continuously discussed; (3) promoting the ‘inter’, i.e., interdisciplinary and inter-city learning, can support transdisciplinarity and, ultimately, urban sustainability and long-term change. In this context, we found that design principles for transdisciplinarity have the potential to (4) mitigate project shortcomings, even when transdisciplinarity is not an explicit aim, and (5) address differences and allow new voices to be heard. We propose additional guiding questions to address shortcomings and inspire reflexivity in transdisciplinary projects.     

Treatment of landfill leachate by irrigation of willow coppice - Plant response and treatment efficiency

Landfill leachates usually need to be treated before discharged, and using soil-plant systems for this has gained substantial interest in Sweden and in the UK. A three-year field study was conducted in central Sweden to quantify plant response, treatment efficiency and impact on groundwater quality of landfill leachate irrigation of short-rotation willow coppice (Salix). Two willow varieties were tested and four irrigation regimes in sixteen 400-m² plots. The willow plants did not react negatively, despite very high annual loads of nitrogen (≤2160 kg N/ha), chloride (≤8600 kg Cl/ha) and other elements. Mean annual growth was 1.5, 9.8 and 12.6 tonnes DM/ha during years 1-3. For one of two willow varieties tested, relative leaf length accurately predicted growth rate. Irrigation resulted in elevated groundwater concentrations of all elements applied. Treatment efficiency varied considerably for different elements, but was adequate when moderate loads were applied.     

提高农业种植体系有机物质中氮利用的可能性研究

土壤有机养分源中的氮释放受许多因子的影响,如土壤温度和水分、有机物质的化学组成.在某种程度上,控制有机物质的化学组成可以增加氮释放和植物需求的同步性,而气候因子是不能控制的,因此在计划管理措施时要考虑这些因素.本文通过调节新鲜或预处理过的植物材料和牲畜粪肥的化学组成、施用时间以及有意分配,来探讨影响氮释放的不同途径.最后阐述提高氮利用率需要实施的农场外的(off-farm)的选择,尤其是对氮过剩的农业体系.     

Environmental Effects of In Situ Burning of Oil Spills in Inland and Upland Habitats

In situ burning of inland and upland habitats is an alternative oil spill cleanup technique that, when used appropriately, may be more environmentally acceptable than intrusive manual, mechanical, and chemical treatments. There have been few published reports documenting the environmental effects of in situ burning in inland and upland habitats. Thus, this study, sponsored by the American Petroleum Institute, used two approaches to increase the knowledge base and improve the appropriate use of in situ burning: (1) detailed review of published and unpublished in situ burn case histories for inland and upland spills; and (2) summaries of fire effects and other information from the literature on fire ecology and prescribed burning. Thirty-one case histories were summarized to identify the state of the practice concerning the reasons for burning, favorable conditions for burning, and evaluations of burn effects. The fire ecology and effects summaries included information from the extensive knowledge base surrounding wildfire and prescribed burning (without oil) as a natural resource management tool, as well as fire tolerance and burning considerations for dominant vegetation types of the United States. Results from these two approaches should improve the application of in situ burning for inland and upland spills.