电感耦合等离子体质谱法测定水中钴的研究

采用电感耦合等离子体质谱仪测定水中的钴,在0μg／L～300μg／L范围内线性良好,相关系数均达到0．9999。该法对钴标准样品测定的结果在保证值范围。对三份不同浓度水样分别进行测定,其结果的RSD为0．2％～1．2％,空白水样的加标回收率在99％～107％之间。通过对水样的分析,符合标准要求,ICP－MS质谱仪具有灵敏度高,检出限低,取样量少,线性范围宽等特点,能快速测出水中的微量重金属元素含量。     

铬酸钡分光光度法和间接原子吸收法测定水中硫酸盐的比较

目的比较铬酸钡分光光度法和间接原子吸收法测定水中硫酸盐的异同。方法比较两种方法的标准曲线和回收率,并对12份地下水和地表水（硫酸盐浓度大于10.0 mg.L-1）分别用两种方法分析。同时进行两种方法精密度和准确度比较。结果两种方法的相关系数均大于0.999,回收率均满足分析要求。进行12份水样测定结果的配对t检验,t=0.13,P﹥0.05。对于10.0 mg.L-1的合成水样,铬酸钡法分光光度法测定相对误差为9.0%,而间接原子吸收法测定相对误差为0.4%。结论铬酸钡分光光度法在测定低浓度硫酸盐时,准确度和灵敏度较间接原子吸收法低,而大于10 mg/L时,两种方法都能得到较好的准确度和灵敏度。     

氢化物发生-原子荧光光谱法测定废水中砷探讨

砷是对人体有害的元素,当人体每天的摄入量超过100ug或更高时,对人体就会产生严重的危害,而有些工业废水中合有一定量的砷元素,如果这些工业废水不经处理排放到水中会我们的身体造成很大程度的伤害,所以我对某工厂的工业废水进行检测,检测其排放废水中所含有砷元素的多少。火焰原子荧光和石墨炉原子荧光的检测能力无法满足测定的要求,...     

掺钴水钠锰矿对铅的吸附及对砷的氧化

为了研究过渡金属离子掺杂对锰氧化物作为环境友好材料物理化学性质的影响,在浓盐酸还原高锰酸钾制备水钠锰矿过程中添加氯化钴,在常压回流条件下一步合成了三维纳米微球状水钠锰矿,考察了其铅吸附和砷氧化能力.应用粉晶X射线衍射、化学分析、N2物理吸附、场发射扫描电镜（FE-SEM）、X射线光电子能谱（XPS）等手段表征产物晶体结...     

液膜富集火焰原子吸收法测定水中痕量镉

研究表面活性剂、流动载体,内相解吸剂、外相酸度、液体石蜡和油内比等因素对分离富集镉的影响,且考察其膜的溶胀程度和破乳难易。确定了Ｓｐａｎ８０－Ｐ２０４－煤油－ＨＣｌ液膜体系的最佳组成及富集条件。分４批处理料液,富集倍数达８０以上．回收率在９７％以上,且选择性好。与火焰ＡＡＳ法组合可测定ｐｐｂ级的镉。本法灵敏度高准确度好。     

石墨探针收集/石墨探针炉原子吸收法直接测定APM中痕量铅

研究一种直接收集并测定大气微粒物质中痕量有害元素铅的新方法,石墨探针直接收集ＡＰＭ后,用石墨探针炉原子吸收法直接测定收集在探针上的ＡＰＭ中痕量铅。方法特征量为４４．００ｐｇ,检出限为４８．３６ｐｇ,,相对标准偏差为３．２２％,铅学度与峰面积吸光度在０－２５０μｇ／Ｌ范围内呈线性关系,测定标准参比材料,其回收率为９４．４２％＿９９．１４％,并成功地测定了大气微粒物质中痕量铅的含量。     

型煤燃烧固硫中的温度效应

以氧化钙作为固硫剂的型煤中适当加入Ｆｅ,Ｓｉ添加剂组分,燃烧生成新的固硫体系后进行了２种不同温度条件下的进样实验。１．型煤样品分成６份,进行逐渐升温实验,分别加热到１１７０℃－１２２０℃,温度间隔１０℃,恒温１／４ｈ,２．型煤样品分成７份,进行先升温后进样实验,将加热炉分别升温至要求温度１０００℃－１２２０℃＋后进样,温度间隔５０℃,恒温１／２ｈ,实验表明：在Ｆｅ,Ｓｉ体系的型煤燃烧过程中,当进样     

Measurements of selected PCBs in open urban ambient air of Madrid (Spain)

The focus of this study was to characterize the concentration levels of selected PCBs and compare them to compiled data in order to contribute to the international database. The sampling site is located in the outskirts of Madrid and can be considered an open urban area. 32 samples of air were taken from February 1998 to June 1998 by using a high volume air sampler. Glass fiber filters and polyurethane foam (PUF) were used to collect the paniculate and gas phase material, respectively. PUF plugs were Soxhlet extracted and filters were ultrasonically extracted by using pesticide-grade hexane and dichloromethane, respectively. The cleanup procedure was carried out on a florisil column with hexane and hexane/dichloromethane as elution solvents. GC/MS in a selected ion monitoring mode was used for quantification and 29 selected PCBs congeners were analyzed.     

固相萃取-气相色谱/质谱法测定水中多环芳烃

建立了固相萃取-气相色谱／质谱联用测定水中多环芳烃(PAHs)的分析方法．优化了固相萃取条件。结果表明,固相萃取效率高、萃取时间短,采用MS的选择离子检测方式对实际水样中PAHs进行定性定量分析,平均回收率在80．4％～115％之间,相对标准偏差为7．03％～18．5％,方法的检出限在0．010～0．020μg／L之间。通过实际样品中PAHs的分析表明,该法快速,溶剂用量少,能满足痕量分析的要求。     

Discovery of emerging organic pollutants in the atmosphere through an omics approach

● We review the framework of discovering emerging pollutants through an omics approach. ● High-resolution MS can digitalize atmospheric samples to full-component data. ● Chemical features and databases can help to translate untargeted data to compounds. ● Biological effect-directed untargeted analyses consider both existence and toxicity. Ambient air pollution, containing numerous known and hitherto unknown compounds, is a major risk factor for public health. The discovery of harmful components is the prerequisite for pollution control; however, this raises a great challenge on recognizing previously unknown species. Here we systematically review the analytical techniques on air pollution in the framework of an omics approach, with a brief introduction on sample preparation and analysis, and in more detail, compounds prioritization and identification. Through high-resolution mass spectrometry (HRMS, typically coupled with chromatography), the complicated environmental matrix can be digitalized into “full-component” data. A key step to discover emerging compounds is the prioritization of compounds from massive data. Chemical fingerprints, suspect lists and biological effects are the most vital untargeted strategies for comprehensively screening critical and hazardous substances. Afterward, compressed data of compounds can be identified at various confidence levels according to exact mass and the derived molecular formula, MS libraries, and authentic standards. Such an omics approach on full-component data provides a paradigm for discovering emerging air pollutants; nonetheless, new technological advancements of instruments and databases are warranted for further tracking the environmental behaviors, hence to evaluate the health risk of key pollutants.