Effect of pyrolysis and oxidation characteristics on lauric acid and stearic acid dust explosion hazards

The effect of pyrolysis and oxidation characteristics on the explosion sensitivity and severity parameters, including the minimum ignition energy MIE, minimum ignition temperature MIT, minimum explosion concentration MEC, maximum explosion pressure P_max, maximum rate of pressure rise (dP/dt)_max and deflagration index K_st, of lauric acid and stearic acid dust clouds was experimentally investigated. A synchronous thermal analyser was used to test the particle thermal characteristics. The functional test apparatuses including the 1.2 L Hartmann-tube apparatus, modified Godbert-Greenwald furnace, and 20 L explosion apparatus were used to test the explosion parameters. The results indicated that the rapid and slow weight loss processes of lauric acid dust followed a one-dimensional diffusion model (D1 model) and a 1.5 order chemical reaction model (F1.5 model), respectively. In addition, the rapid and slow weight loss processes of stearic acid followed a 1.5 order chemical reaction model (F1.5 model) and a three-dimensional diffusion model (D3 model), respectively, and the corresponding average apparent activation energy E and pre-exponential factor A were larger than those of lauric acid. The stearic acid dust explosion had higher values of MIE and MIT, which were mainly dependent on the higher pyrolysis and oxidation temperatures and the larger apparent activation energy E determining the slower rate of chemical bond breakage during pyrolysis and oxidation. In contrast, the lauric acid dust explosion had a higher MEC related to a smaller pre-exponential factor A with a lower amount of released reaction heat and a lower heat release rate during pyrolysis and oxidation. Additionally, due to the competition regime of the higher oxidation reaction heat release and greater consumption of oxygen during explosion, the explosion pressure P_m of the stearic acid dust was larger in low concentration ranges and decayed to an even smaller pressure than with lauric acid when the concentration exceeded 500 g/m³. The rate of explosion pressure rise (dP/dt)_m of the stearic acid dust was always larger in the experimental concentration range. The stearic acid dust explosion possessed a higher P_max, (dP/dt)_max and K_st mainly because of a larger pre-exponential factor A related to more active sites participating in the pyrolysis and oxidation reaction. Consequently, the active chemical reaction occurred more violently, and the temperature and overpressure rose faster, indicating a higher explosion hazard class for stearic acid dust.     

Variability of pesticide residues in cauliflower units collected from a field trial and market places in Greece

To estimate the variability of pesticide residue levels present in cauliflower units, a total of 142 samples were collected from a field trial of a cooperative farmer, and 120 samples were collected from different market places in Thessaloniki, Greece. The collected samples were extracted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction technique, and the residues were determined by liquid chromatography–tandem mass spectrometry. The developed method was validated by evaluating the accuracy, precision, linearity, limit of detection (LOD), and limit of quantification (LOQ). The average recoveries for all the analytes, derived from the data of control samples fortified at 0.01, 0.05, 0.1, and 0.2 mg/kg, ranged from 74 to 110% with a relative standard deviation of ≤8%. The correlation coefficient (R²) was ≥0.997 for all the analytes using matrix-matched calibration standards. The LOD values ranged from 0.001 to 0.003 mg/kg, and the LOQ was determined at 0.01 mg/kg for all the sought analytes. The matrix effect was found to be at a considerable level, especially for cypermethrin and deltamethrin, amounting to +90% and +145%, respectively. For the field samples, the unit-to-unit variability factors (VFs) calculated for cypermethrin and deltamethrin were 2.38 and 2.32, respectively, while the average VF for the market basket samples was 5.11. In the market basket samples, residues of cypermethrin, deltamethrin, chlorpyrifos, and indoxacarb were found at levels ≥LOQ and their respective VFs were 7.12, 5.67, 5.28, and 2.40.     

中国经济发展方式的转变动力及其作用途径

以全要素生产率增长动力作为经济发展方式的转变动力,本文采用1989-2013年4组省际面板数据经由可行广义最小二乘法实证估计了10个动力因素对全要素生产率增长率的贡献水平与作用途径。研究发现:技术创新水平、市场化水平、人力资本存量水平、异质性企业集聚水平和对外开放度的综合指数对中国全要素生产率增长率的回归估计系数分别为0.575 7,0.212 5,0.136 8,0.064 4和0.018,表明技术创新、市场化改革、人力资本积累、异质性企业集聚和对外开放是促进中国经济发展方式转变的直接动力因素。进一步的研究结果显示:技术创新和异质性企业集聚通过提高前沿技术进步率和生产效率变化率以及规模报酬收益率途径,市场化改革通过提高前沿技术进步率途径,人力资本积累与对外开放通过提高前沿技术进步率和规模报酬收益率途径,促进了中国全要素生产率增长。虽然产业结构变迁、城市化、基础设施建设、区域经济政策实施和金融发展对中国全要素生产率的增长表现为负向或拖累作用,但是,产业结构变迁与城市化能够提高前沿技术进步率,基础设施建设和区域经济政策能够提高规模报酬收益率,金融发展能够提高生产效率增长率和规模报酬收益率,这5项动力因素对促进中国全要素生产率增长的正向贡献有待提高。依据上述研究结论,本文提出尽快攻克制约生产率增长的核心技术,统筹考虑产业结构升级、城市化、基础设施建设和区域经济政策实施以及加快金融领域改革等政策建议,以期加快我国经济发展方式转变进程。     

淮南市降水化学组成特征与来源分析

2013—2014年,逐次采集淮南城市大气降水样品,对其离子化学组分进行分析测试,并利用酸度分析、中和因子和富集系数等方法对其酸碱物质平衡和离子来源进行了分析。化学组分分析结果表明,淮南城市降水pH为6.23~7.03,雨量加权平均值为6.68,整体上降水没有呈现酸化,大部分酸性物质能被碱性物质中和。主要阴离子为SO_4~(2-)、NO_3~-,雨量加权平均值分别为147.02、62.16μeq/L,两者分别占阴离子总浓度的60.3%、25.3%;主要阳离子为Ca~(2+)、NH_4~+,雨量加权平均值分别为126.42、96.43μeq/L,分别占阳离子总浓度的44.9%、34.3%。利用富集系数法计算结果表明,SO_4~(2-)、NO_3~-主要来源于人为活动排放,Cl~-主要为海洋输入,而Ca~(2+)、Mg~(2+)、K~+则主要来自陆源输入和人为活动。     

中国雾霾空间分布特征及影响因素分析

近年来我国雾霾天气频发,以PM_(10)和PM_(2.5)为核心的大气污染物对人体健康和大气环境质量造成了严重威胁,已经成为当前不容忽视且亟需解决的重大民生问题和环境问题,深入分析雾霾污染的形成原因和影响因素对于科学制定切实有效的治霾政策具有重要的现实意义。本文基于我国288个地级以上城市2015年1月—2017年2月的月均空气质量AQI数据,首先采用空间统计方法对雾霾污染空间分布的季节特征进行可视化描述,其次通过空间自相关指数对雾霾污染的空间集聚特征进行了实证检验,最后在此基础上建立空间计量模型对影响雾霾污染的社会经济因素进行了经验识别。结果表明:(1)我国雾霾污染的季节性特征明显,夏季空气质量状况最好,春季和秋季次之,冬季污染最严重且波及范围广,其中河北南部、河南北部、山西南部和陕西关中地区是污染重灾区,季均空气质量均为中度污染以上。(2)雾霾污染存在显著的空间正相关特征,我国东部沿海地区表现为显著的低低集聚,华北平原及周边地区呈现显著的高高集聚特征。(3)空间回归结果显示,我国雾霾污染与经济增长的关系在一定程度上与EKC曲线假说相符,其中二产畸高的产业结构、民用汽车保有量的增多和省会城市均对雾霾污染有显著的正向促进作用,但人口密度和绿化水平对雾霾污染的影响并不显著。因此,治霾政策应坚持城市内部以促进产业结构转型升级、鼓励使用新能源汽车和共享单车、疏散省会城市的职能为主,城市外部应以区域联防联控为主,从而达到缓解和改善大气环境的目的。     

基于耗散理论的高新技术产业竞争力研究——以中部地区安徽省为例

高新技术产业带动结构调整和经济持续快速增长已成为全世界经济发展的大趋势和新潮流,是一个国家或地区核心竞争力的重要标志.基于耗散结构理论,创新性地构建了高新技术产业竞争力评价指标体系,通过对我国中部地区之间的比较分析,实证分析了安徽省高新技术产业发展的优势和劣势,并对其发展提出了对策建议.     

我国典型南方城市臭氧污染特征

分析了我国典型南方城市的臭氧污染特征,选取我国4个有代表性的南方重点城市武汉、宁波、中山和南宁的2013—2015年监测数据,使用EXCEL、ORIGIN和MATLAB等统计软件开展研究,结果表明:我国南方典型城市的臭氧质量浓度分布有明显时间变化特征,超标时间跨度大,部分南方城市与氮氧化物存在较明显负相关性,相关系数高于-0.6;受城市所在不同地理位置、气象因素、大气扩散条件及可能的不同本地排放污染源构成等因素影响,4个城市的近3年臭氧浓度月均值、超标情况和年内峰值均存在一定差异和分组相似性;与部分气象因素也表现出显著相关性。     

强“波特假说”存在产业异质性吗?——基于产业碳密集程度细分的视角

强"波特假说"认为严格而恰当的环境规制政策将使企业的生产效率呈现先降后升的趋势,为验证强"波特假说"及其产业异质性,首先建立产业碳密集指数,将工业部门36个细分行业划分为高碳密集产业、中碳密集产业和低碳密集产业;接着运用方向性距离函数测算2003—2014年细分行业的绿色全要素生产率,基于系统"GMM"估计方法验证三个细分行业的环境规制强度对绿色全要素生产率的影响。研究结果显示:第一,样本期间内,高碳密集产业的环境规制强度远远高于中低碳密集产业,这表明高碳密集产业一直是产业节能减排的重点对象,而碳排放情况较为严重的中碳密集产业则为"被遗忘的角落";第二,强"波特假说"在工业部门内存在产业异质性,高碳密集产业和中碳密集产业的环境规制强度与绿色全要素生产率呈"U"型关系,而在低碳密集产业中两者则呈倒"U"型关系;第三,相对于高碳密集产业,中碳密集产业因环境规制强度较容易跨越"U"型拐点而具有较大的减排空间,低碳密集产业在达到"U"型拐点之前,环境规制为其绿色全要素生产率提升的动力。本文研究结论蕴含如下的政策建议:根据产业的碳密集程度实施针对性的环境规制政策,持续加强中碳密集产业的环境规制力度,适度加强低碳密集产业的环境规制强度,高碳密集产业需根据不同阶段的经济水平设计具有针对性的环境规制政策,逐渐将三类产业的"遵循成本"效应转化为"创新补偿"效应,实现经济增长和环境保护的双赢。     

航空不安全事件人为因素分析R-S-TER模型的构建与应用研究

借鉴传统人为因素分析Reason模型和SHEL模型,结合TER模型的特点构建航空不安全事件人为因素分析的R-S-TER模型。分别采用Dijkstra算法和坐标轴方法应用R-S-TER模型对单个和多个航空不安全事件进行研究,找出各个不安全事件的主要事故链。运用C语言程序计算出了预防航空不安全事件的最优方案。应用R-S-TER模型可以有效地达到预防航空不安全人为因素的目的。     

山东省临沂市土壤有机氯农药滴滴涕残留量与空间分布特征

通过对临沂市全区表层土壤每36 km2进行样品收集,测试分析了DDTs、Org C、N等指标,主要研究了区域表层土壤DDTs的残留现状、组成和来源、影响因素、空间分布和环境质量特征.结果表明,调查区表层土壤中DDTs检出率为71.75%,平均含量为0.035μg·g-1;检出样品中p,p'-DDT和p,p'-DDE为主要残留物,平均残留分别为0.033μg·g-1和0.010μg·g-1,分别占检出样的60.99%和34.62%.DDTs降解率指示区域58%表层土壤为新近输入区,新近输入区在调查区中南部分布尤为明显;而p,p'-DDD/p,p'-DDE指示区域DDTs降解以氧化环境为主,o,p'-DDT/p,p'-DDT指示71.37%区域土壤DDTs输入可能与工业级DDTs有关.相关分析表明,影响土壤DDTs分布的外在因素包括土壤Org C、N、C和p H等指标,且DDTs中p,p'-DDT组分占比越高,影响越明显.DDTs的空间分布具明显点源特征,市县周围均出现明显浓集中心,中南部部分区域浓度明显较高.全区DDTs土壤环境质量污染程度较低,主要以一二类土壤为主,分别占78.95%和21.05%.