硅胶管吸附气相色谱法测定气体中的乙酸、丙酸

建立了用GC-FID同时测定空气中乙酸、丙酸的方法.乙酸、丙酸经硅胶管吸附后,用丙酮溶剂解吸,气相色谱分析.优化条件下,在20 ～2 000 mg/L范围内有良好的线性关系.方法检出限分别达到了1.0 mg/m3和0.5 mg/m3,相对标准偏差2.2％和1.9％,回收率在94％以上.     

离子色谱法测定丙烯酸丁酯生产废水中丙烯酸和对甲基苯磺酸

建立了用离子色谱法测定丙烯酸丁酯生产废水中丙烯酸和对甲基苯磺酸的新方法。采用IonPac AS11-HC阴离子色谱柱,淋洗液为30mmol/L的NaOH淋洗液,流速1ml/min,抑制电流75mA。丙烯酸根的检测下限为0.44mg/L(峰面积)、0.46mg/L(峰高),保留时间、峰高、峰面积的变异系数分别为0.03%、0.50%、0.50%,峰高、峰面积的线性回归系数R分别为0.9929、0.9954。对甲基苯磺酸根的检测下限为0.49mg/L(峰面积)、0.48mg/L(峰高),保留时间、峰高、峰面积的变异系数分别为0.02%、0.48%、0.47%,峰高、峰面积的线性回归系数R分别为0.9990、0.9998。常规无机阴离子对丙烯酸、对甲基苯磺酸的测定没有干扰。对实际废水样品进行分析,丙烯酸、对甲基苯磺酸的回收率分别为101.6%～104.4%、95.4%～96.8%。方法简便、灵敏、可靠。     

离子色谱法测废印刷电路板真空热解气相污染物中HBr、NO2和SO2

在淋洗液中加入H2O2和三乙醇胺配制成吸收液,通过离子色谱法同时测定废印刷电路板真空热解气相产物中HBr、NO_2和SO_2的含量,方法简单、快速、准确。当用50 m L吸收液、采样体积为30 L时,3种污染物的检出限分别为0.000 005 7、0.000 003 4、0.000 002 9 mg/L。该方法加标回收率为95.7%~104.8%,完全能满足废印刷电路板真空热解气相污染物中HBr、NO_2和SO_2的同时测定要求。利用该方法和行标方法同时测定环境空气中的HBr、NO_2和SO_2,再利用Excel分析工具对测定数据进行F检验和t检验,检验结果表明2种测定方法无显著差异。     

Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

气相色谱法测定苯酚生产废水中芳香族化合物

建立了用气相色谱法同时测定苯酚生产废水中异丙苯、α-甲基苯乙烯、α-甲基苯甲醇、2-苯基-2-丙醇、苯酚、苯乙酮、2-苯基丙醛等7种芳香族有毒有机污染物的定量分析方法。采用二氯甲烷对水样进行萃取后进行分析测定,气相色谱条件:DB-WAX型色谱柱,FID检测器,程序升温,进样量1μL。方法的检出限、精密度、回收率实验表明,该方法对苯酚生产废水中各污染物组分具有较好的分离效果,对7种物质的检测限均低于0.05 mg/L,5次测定的相对标准偏差小于5%,实际水样的加标回收率大于97%。     

顶空气相色谱法在测定水中三氯乙醛的应用

研究以DB-624交联石英毛细管柱分离,微电子捕获检测器-顶空气相色谱法测定水中三氯乙醛的应用,与以往的方法相比,准确可靠、省工省时省试剂,符合"绿色分析化学"的要求。最低检出限为0.2μg/L,标准偏差为0.028μg/L,相对标准偏差为6.0%,加标回收率为88.7%～109%。     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

Comparison of Three Extraction Methods for 17 β-Estradiol in Sand,Bentonite, and Organic-Rich Silt Loam

Extraction is an important procedure for samples that contain soil because other compounds in soil may affect analysis of estrogens. This study was conducted to evaluate three different extraction methods for 17β-estradiol in soil. Sand, bentonite, and organic-rich silt loam were spiked with 1 mg kg^{? 1} of 17β-estradiol as a model compound of estrogens. 17β-estradiol and its metabolites, estrone and estriol, were extracted using (i) a modified Bligh and Dyer extraction, (ii) a pressurized fluid extraction, and (iii) a diethyl ether extraction, and measured by liquid chromatography tandem mass spectrometry. There were significant differences in the extraction efficiency for 17β-estradiol among the extraction methods and the soils: the efficiencies ranged from 10% to 97%. Overall, the diethyl ether extraction method had the largest efficiency of 17β-estradiol with 45% and 57% for bentonite and silt loam, respectively. Transformation of 17β-estradiol to estrone and estriol in the different extraction methods was less than 3.6% during the extraction procedures. This study underlined the importance of sample preparation for estrogen analysis in soil samples.     

水中丙烯酰胺气相色谱测定方法研究

研究建立了大口径毛细管柱气相色谱法测定水中丙烯酰胺的方法。优化了水中丙烯酰胺的衍生化条件,用乙酸乙酯和正己烷混合溶剂萃取衍生产物,萃取后直接进行色谱分离分析,水中丙烯酰胺的最低检测浓度为0.05μg/L,回收率在94.5%～113%之间;进行6次平行精密度试验,相对标准偏差低于11.5%。研究建立的气相色谱法简便、快速、准确、重现性好,定量、定性准确可靠,适合水中丙烯酰胺的分析测定。     

Determination of antibiotics in sewage from hospitals, nursery and slaughter house, wastewater treatment plant and source water in Chongqing region of Three Gorge Reservoir in China

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18-100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H₂O (ERY-H₂O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.