Accurate sampling of PCDD/F in high temperature flue-gas using cooled sampling probes

In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone.     

卷烟膨胀烟丝生产线冷端CO_2泵装置的优化改进

为解决干冰膨胀烟丝生产线冷端液体工艺泵因机械密封长期超压和气缚现象造成损坏发生CO2泄漏而导致紧急停机抢修的问题,对干冰膨胀线冷端工艺罐系统进行了优化改进。在工艺泵吸口前管路引一根气相平衡管至工艺罐顶部,当泵吸口前管路有CO2液体时,输送管路内气化的CO2气体通过气相平衡管线释放回工艺罐内,不会进入工艺泵体内。应用结果表明,工艺泵内的憋压和气缚现象消失了,机械密封受到保护。改造前机械密封平均一个季度更换一次,改造后机械密封使用5年未损毁,达到保护干冰膨胀线冷端工艺泵机械密封的目的。     

汽车工业中水回用于冷却水系统的研究

汽车生产过程中伴随着大量的自来水消耗与废水排放,因此,汽车工业具有较大的节能减排潜力.国内某汽车厂采用膜过滤技术对达标排放的废水进行深度处理,中水水质达到冷却水回用标准,作为补充水回用于循环冷却水系统.通过对中水水质的监控和冷却水系统的运行控制,保证中水回用实施效果.结果表明:中水回用后,循环冷却水满足系统运行条件,既节约了自来水的消耗又达到了减少污染物排放的目的,在汽车工业中具有一定的推广应用价值.     

电吸附水处理技术(EST)对污水悬浮物去除效果研究

为了研究电吸附水处理技术(EST)对污水悬浮物的去除效果,本文采用电吸附水处理技术对生活污水中悬浮物进行处理分析,结果表明电吸附水处理系统对悬浮物的去除效果较好,去除率达到74.07%,而电吸附模块本身对悬浮物去除率仅为14.29%,氯离子、进水中悬浮物的浓度及进水中的硬度值均对悬浮物去除效率没有影响。因此,电吸附水处理技术可作为污水处理的一种新型有效方法。     

Propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation

The coupled fluid-structure-rupture model was developed to study the propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation. The dynamic rupture of pipe and propagation of blast wave were well coupled together in every timestep during the simulation. The numerical model was validated with experiments in terms of both typical rupture profiles and blast overpressures. Results reveal that crack branching of pipe can dramatically increase the rupture opening rate which controls the intensity and shape of the resultant blast wave. Due to the process of crack initiation and extension, the blast wave out of the pipe first forms and then is strengthened by the subsequent compression waves. This makes the maximum peak overpressure appears at a certain standoff distance above the rupture. Despite consuming some percentages of energy, the dynamic rupture of pipe generally presents positive effects (up to 2–3 times) on the blast wave intensity along the jetting direction due to the convergence effect of rupture opening on the release of internal high-pressure gas. Finally, through defining normalized overpressure and impulse based on the same hydrogen detonation in open spaces, the quantitative influences of pipe rupture on the blast wave intensity in cases of different detonation pressures and standoff distances are clarified.     

基于光纤分布式测温的污水管道入流识别方法研究

针对排水管网物探检测需断水操作和无法对管道内部实时探查的问题,建立了一种基于光纤分布式测温的污水管道入流诊断方法,实现了无干扰条件下污水管道污水和雨水入流实时监控.采用感温光缆对选择的试验管段开展了时空高精度观测(空间精度1m、时间精度1min),获得了超过118万个管道水温数据.基于解析出的管道水温时空图像,提出了基于水温温差背景噪声值的入流定位方法;确定出无外部入流影响时管道水温空间和时间温差的背景噪声值分别约为±0.2℃和±0.5℃.采用水温图像降噪处理方法,自动识别出污水管道的旱天污水接入和雨天雨水接入事件,与现场调查结果一致.因此,该方法对污水管道入流的动态识别定位具有可靠性.     

pH值、硫酸根和温度对钢管管垢中铬释放的影响

以市政供水管网钢管管垢为研究对象,将垢层由外向内分为表层、硬壳层和疏松多孔层.利用SEM、BET、XRD、XPS和分形态提取等技术对预吸附Cr （Ⅵ）前后的各层管垢进行表征和分析,并探究了pH值、SO₄^2-浓度和温度对各层管垢中Cr释放的影响.结果显示,钢管各层管垢的主要成分均为α-FeOOH,吸附性能排序为表层>疏松多孔层>硬壳层,管垢中铁元素大多以三价和二价形式存在,具有一定还原性.Cr （Ⅵ）通过物理和化学吸附富集于管垢,主要以铁锰氧化物结合态存在,表层管垢富集量最大.酸性环境、SO₄^2-浓度和温度的升高均会促进Cr的释放.强酸性条件下表层Cr释放浓度为中性条件下的2.76倍;SO₄^2-浓度增加使各层管垢的Cr释放量增加0.1~0.4倍;温度升高20℃,表层管垢的Cr释放量增加26.74%.     

推行清洁生产 预防工业污染

推行清洁生产是环境保护政策政策的发展趋势，是协调经济发展与环境保护的重要对策。文章综述了末端治理存在的种种弊端，提出了实现清洁生产的主要途径。     

无砾石微孔管地下渗滤系统处理生活污水的中试研究

进行了无砾石微孔管地下渗滤系统处理生活污水的中试研究。基于不同土壤、不同管径、不同植物的协同效应,对比研究了不同系统处理污水中有机物、氮、磷和SS的去除效果及其影响因素。结果表明,不同土壤、不同管径及不同植物组成的系统,对生活污水中有机物、氮、磷和SS的去除效果差别较大。中试系统对COD、总磷、氨氮、总氮和SS的最佳去除率分别达到86.13%、90.20%、61.24%、65.49%和97.43%,对应的出水COD、总磷、氨氮、总氮和SS的平均浓度分别为64.29、0.69、22.13、26.19和5.56 mg/L。分析表明,进水SS浓度过高、外界温度下降等共同作用是导致系统对生活污水中NH4+-N和TN的去除率相对较低的主要原因。     

电厂循环冷却水处理方案试验

实验研究了阻垢剂HEDP、EDTMPS、PBTCA、DTPMPA、ATMP、PAPEMP在电厂循环水中的应用.通过实验筛选出具有良好处理功效的复合配方:ATMP6mg/L、DTPMPA 4 mg/L、PBTCA 3 mg/L,相应的阻垢率达到92.42%.该复合配方在阻垢性能方面存在协同效应,使得复配处理剂具有良好的阻垢效果.