Painted surfaces--important sources of polychlorinated biphenyls (PCBs) contamination to the urban and marine environment

A study of a large number of samples of flaking old paint from various buildings in Bergen, Norway (N = 68) suggests that paint may be the most important contemporary source of PCBs in this urban environment with concentrations of PCB₇ up to 3.39 g/kg. Twenty-three of the samples were collected from a single building, and the concentrations were found to vary over 3 orders of magnitude. In addition, 16 concrete samples from a large bridge previously coated with PCB-containing paint were collected and separated into outer- and inner samples indicating that PCBs are still present in high concentrations subsequent to renovation. PCBs were found in several categories of paint from wooden and concrete buildings, potentially introduced to the environment by natural weathering, renovation, and volatilization. Consequently, this dispersion may lead to increased levels of PCBs in urban atmospheres, soils, and harbor sediments where high concentrations have resulted in Governmental advice against consumption of certain seafood.     

Simplified heating time calculation using the Schmidt graphical method for PCB-contaminated capacitors undergoing the vacuum thermal recycling process

We discuss the use of the Schmidt graphical method to calculate the time required to heat a polychlorinated biphenyl (PCB)-contaminated capacitor in the vacuum thermal recycling process to the processing temperature of 400°C, and we evaluate the results of the heating time calculation by comparing the calculated values with the corresponding experimental values. The thermal conductivity and specific heat of the insulating paper and the carbonized paper in the capacitor were unknown, so we determined their values from experimental data obtained during the vacuum thermal recycling process. The capacitor element is a multilamination of aluminum foil and insulating paper, so we used an equation for a multilayer plane wall to calculate the value of the thermal conductivity. For the thermal conductivity and specific heat of the insulating paper impregnated with PCBs, we used values calculated from the mass ratios and thermal conductivities and specific heats of the individual materials. In addition, the physical properties vary according to the treatment because of the evaporation of PCBs and the carbonization of the insulating paper, so we modified the values of the thermal conductivity, specific heat, and density at the boiling point of the PCB and the carbonization point of the insulating paper before performing the calculations. Our calculated heating times were almost the same as, or were above, the experimental values, so we concluded that our method can be used as a simple calculation of the heating time.     

Organochlorine concentrations in franciscana dolphins, Pontoporia blainvillei, from Brazilian waters

Blubber samples were collected from ten franciscana dolphins either incidentally captured in fishing operations or stranded on São Paulo (SP) and Paraná (PR) states littoral, Southeastern and Southern Brazilian coast, respectively. Determination of PCB, DDT and HCB concentrations were performed by capillary gas chromatograph coupled to electron capture detector (ECD). ΣDDT, ΣPCB and HCB concentrations ranged from 264 ng g⁻¹ to 5811 ng g⁻¹ lipid, from 909 ng g⁻¹ to 5849 ng g⁻¹ lipid and from 10 ng g⁻¹ to 61 ng g⁻¹ lipid, respectively. Regarding DDTs, the distribution of the mean percentages decreased in the following order: p,p′-DDE > p,p′-DDD > p,p′-DDT. The ΣDDT/ΣPCB ratio varied between 0.27 and 0.42 in Northern and Central SP coast, while in Southern SP and PR coast the values were 1.6 and 1.9, respectively. Dissimilarities in ΣDDT/ΣPCB ratios point to different sources of organochlorine compounds to franciscana dolphins in the study area. Considering the endocrine disruptive action of organochlorine compounds, the concentrations found in franciscana dolphins from Brazilian waters may represent an additional obstacle to the conservation of this endangered cetacean species.     

Atmospheric concentrations, occurrence and deposition of persistent organic pollutants (POPs) in a Mediterranean coastal site (Etang de Thau, France)

Atmospheric concentrations and deposition fluxes of PCDD/F and PCB have been evaluated over a 1-year period in a Mediterranean coastal lagoon (Etang de Thau, France). Indicative PBDE air concentrations in the hot season are also reported in this work. ∑2,3,7,8-PCDD/Fs and ∑18PCBs (gas + particulate) air concentrations ranged from 67 to 1700 fg m⁻³ and from 13 to 95 pg m⁻³, respectively whereas ∑8PBDEs (gas + particulate) summer time levels varied from 158 to 230 pg m⁻³. The PCDD/F and PCB atmospheric occurrence over Thau lagoon and subsequent inputs to the surface waters are determined by an assemble of factors, being the seasonality of atmospheric concentration, the air mass origin and meteorological conditions important drivers. Total (wet + dry) ∑2,3,7,8-PCDD/Fs and ∑18PCBs deposition fluxes to Thau Lagoon waters are 117 and 715 pg m⁻² d⁻¹, respectively.     

NDL-PCBs in muscle of the European catfish (Silurus glanis): An alert from Italian rivers

The non-dioxin-like polychlorinated biphenyls (NDL-PCBs) highly contribute to the PCB dietary intake of total PCBs. Most of the NDL-PCBs are assumed through ingestion of contaminated fish and fishery products. Therefore, it is important to quantify their presence in aquatic organisms to evaluate human risks associated with fish consumption. The European catfish is a top food-chain predator and is considered a reliable bio-monitoring tool reflecting the state of the environmental organic pollution. From 2006 to 2009, 54 European catfish were captured in four sites covering the area of the Po River (North Italy), and their muscles were analysed to determine the levels of 18 PCBs congeners. All samples presented detectable levels of 18 congeners and, on average, results showed an important presence of NDL-PCBs. The sum of the six congeners (28, 52, 101, 138, 153, 180 IUPAC) was used as indicator of the total PCBs concentration. The 33% of the samples analysed exceeded the maximum levels of 125 ng g⁻¹ set by European regulations in fish. The values measured ranged from 19.7 to 1015.4 ng g⁻¹ (mean 135.6 ± 149.8 ng g⁻¹).     

Photocatalytic decomposition on nano-TiO₂: destruction of chloroaromatic compounds

Photocatalysis is applied increasingly in addressing and solving environmental and energy-related problems. Especially the TiO₂-derived catalysts attract attention because of their catalytic efficiency, wide range of applications, ease in use, and low cost (it costs about 150 Yuan a kilogram in China). This review first describes the principles of photocatalytic destruction by semiconductors and then focuses on degradation rates and reaction mechanisms in a variety of photocatalytic uses of modified TiO₂. Finally, these concepts are illustrated by selected examples relating to the photocatalytic degradation of organic persistent pollutants, such as polychlorinated benzenes (PCBz), biphenyls (PCB) and dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). And some approaches towards industrial application are analyzed.     

Synthesis,separation and structure determination of 2,3,3'‐trichlorobiphenyl (PCB 20)† and 3,3’,4‐trichlorobiphenyl (PCB35)†

The combined synthesis and spectrometric characterization of 2,3,3'‐trichlorobiphenyl (PCB 20) and 3,3’,4‐trichlorobiphenyl (PCB 35) is described for the first time. By a combination of highly efficient column distillation and repeated recrystallizations it was possible to isolate the two products as reference materials with a purity exceeding 99%. X‐ray analysis of crystals of 2,3,3'‐trichlorobiphenyl positively identified the substitution pattern of the biphenyl moiety by chlorine atoms. The two phenyl rings are at an angle of 52°, while the relative disposition of the chlorine atoms on both rings is closer to anti than to syn.     

印刷线路板在复合环境下的腐蚀

印刷线路板几乎会出现在每一种电子设备当中,它是以绝缘材料辅以导体配线所形成的结构元件。印刷线路板的腐蚀形式符合大气腐蚀的基本规律,但又有自己的特点。本文概述了印刷线路板在气体污染物、灰尘、潮湿、高温等多因素复合环境条件下的失效形式及腐蚀机理,其主要的腐蚀形式是:电偶腐蚀、电解腐蚀和缝隙腐蚀;文中还简单总结了印刷线路板腐蚀的主要影响因素,其主要的影响因素是:湿度、温度、腐蚀性气体和固态污染物等。     

Congener-specific egg contribution of polychlorinated biphenyls to nestlings in two passerine species

Quantifying polychlorinated biphenyl (PCB) residues in nestlings of avian species is a common method for assessing trophic transfer and risk at PCB-contaminated sites. The proportion of nestling PCB mass due to maternal transfer is often accounted for by subtracting total PCB mass in eggs from nestlings. However, variation in physicochemical properties and metabolism among congeners may lead to differences between egg contribution based on total PCBs and dioxin-like congeners. We examined congener-specific variation in contribution of PCBs from eggs to nestlings in tree swallows and European starlings. Egg contribution of total PCB mass was 14.3 and 16.2%, respectively, whereas contribution based on dioxin-like congeners was 14.8 and 13.6%, respectively. These data suggest that using total PCB mass in eggs to adjust estimates of PCB accumulation in nestlings may not reflect patterns for dioxin-like congeners, potentially over or under-estimating the risk of toxicity of PCBs.     

Polychlorinated biphenyls in freshwater salmonids from the Kerguelen Islands in the Southern Ocean

The Subantarctic Kerguelen Islands (49°S, 70°E) contain freshwater ecosystems among the most isolated in the world. Concentrations of polychlorinated biphenyls (PCBs) were assessed in the muscle of 48 brook trout and 38 brown trout caught during summer and spring 2006 in the rivers, lakes and ponds of Kerguelen. The sum of 29 PCBs averaged 404 and 358 ng g⁻¹ lipid, and dioxin-like PCB was 19 and 69 ng g⁻¹ lipid, in brook and brown trout, respectively. The values showed a high variability and some fish accumulated PCBs at levels similar to those of fish from impacted areas. While inter-sex differences were limited, the season and the morphotype appeared to have the most influence. Fish captured in summer had muscle PCB concentrations about three times higher than those caught in spring and the ‘river’ morphotype of brook trout showed the highest PCB levels.