基于析因设计的多种重金属对发光菌联合毒性研究

文章采用析因设计的方法,研究沉积物水浸提液掺杂的多种重金属Cu、Cd、Zn、Pb和Ni对发光菌的联合毒性。通过对试验结果进行方差分析和多元线性回归,建立了重金属浓度和发光菌发光抑制率的关系模型:T=97.983Cu+41.111Cd-27.297Zn+129.869Pb+16.715Ni-5 803.639Cu*Cd+2 270.182Cd*Zn-6 411.870Cd*Pb-675.052Cd*Ni-3 108.544Pb*Ni+15 9552.434Cd*Pb*Ni+274 718.434Zn*Pb*Ni。模型分析结果表明:Zn对联合毒性产生负的影响,Cu、Cd、Pb、Ni对联合毒性具有正的贡献;Cd*Zn二元交互作用和Cd*Pb*Ni、Zn*Pb*Ni三元交互作用表现为协同作用,Cu*Cd、Cd*Pb、Cd*Ni、Pb*Ni二元交互作用表现为拮抗作用,而重金属四元和五元交互作用对联合毒性的贡献不显著。上述重金属联合毒性的作用可为沉积物中重金属复合污染控制提供参考。     

环境保护在电网工程设计中的应用

在变电站和送电线路设计中,严格执行环保法,按照避让、弱化、防控、修复的原则,采取有效措施,减少对环境的影响,实现环境保护,以满足可持续发展的需要。     

一株微生物絮凝剂产生菌的培养基优化研究

利用单因子实验和部分因子实验对实验室保藏的产絮凝剂菌种C3的培养基进行优化,以提高C3菌所产生的微生物絮凝剂MBFC3的絮凝效果.实验结果表明,C3菌产MBFC3的最适培养基为: 蔗糖1.0 g,(NH4)2SO4 0.24 g,FeSO4 0.10 g,KH2PO4 0.40 g,MgSO4 0.01 g,NaCl 0.02 g,蒸馏水100 mL,pH值自然.在此培养条件下,C3菌所产生的微生物絮凝剂MBFC3对高岭土悬浮液的絮凝率可达到99.1%.实验中还发现,培养基中(NH4)2SO4和NaCl的用量是影响MBFC3絮凝效果的显著因素.     

Vertical and temporal distribution of nitrogen and phosphorus and relationship with their influencing factors in aquatic-terrestrial ecotone： a case study in Taihu Lake, China

Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone （ATE） of Taihu Lake were investigated, and the relations among N, P, ORP （oxidation reduction potential）, TOC, root system biomass and microorganism were studied. As a whole, significant declines in TN, NO3^--N, DON （dissolved organic nitrogen） and TP concentration in soil solution have occurred with increase of the depth, and reached their minima at 60 cm depth, except for NH4^＋-N, which increased with depth. The concentration of TP increased gradually from spring to winter in the topsoil, the maximum 0.08 mg/L presented in the winter while the minimum 0.03 mg/L in spring. In the deeper layer, the concentration value of TP fluctuated little. As for the NO3^--N, its seasonal variation was significant at 20 cm depth, its concentration increased gradually from spring to autumn, and decreased markedly in winter. Vertical and temporal distribution of DON is contrary to that of NO3^--N. The results also show that the variation of N and P in the percolate between adjacent layers is obviously different. The vertical variation ofTN, TP, NO3^--N, NH4^＋-N and DON is significant, of which the variation coefficient of NO3^--N along the depth reaches 100.23%, the highest; while the variation coefficient of DON is 41.14%, the smallest. The results of correlation analysis show that the concentration of nitrogen and phosphorus correlate significantly with TOC, ORP, root biomass and counts of nitrifying bacteria. Most nutrients altered much from 20 to 40 cm along the depth. However, DON changed more between 60 and 80 cm. Results show that soil of 0-60 cm depth is active rhizoplane, with strong capability to remove the nitrogen and phosphorus in ATE. It may suggest that there exists the optimum ecological efficiency in the depth of above 60 cm in reed wetland. This will be very significant for ecological restoration and reestablishment.     

基于我国规范与PIARC标准的公路隧道需风量分析

以某长大高速公路隧道为例,结合我国隧道通风设计规范JTJ026.1-1999与PIARC2007标准(世界道路协会),针对不同行车速度,不同车辆更新情况、不同排放标准组合形式以及是否考虑NOx等情况,对各个不同工况的需风量分别进行计算,并从需风量计算方法、机动车排放量和污染物设计浓度三个方面对隧道需风量差异进行分析。研究结果表明:我国设计规范与PIARC2007存在较大差距,为了适应当前及今后我国交通量及机动车排放特点的发展趋势,我国现行规范应在机动车排放量、污染物设计浓度限值等方面做出必要改进以达到合理确定隧道需风量的目的。     

中心组合设计优化S-Cr-TiO2催化剂光降解工艺条件

在确定的温度和光照条件下,采用中心组合设计法研究了固相反应法合成的硫与铬共掺杂二氧化钛(S-Cr-TiO2)光催化剂与水溶苯胺蓝(ANB)可见光降解过程中的三个作用因子:催化剂的浓度、水溶苯胺蓝水溶液的pH值及其初始浓度之间的相互作用关系,得到了影响因子与降解速率之间的回归方程及因素之间相互作用的响应面图.结果表明,S...     

生态经济城市建设的SWOT分析与策略研究——以粤北山区韶关市为研究样本

生态经济城市通过城市生态、经济与社会系统的动态协调,形成一个生态高度有效保护、经济良性高效发展、人与自然和谐相处的整体功能系统,代表了现代和未来城市发展的方向.作为全国首批六个生态文明建设试点地区之一和广东省的生态发展区,韶关市加快生态经济城市建设符合这一发展潮流和趋势.根据SWOT分析方法,对韶关市生态经济城市建设面临的优势、劣势、机遇和挑战进行分析,不仅为韶关生态经济城市建设提供策略依据,而且为其它类似地区的生态经济城市建设提供借鉴.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

上海市环保行政审批系统的设计与实现

上海市环保局行政审批系统采用流程控制和数据传输交换技术,构建了申报系统、审批系统、业务管理系统、跟踪监控系统四部分,实现了包括建设项目环评、固废、辐射等15项行政审批和23项非行政审批事项的“一口受理、一办到底”,通过信息技术实现了外网申报、内网审批,实现了环保审批流程优化再造和审批全过程公开透明,实现了“便民审批”、“高效审批”、“阳光审批”。     

重质油储罐固定式泡沫灭火系统设计优化研究

通过重质油储罐的实体火灭火试验,获得了氟蛋白泡沫液和水成膜泡沫液的供给强度与灭火时间对应关系数据,确定了每种泡沫液扑救重质油储罐火灾的最低泡沫供给强度;以10 000 m3固定顶重质油储罐为例进行了泡沫系统设计计算,将优化设计方案与原有设计方案进行了对比,主要变化是泡沫发生器数量从4只提高至6~8只,泡沫主管线管径从DN200提高至DN250,泡沫消防泵流量也相应提高。优化后的储罐泡沫灭火系统提高了泡沫灭火能力,提升了系统的可靠性,降低了储罐火灾风险。