CFD技术在水处理紫外消毒中的应用

介绍了紫外消毒在水处理中应用的现状,阐述了计算流体力学(CFD)的基本原理及其应用背景;论述了CFD技术在紫外消毒模型建立方面的关键因素:水力、辐射和剂量模拟;从消毒效率预测和设备结构优化两个方面对CFD技术在水处理紫外消毒中的应用进行了分析,并对其前景进行了展望,提出了今后的研究重点。     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

低温等离子体-催化协同降解挥发性有机废气

低温等离子体-催化协同技术适合于各类挥发性有机物的治理,特别是大气量低浓度的有机废气的处理.高效催化剂的加入可 以显著提高等离子体反应中有机废气的降解效率,减少有害副产物的生成以及提高反应器的能量利用率.从反应器、催化剂以及背景气体等方面探讨了该技术实现产业化需要解决的问题,结合低温等离子体与催化剂的相互作用、等离子体...     

广州大气挥发性有机物的臭氧生成潜势及来源研究

2008年秋季在广州城区及其下风向沿海乡村地区采用活性炭吸附管采集大气挥发性有机化合物(VOC),应用二次热解吸-GC/MS联用技术测量56种VOC的大气浓度,研究在典型海陆风条件下VOC的组成特征和日变化规律,并采用臭氧最大增量及OH自由基反应活性两种方法估算了该地区各VOC的臭氧生成潜力,探讨了VOC优先控制物种及...     

臭氧处理循环冷却水节能减排效益分析

文章基于臭氧(O3)处理法处理循环冷却水因可以同时达到阻垢脱垢、缓蚀、杀菌等多重功能,其在国外已得到广泛应用,同时国内也逐步普及应用的环境下,结合国内外长期的工程实践经验,从节水、节能、减排和公共卫生效益四个方面,详细分析了臭氧处理循环冷却水所带来的巨大经济效益、社会效益和环境效益。     

臭氧对枯草芽孢杆菌孢子的灭活研究

隐孢子虫灭活困难,给饮用水安全带来了挑战。实验以枯草芽孢杆菌孢子(ATCC6633)作为隐孢子虫的指示菌,研究了臭氧浓度、浊度、有机物、温度等因素对臭氧灭活枯草芽孢杆菌孢子的影响。研究表明,臭氧对枯草芽孢杆菌孢子的灭活与CT值相关,臭氧浓度对消毒效果影响较小;降低浊度、有机物含量,能提高臭氧对枯草芽孢杆菌孢子的灭活效率;温度降低,为保证一定的消毒效率,所需的CT值越大。研究结果为水厂合理控制运行参数提供了借鉴。     

Carbonyl emissions from heavy-duty diesel vehicle exhaust in China and the contribution to ozone formation potential

Fifteen heavy-duty diesel vehicles were tested on chassis dynamometer by using typical heavy duty driving cycle and fuel economy cycle. The air from the exhaust was sampled by 2,4- dinitrophenyhydrazine cartridge and 23 carbonyl compounds were analyzed by high performance liquid chromatography. The average emission factor of carbonyls was 97.2 mg/km, higher than that of light-duty diesel vehicles and gasoline-powered vehicles. Formaldehyde, acetaldehyde, acetone and propionaidehyde were the species with the highest emission factors. Main influencing factors for carbonyl emissions were vehicle type, average speed and regulated emission standard, and the impact of vehicle loading was not evident in this study. National emission of carbonyls from diesel vehicles exhaust was calculated for China, 2011, based on both vehicle miles traveled and fuel consumption. Carbonyl emission of diesel vehicle was estimated to be 45.8 Gg, and was comparable to gasolinepowered vehicles （58.4 Gg）. The emissions of formaldehyde, acetaldehyde and acetone were 12.6, 6.9, 3.8 Gg, respectively. The ozone formation potential of carbonyls from diesel vehicles exhaust was 537 mg O3/km, higher than 497 mg O3/km of none-methane hydrocarbons emitted from diesel vehicles.     

再生水中5种抗生素抗性菌的紫外线灭活及复活特性研究

抗生素抗性菌作为再生水中的新兴污染物而受到广泛关注.为探明紫外线对抗生素抗性菌的灭活和消毒后抗性菌的复活潜能,研究了以城市污水为水源的再生水(简称"再生水")中青霉素抗性菌、氨苄青霉素抗性菌、头孢氨苄抗性菌、氯霉素抗性菌和利福平抗性菌的紫外线灭活特性,并考察了再生水中的抗生素抗性菌在黑暗条件下的复活潜能.结果表明,20mJ·cm-2紫外线消毒剂量下,实际再生水中青霉素抗性菌、氨苄青霉素抗性菌、头孢氨苄抗性菌和氯霉素抗性菌的灭活率均高于4-log,与总异养菌群灭活率相当,而利福平抗性菌的灭活率(3.7-log)略低于总异养菌群.紫外线消毒后,再生水静置22 h后,抗生素抗性菌普遍出现复活现象,当紫外线消毒剂量为常规剂量20 mJ·cm-2时,消毒后再生水中的抗生素抗性菌菌落形成能力高达3-log.因此,常规的紫外线消毒剂量不能有效控制再生水储存或运输过程中抗生素抗性菌的复活.     

化学合成类制药行业工艺废气VOCs排放特征与危害评估分析

以浙江台州6家典型化学合成类制药企业为代表,对其排放工艺废气中的18项挥发性有机物(VOCs)特征污染物(如甲苯、甲醛、二氯甲烷等)进行监测和分析,并采用臭氧产生潜力(OFP)和健康风险评价指标对VOCs所产生的环境与健康危害进行初步的评价.结果表明,化学合成类制药企业排放的总VOCs浓度为14.9~308.6 mg·m-3,其产生环境危害的OFP值为3.1~315.1 mg·m-3,主要贡献物质为甲苯、四氢呋喃、乙酸乙酯等6种物质,存在较大的潜在环境危害.另外,健康危害中的非致癌风险指数和总致癌风险指数介于9.48×10-7~4.98×10-4a-1和3.17×10-5~6.33×10-3之间,主要是苯、甲醛和二氯甲烷这3种致癌物.     

化学消毒的中和剂对水中内毒素活性检测的影响

本研究选取化学消毒的常用6种中和剂组氨酸、甘氨酸、抗坏血酸、吐温80、亚硫酸钠和硫代硫酸钠,采用动态浊度鲎试验定量检测样品中内毒素活性,研究中和剂在不同浓度范围内单独使用对内毒素活性检测的影响,旨在优选出适于鲎法检测细菌内毒素的中和剂种类,确定合适的浓度范围.结果表明在0~1.0%浓度范围内,除了甘氨酸和硫代硫酸钠之外,组氨酸、抗坏血酸、吐温80、亚硫酸钠(碱性和中性)均对鲎试验结果有不同程度的干扰,都不能在鲎试验之前作为化学消毒的中和剂.虽然0~1.0%浓度的甘氨酸对鲎试验结果基本无明显影响,但是甘氨酸和戊二醛的中和产物显黄色,所以不适于在光度法鲎试验中用作戊二醛的中和剂.0~1.0%浓度的硫代硫酸钠对鲎试验结果基本无明显干扰,但是当浓度升高至1.0%~5.0%时会对鲎试验结果有一定的抑制作用.与组氨酸、甘氨酸、抗坏血酸、吐温80和亚硫酸钠相比,硫代硫酸钠更适于在内毒素活性检测之前用作消毒剂的中和剂,但是浓度应控制在0.5%范围以内.