Energy efficiency and appliance’s characteristics considered prior to purchase: Differences and similarities between the United Kingdom,Germany, Portugal,Greece, Poland,Spain and Italy

This article reports country differences in the consumer’s most considered characteristics when choosing electrical appliances, including but not restricted to the energy efficiency aspect. A survey was performed to store customers from 7 countries: the United Kingdom; Germany; Portugal; Greece; Poland; Spain; Italy. Results showed consistency between countries in the top three characteristics considered: cost; quality; and a balance between price and quality. Differences were found for reported environmental attitudes and behaviours, purchase motives, and store employees evaluation. The results may support national policies and store level energy efficiency interventions. Specifically, they can provide input for store employee’s training, in persuading customers towards the purchase of energy efficient appliances.     

Efficiency enhancement in solar air heaters by modification of absorber plate-a review

This paper outlines a complete review on modifications made on the absorber plate of solar air heaters in order to improve the turbulence and heat transfer rate, thereby efficiency. Corrugated sheets, fins, extended surfaces, wire mesh, porous medium, etc., are a few of the modifications used. Most of such alterations in the absorber plate resulted with an increase in efficiency but associated with drawback of increased pumping power due to raising friction factor. Pumping power is considered here as a predominant comparison parameters of various solar air heaters with different absorber plate in terms of effective efficiency.     

An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

电网发展、清洁电源接入与地区能源效率

鉴于我国已经建成全球规模最大的超高压和特高压电网,彻底弥补了电力跨区配置的电网基础设施短板,并且为清洁电源并入电网和跨区消纳提供了完善的基础设施,不仅克服我国电力负荷中心和能源基地的区域布局不协调,而且有益于缓解日益严峻的能源利用率低下和环境污染问题。本文利用1991—2012年全国29个省市面板数据实证研究了清洁电源并网对地区全要素能源效率的影响。为保证实证结果稳健性分别在线性和非线性实证框架下采用系统广义矩估计(SYS-GMM)和面板平滑转换模型(PSTR)两种方法估计了清洁电源接入高压、超高压和特高压电网的地区全要素能源效率异质性效应。实证结果显示:(1)我国电网基础设施对地区全要素能源效率具有明显的增进效应,特别是超高压电网在促进全要素能源效率提升上表现的最为突出,在特高压骨干网架尚未形成的情况下起到了支柱性作用。(2)高压、超高压、特高压与清洁电源交互项的估计系数始终位于负数区间,反映清洁电源并网的能源效率绩效并不明显,受限于并网规模和机制缺陷,还没有发挥出全要素能源效率提升作用。(3)随着人均GDP的不断提高,各等级电网对地区能源效率的益处越来越明显,并且存在着门槛效应。(4)特高压电网对地区能源效率的积极作用主要表现在东部沿海高收入省份,这些省份作为电力消费负荷中心,大规模接入清洁电源对能源效率改善裨益明显。接下来,需要根据地区的能源禀赋结构选择清洁电源的并网模式,完善的电网基础设施、合理的电源结构还需要配置以高效的清洁电源并网机制才能不断增进地区全要素能源效率。     

基于超效率DEA模型的三峡库区生态效率评价及空间演化格局分析

本文基于2010—2017年的统计数据,首先采用超效率DEA模型对三峡库区26个区县的生态效率进行测算,然后运用空间自相关分析方法对三峡库区生态效率的演化格局进行了实证分析,探索三峡库区生态效率的时空动态演变特征。研究表明:2010—2017年三峡库区生态效率平均水平处于0.5601～1.1920,整体呈现波动性变化趋势,生态效率在一定程度上有所改善,但是整体水平仍然较低;从区域层面看,各个区县间生态效率水平不平衡,空间分布上呈现"西高东低"的非均衡性特征。局部空间自相关分析表明,三峡库区2010—2017年集聚性呈逐渐减弱态势,空间异质性逐渐增加,整体的生态效率差异变大。最后依据实证研究分析结果,本文对如何提升三峡库区生态效率提出了相应的政策建议。     

我国区域空气污染治理效率及其影响机制——基于超效率SBM模型和门槛回归模型

随着人民对美好生活需求的日益增长,政府空气污染治理的效率问题日益得到重视。本文从地方政府空气污染治理效率及其影响因素的视角入手,以全国30个省份为研究对象,运用超效率SBM模型测算2003—2015年各省级区域的空气污染治理效率。在此基础上,运用门槛回归模型分析政府空气污染治理效率的影响机制。研究表明:①地区间空气污染治理效率差异性较为显著。中部、西部空气污染治理效率整体呈下降趋势。东部和东北地区空气污染治理效率则上升比较平稳。②政策规划、碳源、污染物排放和环境治理投入表现出双重门槛特征,其中碳源对空气污染治理效率影响显著,而以碳为首的能源消费结构则主要对中部和西部空气污染治理效率产生影响。落后地区政府应注重产业升级,财政上应对碳税等税目进行征收,产业上应鼓励企业创新,并对落后企业进行倒逼升级。     

振弦栅收集电焊烟尘特性的数值模拟

为高效、低投入地处理电焊烟尘,得到过滤系统净化电焊烟尘的最佳设计参数,选择ICEM-CFD软件建立栅过滤系统的几何模型并进行网格划分,选用标准(Standard)k-ε模型、离散相模型(DPM),利用FLUENT软件对电焊烟尘过滤效率主要影响的单因素进行模拟计算。研究结论表明,用栅过滤系统过滤电焊烟尘颗粒时,振弦栅的栅丝直径、间距所决定填充率是过滤效率的直接决定因素;栅丝层间距是过滤效率的间接影响因素;通过探究振弦栅对电焊烟尘过滤效率的影响规律,进而为振弦栅的实际应用提供理论基础。     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

CO2浓度升高对半干旱区春小麦光合作用及水分生理生态特性的影响

大气CO₂浓度升高已成为世界范围内重要环境问题。为了解大气CO₂浓度升高对春小麦光合作用及水分生理生态特性的影响,在典型半干旱区定西利用开顶式气室(OTC)试验平台,以春小麦“定西24号”为供试品种,开展了CO₂浓度增加模拟试验。试验设对照(390μmol·mol^?1)、480μmol·mol^?1和570μmol·mol^?1等3个CO₂浓度(摩尔分数)梯度。结果表明:在对照和增加CO₂浓度条件下,春小麦叶片净光合速率和蒸腾速率日变化均呈“双峰型”分布,出现明显的“午休”现象;胞间CO₂浓度的日变化表现为斜“V”字型曲线;叶水势日变化呈现反抛物线曲线走向,在中午后出现水势曲线拐点。在不同生育时期内,净光合速率、气孔导度和胞间CO₂浓度均表现为开花期最大,乳熟期最小。而蒸腾速率表现为开花期最大,拔节期最小,叶片水平水分利用效率表现为孕穗期最大,乳熟期最小。随着CO₂浓度升高,春小麦叶片净光合速率、胞间CO₂浓度、水分利用效率和水势提高,气孔导度和蒸腾速率降低。与对照大气CO₂浓度相比,在480μmol·mol^?1浓度和570μmol·mol^?1浓度下,整个生育期净光合速率平均分别提高了14.68%和28.20%,气孔导度平均降低了15.29%和24.83%,胞间CO₂浓度平均提高了10.38%和26.15%,蒸腾速率平均减小了6.63%和12.41%,WUE平均增加了22.9%和46.9%。随着CO₂浓度升高,蒸腾失水减少,叶片水势不断增加,从而增强了春小麦对干旱胁迫的抵御能力。研究结果为我国半干旱区春小麦对全球气候变化下的敏感性及适应性提供理论参考。