2,4-D Mineralization in soil profiles of a cultivated hummocky landscape in Manitoba,Canada

The objective of this study was to quantify 2,4-D (2,4-dichlorophenoxyacetic acid) mineralization in soil profiles characteristic of hummocky, calcareous-soil landscapes in western Canada. Twenty-five soil cores (8 cm inner diameter, 50 to 125 cm length) were collected along a 360 m transect running west to east in an agricultural field and then segmented by soil-landscape position (upper slopes, mid slopes, lower slopes and depressions) and soil horizon (A, B, and C horizons). In the A horizon, 2,4-D mineralization commenced instantaneously and the mineralization rate followed first-order kinetics. In both the B and C horizons, 2,4-D mineralization only commenced after a lag period of typically 5 to 7 days and the mineralization rate was biphasic. In the A horizon, 2,4-D mineralization parameters including the first-order mineralization rate constant (k ₁), the growth-linked mineralization rate constant (k ₂) and total 2,4-D mineralization at the end of the experiment at 56 days, were most strongly correlated to parameters describing 2,4-D sorption by soil, but were also adequately correlated to soil organic carbon content, soil pH, and carbonate content. In both B and C horizons, there was no significant correlation between 2,4-D mineralization and 2,4-D sorption parameters, and the correlation between soil properties and 2,4-D mineralization parameters was very poor. The k ₁ significantly decreased in sequence of A horizon (0.113% day^?1) > B horizon (0.024% day^?1) = C horizon (0.026% day^?1) and in each soil horizon was greater than k ₂. Total 2,4-D mineralization at 56 days also significantly decreased in sequence of A horizon (42%) > B horizon (31%) = C horizon (27%). In the A horizon, slope position had little influence on k ₁ or k ₂, except that k ₁ was significantly greater in upper slopes (0.170% day^?1) than in lower slopes (0.080% day^?1). Neither k ₁ nor k ₂ was significantly influenced by slope position in the B or C horizons. Total 2,4-D mineralization at 56 days was not influenced by slope positions in any horizon. Our results suggest that, when predicting 2,4-D transport at the field scale, pesticide fate models should consider the strong differences in 2,4-D mineralization between surface and subsurface horizons. This suggests that 2,4-D mineralization is best predicted using a model that has the ability to describe a range of non-linear mineralization curves. We also conclude that the horizontal variations in 2,4-D mineralization at the field scale will be difficult to consider in predictions of 2,4-D transport at the field scale because, within each horizon, 2,4-D mineralization was highly variable across the twenty-five soil cores, and this variability was poorly correlated to soil properties or soil-landscape position.     

Use of fugacity model to analyze temperature-dependent removal of micro-contaminants in sewage treatment plants

Effluents from sewage treatment plants (STPs) are known to contain residual micro-contaminants including endocrine disrupting chemicals (EDCs) despite the utilization of various removal processes. Temperature alters the efficacy of removal processes; however, experimental measurements of EDC removal at various temperatures are limited. Extrapolation of EDC behavior over a wide temperature range is possible using available physicochemical property data followed by the correction of temperature dependency. A level II fugacity-based STP model was employed by inputting parameters obtained from the literature and estimated by the US EPA’s Estimations Programs Interface (EPI) including EPI’s BIOWIN for temperature-dependent biodegradation half-lives. EDC removals in a three-stage activated sludge system were modeled under various temperatures and hydraulic retention times (HRTs) for representative compounds of various properties. Sensitivity analysis indicates that temperature plays a significant role in the model outcomes. Increasing temperature considerably enhances the removal of β-estradiol, ethinyestradiol, bisphenol, phenol, and tetrachloroethylene, but not testosterone with the highest biodegradation rate. The shortcomings of BIOWIN were mitigated by the correction of highly temperature-dependent biodegradation rates using the Arrhenius equation. The model predicts well the effects of operating temperature and HRTs on the removal via volatilization, adsorption, and biodegradation. The model also reveals that an impractically long HRT is needed to achieve a high EDC removal. The STP model along with temperature corrections is able to provide some useful insight into the different patterns of STP performance, and useful operational considerations relevant to EDC removal at winter low temperatures.     

亚超临界水技术在废旧尼龙6解聚中的应用

研究了尼龙6在亚超临界水中的解聚反应,以期为废旧尼龙6的回收利用提供技术参数.实验分别利用气质联用仪和紫外分光光度计对解聚后的液相产物进行定性和定量分析,并考察了不同的反应温度、反应压力和反应时间对液相产物收率的影响.结果表明,液相产物绝大部分为己内酰胺;解聚的最佳条件为370 ℃、25 MPa、60 min;己内酰胺最大收率为96%.通过动力学分析和Arrhenius关系计算,得出尼龙6亚超临界水解聚的活化能为64.4 kJ/mol.     

HAN阻隔防爆模型研究

通过合理简化,利用多方气体状态方程,分别建立油品储运容器内可燃混合气体定容爆炸模型和装设阻隔防爆材料的油品储运容器内可燃混合气体爆炸模型,获得了阻隔防爆性能测试装置的燃爆容器抗爆设计限值,以及其在HAN阻隔防爆测试中燃爆容器试爆压力量级的控制下限值,同时,还给出HAN工程应用中容器留空率的计算方法,具有实际指导意义。     

Degradation kinetics and mechanism of aniline by heat-assisted persulfate oxidation

Oxidation of aniline by persulfate in aqueous solutions was investigated and the reaction kinetic rates under different temperature, persulfate concentration and pH conditions were examined in batch experiments. The results showed that, the aniline degradation followed pseudo first-order reaction model. Aniline degradation rate increased with increasing temperature or persulfate concentration. In the pH range of 3 to 11, a low aniline degradation rate was obtained at strong acid system (pH 3), while a high degradation rate was achieved at strong alkalinity (pH 11). Maximum aniline degradation occurred at pH 7 when the solution was in a weak level of acid and alkalinity (pH 5, 7 and 9). Produced intermediates during the oxidation process were identified using liquid chromatography-mass spectrometry technology. And nitrobenzene, 4-4’-diaminodiphenyl and 1-hydroxy-1,2-diphenylhydrazine have been identified as the major intermediates of aniline oxidation by persulfate and the degradation mechanism of aniline was also tentatively proposed.     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

甲苯对土壤芳基硫酸酯酶活性的影响

甲苯作为土壤酶测定的前处理试剂及许多有机污染物在环境中降解的中间产物,有关其对土壤酶的影响研究在土壤酶学和环境科学领域具有重要意义.因此,采用模拟方法,较系统地研究了不同剂量甲苯和处理时间下芳基硫酸酯酶活性的变化规律.结果表明,甲苯对纯酶具有明显的抑制作用,酶活性降幅最大达到45.5%;灭菌土壤对溶液中的纯酶有很强的吸附能力;极微量的甲苯即可完成对土壤中酶活性的激活作用,酶活性增幅为109%～298%;随着甲苯剂量的增加,土壤酶活性的变化幅度逐渐趋缓,并可用Langmuir模型较好地拟合,由此获得了最大表观酶活性Umax,发现其与土壤性质显著相关,说明甲苯主要是通过杀死土壤中的微生物来影响土壤酶活性的.此外,初步探讨了不同土壤中胞外酶量与胞内酶量的关系,发现在供试土样中土壤芳香硫酸酯酶胞外酶和胞内酶分别占54.4%和45.6%.本研究可为后续土壤酶测定质量的完善和提高提供依据.     

微波催化燃烧气态甲苯特性及床层温度分布

采用浸渍法制备Cu-Mn-Ce/堇青石蜂窝催化剂,于微波催化燃烧装置中考察其对甲苯废气的催化活性与稳定性,并对固定床温度进行了测试分析.研究表明,微波加热下床层温度分布均匀,甲苯的最佳反应温度在230~270℃之间.当停留时间大于9.7s且床层温度高于270℃时,甲苯的降解率大于90%.铜锰铈单金属氧化物及其复合氧化物尖晶石是主要的活性组分,甲苯在其表面上进行准一级反应而被催化氧化.高温对催化剂结构有影响,但重复性试验证实了催化剂的高活性和良好的稳定性.本文为微波催化燃烧技术治理VOCs废气的中试研究及下一步的实际应用提供了理论支持.     

2021年夏季新乡市城区臭氧超标日污染特征及敏感性

基于2021年6～8月新乡市市委党校站点观测的挥发性有机物(VOCs)、常规空气污染物和气象参数,采用基于观测的模型(OBM)对臭氧(O₃)超标日的O₃敏感性和前体物的管控策略进行了研究.结果发现,O₃超标日呈现高温、低湿和低压的气象特征.在臭氧超标日,O₃及其前体物的浓度均有上升.臭氧超标日的VOCs最高浓度组分为含氧挥发性有机物(OVOCs)和烷烃,臭氧生成潜势(OFP)和·OH反应性最大的VOCs组分为OVOCs.通过相对增量反应性(RIR)分析,新乡6月O₃超标日臭氧生成处于VOCs控制区,7月和8月处于VOCs和氮氧化物(NO_x)协同控制区,臭氧生成对烯烃和OVOCs最为敏感.6月各前体物的RIR值在一天中会发生变化,但始终保持为VOCs控制区;7月和8月在上午为VOCs控制区,中午为协同控制区,下午分别为协同控制区和NO_x控制区.通过模拟不同前体物削减情景,结果表明削减VOCs始终有利于管控臭氧,而削减NO_x     

The prediction of safe lifting behavior: an application of the theory of planned behavior

PROBLEM: Injuries resulting from lifting are costly, and create significant pain and discomfort. While engineering controls are the most effective means of reducing risks, most organizations continue to rely on manual lifting techniques. The problem, however, is that the use of safe-lifting techniques is inconsistent and managers have a difficult time motivating use of these techniques. Consequently, it is important to understand the factors driving safe-lifting behaviors. METHODS: This study used a survey to apply the theory of planned behavior (Ajzen., I., 1991. The theory of planned behavior. Organization Behavior and Human Processes, 50, 179-211) to safe-lifting among 136 materials management employees at a heavy manufacturing organization. Structural equation modeling and factor analysis were employed to analyze relationships among constructs. RESULTS: Results revealed that perceived behavioral control and intention were the strongest predictors of safe-lifting behavior. Subjective norms, to a lesser degree, were also important influences on intention. Attitudes did not surface as effective direct predictors of safe-lifting behavior, but did affect behavior and intent via mediating factors (subjective norms and perceived behavioral control). Finally, the theory of planned behavior was supported as an effective model explaining safe-lifting behavior, and had potential application for many other safety-related behaviors. IMPACT ON INDUSTRY: Results from this study emphasize the importance of perceived behavioral control as a factor associated with safety-related behavior.