企业逆向物流与循环经济立法之联系

逆向物流给企业带来效益的同时,也带来了生态物流的理念.逆向物流涉及了经济与生态环境两大系统,显现出了自身的特点与积极因素.逆向物流充分体现了循环经济发展之宗旨.加速循环经济的立法,并以相应立法来推动企业尽快实施物流活动是至关重要的.     

Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

This paper considers a two-echelon closed-loop supply chain consisting of a manufacturer and a remanufacturer at the upper echelon and a retailer at the lower echelon. The retailer faces a constant demand from customers, which is satisfied through recovered and new products received from the remanufacturer and the manufacturer, respectively. The manufacturer produces the product with finite rate, whereas the recovery of returned product is instantaneous at the remanufacturer. We develop three models to determine the optimal production-inventory policy of the players for minimizing the joint total cost of the system. In the first model, the retailer receives the product in batches from the manufacturer and the remanufacture simultaneously, whereas in the second and third models, the batches are received alternatively. In the third model, however, the procurement of raw material at the manufacturer is also considered. Numerical illustration is presented to examine the impact of certain key parameters.     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

Performance evaluation of reverse logistics enterprise – an agent-based simulation approach

Reverse logistics (RL) has been applied in many industries and sectors since its conception. Unlike forward logistics, retracing consumer goods from the point of consumption to the point of inception is not a well-studied process. It involves many uncertainties such as time, quality and quantity of returns. The returned products can be remanufactured, have parts harvested, or be disposed safely. It is important to implement these activities in a cost-effective manner. The aim of this research is to measure the performance of the RL enterprise with the help of an agent-based simulation model. The major entities in the RL network are considered as Agents that can act independently. There are several different agents: collector agent, sorting-cum-reuse agent, remanufacturing agent, recycler agent, supplier agent and distributor agent. The individual performances of the agents are measured and recommendations are given to improve their performance, leading to the enhancement of the total performance of the RL enterprise. The approach is applied to a case study involving cell phone remanufacturing.     

反渗透处理稀土氨氮废水试验研究

根据稀土冶炼厂排放的碳铵沉淀洗涤废水的水质情况，采用NH4Cl和 NaCl模拟废水进行了反渗透可行性对比实验。模拟实验发现，在相同条件下反渗透对NaCl 较NH₄Cl 有着更高的去除率，而NH₄Cl 相对NaCl则有着更高的产水速率。实际废水试验结果表明，在恒定操作压力范围内回收率为65%的条件下，NH₄Cl浓度为2.85 g/L的碳铵沉淀洗涤废水经反渗透处理其NH₄Cl去除率为77.3%，可作为氨氮废水的预处理。对该废水处理成本进行了分析，得出其约为2.7元/m³，比相近浓度氨氮废水的氨吹脱处理成本节省约26%。     

基于实时控制技术的CANON工艺稳定性运行

为保证出水水质稳定并提高氨氮去除率,实现CANON工艺的优化,利用SBR反应器进行了基于实时控制技术的CANON工艺稳定性研究.试验过程中,温度控制在30℃±1℃,pH 7~8,通过反应过程中氨氮、硝态氮、亚硝态氮和pH、DO、ORP的变化规律,制定了可行的实时控制策略.结果表明,进水氨氮浓度为917~1 540 mg·L~(-1)时,以6 mg·L~(-1)的剩余氨氮浓度作为控制参数可以满足工艺稳定性的要求,但氨氮传感器存在费用昂贵和误差较大等问题.采用pH、DO和ORP曲线的平台和特征点作为自控参数,可以维持CANON工艺的长期稳定运行,保证氨氮去除率平均维持在99%以上且出水水质稳定.     

石油污染土壤生物修复过程中氮循环功能基因的动态检测

氮循环相关功能微生物在土壤发挥其生态功能中起着重要的作用.为定量分析其中的固氮细菌、反硝化细菌和硝化细菌在石油污染土壤生物修复过程中的演变情况,采用了实时定量PCR技术对其相关功能基因nifH、narG和amoA的拷贝数进行检测.结果表明,污染土壤中nifH、narG和amoA基因拷贝数及其占总16S rRNA基因拷贝数的比例远低于正常土壤,修复后土壤中的同类分析结果与正常土壤接近.表明石油污染物破坏了氮循环相关菌落结构,而生物修复则使其得以恢复.进一步分析了不同修复方式下氮循环功能基因的恢复情况以及土壤中石油烃降解率.也表明同时添加秸秆和菌剂具有最好的修复效果,处理40 d后其nifH、narG和amoA基因拷贝数（以干土计）分别恢复到2.68×106、1.71×106和8.54×104g-1,石油烃降解率达到48%.投加真菌-细菌复合菌剂的效果优于只投加细菌菌剂的效果.本研究结果表明氮循环功能基因的动态监测可以从基因和物种水平上反映土壤修复的效果,为土壤修复的监控和效果评估提供参考.     

短程深度脱氮中试工艺的低温启动和维持

试验采用有效体积为7.0 m3的SBR中试反应器处理生活污水,考察了低温条件下短程深度脱氮工艺的启动方法及稳定性.利用基于鼓风机频率(BF)和pH的实时控制策略对SBR系统进行实时控制.结果表明,SBR系统在低温条件(11～16℃)和50 d内快速启动短程深度脱氮工艺,亚硝酸盐积累率从19.8%上升到90%.在中低温条件(9～28℃)下短程深度脱氮性能维持长达550 d,亚硝酸盐积累率始终维持在95%左右,出水TN浓度维持在3 mg·L-1,TN去除率维持在95%以上.由此可见,低温下启动SBR短程深度脱氮工艺并长期维持完全可行.     

MBR＋纳滤＋反渗透工艺处理垃圾渗滤液实验研究

摘要：结合青岛市某生活垃圾处理场工程实例,介绍了MBR工艺处理垃圾渗滤液的工艺流程、原理等,分析了MBR工艺处理垃圾渗滤液的特点和优势。垃圾渗滤液经过MBR工艺处理,生化部分采用前置反硝化／硝化工艺,再经纳滤／反渗透等膜分离技术和其他方法处理,最终流出液水质可以达到《生活垃圾填埋场污染控制标准》（GB16889—2008）。