Decomposition of CF3CI by corona discharge

In this paper pulsed corona discharge is shown to be effective for the decomposition of CF₃Cl(Freon-13).The pressure of CF₃Cl was 2.67×10³Pa,after discharged for 2 min,39.5% of CF₃Cl was decomposed.The products were mainly CF₄,Cl₂ and CF₂Cl₂.The yield increased by adding O₂ or air.Under the same conditions,more than 94% decomposition yield was obtained if 5.32×10³Pa O₂ or air was added.The composition of products became CF₂O,Cl₂ and CF₄.While the partial pressure of O₂ or air reached 1 arm,the decomposition yield decreased to 54.5% and 48. 5% respectively.     

难降解有机废水处理新技术

介绍了光氧化法、超临界氧化和低温等离子体化学三种废水处理新技术的原理,国内外研究的现状和未来的发展前景,分析了这些新技术在优化污染物废水处理方面得到工业应用所必须解决的主要技术问题.     

等离子体技术在固体废弃物处理中的应用

简要介绍了等离子体的相关概念及其处理污染物的工作原理，阐述了等离子体技术在固体废弃物治理方面的应用研究概况，并对等离子体在固体废弃物治理中的应用作了市场前景分析，说明了该技术在固体废弃物治理中具有一定的应用前景。     

等离子体催化降解甲苯途径的原位红外研究

考察了在常温常压条件下,等离子体分别协同SiO₂、Al₂O₃、NiO/Al₂O₃降解甲苯的性能,并从材料的介电常数、对甲苯的吸附性及臭氧分解能力等角度分析了不同活性表现的原因,同时,采用原位红外技术研究了甲苯降解过程中催化剂表面吸附物种的变化.结果表明,当甲苯浓度为100 ppm,气体流量为100 mL·min^-1时,一定范围内,甲苯降解率随着能量密度、介电常数、吸附性及臭氧分解能力的提高而提高.甲苯在催化剂表面的吸附对其降解途径有十分重要的影响:在放电区域中加入SiO₂,甲苯仍然在气相中完成降解;而存在Al₂O₃ 及NiO/Al₂O₃时,甲苯氧化成苯甲酸的过程主要发生在催化剂表面,是甲苯催化降解的关键步骤,苯甲酸在活性位点的积累将降低催化剂的反应活性.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

具有自动清洗功能的低温等离子油烟净化装置设计与实现

为了克服现有的油烟净化器清洗困难、清洗成本高的不足,提供一种具有自动清洗功能的低温等离子油烟净化器,该具有自动清洗功能的低温等离子油烟净化器可随时清洗吸附的油烟,并且清洗容易、成本低。     

Determination of alkali-labile phosphoprotein phosphorus from fish plasma using the Tb^3＋-tiron complex as a fluorescence probe

A sensitive method based on the fluorescence quenching effect of the Tb^3＋-Tiron complex is proposed for the determination of alkali-labile phosphoprotein phosphorus （ALP） released from fish plasma. The detection limit was 5.4 ng/ml （S/N=2）, and the relative standard deviation of the quenching effect （6 replicates） was 4.6%. The results obtained by the proposed method were in good agreement with those obtained by the colorimetric assay. The advantages of the present method are its relatively simple detection procedure, the lack of toxic organic solvents, and high sensitivity.     

低温等离子体-催化协同降解挥发性有机废气

低温等离子体-催化协同技术适合于各类挥发性有机物的治理,特别是大气量低浓度的有机废气的处理.高效催化剂的加入可 以显著提高等离子体反应中有机废气的降解效率,减少有害副产物的生成以及提高反应器的能量利用率.从反应器、催化剂以及背景气体等方面探讨了该技术实现产业化需要解决的问题,结合低温等离子体与催化剂的相互作用、等离子体...     

等离子体催化降解有机废水研究

研究了多种因素对高压脉冲介质阻挡放电低温等离子体法处理印染废水效果的影响。通过实验得出结论:随着有效处理时间和峰值外施电压的增加,废水中的有机物的去除率增加;随着水样浓度的增加,废水中有机物的去除率降低;随着催化剂(TiO)2量的增加,废水中有机物的去除率先升高后降低,最佳催化剂的加入量为0.5 g/L TiO2悬浮液0.5 mL。     

电晕放电等离子体技术处理水中四环素的研究

采用电晕放电等离子体技术降解水中的四环素,研究了在反应体系中,初始浓度、输入功率、电极间距、空气流量及初始pH对四环素去除效率的影响.同时,还对四环素在降解过程中不同时段的COD、TOC和B/C变化进行了研究,并对其降解产物进行了分析和讨论.实验结果表明:电晕放电等离子体对水中四环素具有较好的去除效果,在四环素初始浓度为200 mg·L-1、pH=2.47、初始电导率为1.50 mS·m-1、空气流量为0.06 m3·h-1、电极间距为4 mm、输入功率为45.0 W的条件下,反应20 min后,四环素的去除率可达到99.1%,COD去除率可达31.2%,TOC去除率可达80%左右,其B/C比提高为0.30,有效地改善了废水的可生化性.