纤维增强气凝胶复合材料高温结构转变及热稳定性研究

目的研究高温受热条件下纳米复合隔热材料的结构转变特征及热稳定性。方法采用扫描电镜、X射线衍射仪、红外光谱仪及热重仪等检测方法。结果纤维增强气凝胶材料从室温到650℃存在连续的质量损失,从室温到放热前,质量损失为1.66%;365℃开始出现放热,温度升至398℃时达到峰值,整个放热过程对应质量损失约为1.3%;从435℃放热结束开始到650℃的质量损失为1.46%。经过400℃热处理后,试样比表面积从268m~2/g增加到437m~2/g;当试样热处理温度达到600℃时,试样的比表面积明显随之降低至198m~2/g。结论 SiO_2气凝胶复合材料以无定形结构为主,存在少量的二氧化钛晶体。在400℃左右,SiO_2气凝胶结构中硅甲基Si—CH_3发生氧化,产生明显的放热峰,之后硅羟基Si—OH之间发生缩聚反应,使600℃热处理后气凝胶中Si—O—Si网络骨架强度有所提高。未处理的纤维增强气凝胶材料试样上气凝胶纳米颗粒构成的块体较为良好地包裹在玻璃纤维表面,而经过600℃的高温热处理1 h后,块体气凝胶脱离了光滑的纤维表面,气凝胶纳米粒子发生收缩,致使材料比表面积下降。     

深圳市综合水质指数研究及其在水资源资产评估上的应用

自然资源资产评估技术是开展自然资源资产负债表实践和实行环境责任离任审计的重要技术支撑。水资源作为一项重要自然资源,如何有效评估水资源资产是不可回避的问题。论文以深圳市为研究区域,一是采用综合污染指数法和主成分分析法,以总氮、氨氮、总磷、化学需氧量、生化需氧量、固体悬浮物为指标参数构建了深圳市综合水质指数以评价水资源综合水质。二是以该综合水质评估模型为基础,通过采用治污成本法分析综合水质与治污成本间的关系,从而构建深圳市景观水和饮用水资源的价值量评估模型。论文还以深圳市大鹏新区为试点开展了水资源价值量评估,评估结果显示,2015年大鹏新区景观水和饮用水资源的价值量分别为3.60亿、0.35亿元。     

气候变化和人类活动对武江流域年径流及最大日流量影响的定量分析

针对气候变化与人类活动对流域年径流及最大日流量变化影响的定量识别问题,以华南湿润区武江流域为例,分别采用HIMS（Hydro-Informatic Modeling System）模型和敏感性系数法,从日和年尺度定量模拟和评估气候变化与人类活动对流域年最大日流量和径流变化的影响过程及贡献率。结果表明：HIMS模型在武江流域适用性良好,日尺度模型率定期和验证期的纳西效率系数分别为0.85和0.77,水量平衡误差绝对值分别为3.1%和3.3%;两种方法均表明气候变化是引起流域年径流量增加的主要因素,人类活动导致了流域径流量的减少,但贡献率较小。气候变化与人类活动导致了流域年最大日流量的增加,气候变化对年最大日流量增加的贡献率为94%,而人类活动的贡献率则为6%。相较于年均径流量,气候变化对年最大日流量的影响更为显著。     

基于高精度清单的京津冀机动车控污政策研究

为研究京津冀机动车污染控制政策对CO、HC、NO_x、PM_2.5、PM₁₀等污染物的减排效果,建立了2014年高精度机动车排放清单,选取过去已经实施,未来规划实施及优化/劣化后的若干政策,设置4类共13种政策情景,与实际清单基准情景进行对比,识别各政策情景的排放变化,并对其中由政府给予补贴的政策进行成本收益核算.结果显示,淘汰低排放标准机动车带来的污染减排效果最好,在天津和河北对CO和HC的排放削减分别为53.19%,49.75%和51.28%,50.87%,达半数及以上;升级机动车发动机和燃油标准也能显著削减排放,在天津和河北对PM_2.5、PM₁₀的削减分别为17.01%,17.00%和21.95%,21.93%.政府补贴政策存在明显边际效应特征,排放标准高,重污染车少的北京单位成本的减排收益明显低于天津和河北,.河北和天津在考虑成本因素的基础上,应当逐步采纳北京的高标准减排政策;北京则可在一定条件下,将一部分低效的政府补贴通过合理方式转移支付给天津和河北,以提高政府投入的减排效率.     

邻苯二甲酸二丁酯降解过程的单体同位素分析

研究对比了邻苯二甲酸二丁酯（DBP）在不同降解过程（水解、UV/H₂O₂光解、直接光解、过硫酸钾光氧化）中的碳、氢同位素组成变化、分馏特征及二维同位素（Δδ²H-Δδ¹³C）的相关性.水解反应中DBP分子产生了显著的碳同位素分馏,未发现氢同位素分馏,而且碳同位素富集因子ε_C为（-2.7±0.4）‰,表明DBP水解时发生C-O键断裂,氢原子不参与反应.而UV/H₂O₂光解和直接光解反应（pH值分别为2、7和10）中,DBP分子呈现了相似的二维同位素相关性Λ值[（9±2）~（11±2）],推测经历了相同的反应过程.过硫酸钾光氧化降解时,明显偏大的Λ值（31±3）说明反应可能发生C-H键断裂.结果表明：二维单体同位素分析（2D-CSIA）技术可以有效区分DBP的水解、光解、光氧化3种不同类型的降解过程,有助于分析其降解路径.     

天津大气稳定度和逆温特征对PM2.5污染的影响

利用气象铁塔资料分析了逆温频率和强度,采用温差-风速法计算了天津地区大气稳定度,探讨了其相互关系及对PM_2.5浓度月均值和超标日的影响,并对一次重污染过程中大气稳定度和逆温分布特征进行了分析.结果表明,2015年9月~2017年8月A,B,C,D,E和F类大气稳定度发生频率依次为6.7%,11.4%,22.4%,46.1%,11.1%和2.2%,秋冬季节稳定类天气（E,F类）较多,全年白天各时段均以不稳定类大气为主,夜间大气稳定度以中性为主,秋冬季夜间稳定类高达30%~40%.观测期内冬季逆温频率最高,5：00~8：00和21：00~23：00超过90%,冬季逆温强度也最高.随着稳定类大气层结日数的增多,PM_2.5月均值和污染日数均有所增大,同时逐月PM_2.5均值、污染日发生频率均与逆温发生频率呈正相关关系.2016年12月16~21日的一次重污染天气过程显示,PM_2.5受到大气稳定度和逆温发展的影响,霾形成、雾-霾交替和消散等阶段大气稳定度和逆温特征具有显著的不同.大气持续趋于稳定及逆温强度的逐渐增大,对污染生成和维持起了非常重要的作用,污染过程中大气稳定度和逆温特征的精细化分析有助于提升重污染天气预报预警水平.     

考虑边界条件不确定性的地下水污染风险分析

为分析边界条件不确定性对地下水污染质运移数值模拟模型输出结果的影响,运用Monte Carlo方法对一算例进行阐明,并从污染风险预报方面对模拟结果进行分析.为减少重复调用模拟模型产生的大量计算负荷,将边界条件（第一类边界条件-水头值）作为随机变量,建立地下水污染质运移数值模拟模型的Kriging替代模型,在保证较高精度的同时,实现了Monte Carlo模拟.结果表明：边界条件的不确定性,对地下水污染质运移数值模拟模型预报的结果有很大影响,考虑与未考虑边界条件不确定性得到的研究区污染羽分布差别较大.对地下水污染质运移数值模拟模型的Monte Carlo模拟结果进行统计与分析,可以评估研究区观测井1,2,3污染物浓度预报结果的可靠程度,并且可以预报出研究区观测井1,2,3遭受不同程度污染的风险.     

应用S-T模型对沉积物中PAHs的生态风险分级评价

本文构建S-T模型,运用集对分析理论（set pair analysis）构建基本模型,采用层次分析法并参考毒性当量因子确定各指标权重,应用三角模糊数（triangular fuzzy number）对差异度系数进行改进,基于加拿大沉积物环境质量标准,对沉积物中多环芳烃进行生态风险分级评价.结果表明,该模型考虑到化合物之间的相互作用因素并做模糊处理,对差异度系数进行改进体现沉积物中多环芳烃生态风险等级标准的模糊性,为持久性有机污染物生态风险分级评价提供了一种简便客观有效的方法.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

Relationship between PM10 and PM2.5 levels in high-traffic area determined using path analysis and linear regression

The objective of this study was to determine the relationship between PM_(10) and PM_(2.5) levels as related to meteorological conditions and traffic flow using both a linear regression analysis and a path analysis. The Particulate matter(PM) samples were collected from Sukhumvit road, Bangkok, Thailand, at both open(104 samples) and covered(92 samples)areas along the road. Fifteen percent of all samples were separated before the statistical models were run and used for model validation. The results from the path analysis were more elaborate than those from the linear regression, thus indicating that meteorological conditions had a direct effect on the particulate levels and that the effects of traffic flow were more variable in open areas. The model also indicated that meteorological conditions had an indirect effect and that traffic flow had a direct effect on particulate levels in covered areas. The model validation results indicated that for open areas, the R~2 values were not very different between the path analysis and the linear regression model, but that the path analysis was more accurate than the linear regression model at very low PM concentrations. At high PM concentrations, the path analysis model also had a better fit than did the linear regression, so the predictions from the path analysis model were more accurate than those from the linear regression.