Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

Emissions of SO2, NO and N2O in a circulating fluidized bed combustor during co-firing coal and biomass

This paper presents the experimental investigations of the emissions of SO2, NO and N2O in a bench scale circulating fluidized bed combustor for coal combustion and co-firing coal and biomass. The thermal capacity of the combustor is 30 kW. The setup is electrically heated during startup. The influence of the excess air, the degree of the air staging, the biomass share and the feeding position of the fuels on the emissions of SO2, NO and N2O were studied. The results showed that an increase in the biomass shares resulted in an increase of the CO concentration in the flue gas, probably due to the high volatile content of the biomass. In co-firing, the emission of SO2 increased with increasing biomass share slightly, however, non-linear increase relationship between SO2 emission and fuel sulfur content was observed. Air staging significantly decreased the NO emission without raising the SO2 level. Although the change of the fuel feeding position from riser to downer resulted in a decrease in the NO emission level, no obvious change was observed for the SO2 level. Taking the coal feeding position R as a reference, the relative NO emission could significantly decrease during co-firing coal and biomass when feeding fuel at position D and keeping the first stage stoichiometry greater than 0.95. The possible mechanisms of the sulfur and nitrogen chemistry at these conditions were discussed and the ways of simultaneous reduction of SO2, NO and N2O were proposed.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

三峡库区悬移质泥沙对磷污染物的吸附解吸特性

就三峡库区悬移质泥沙对磷污染物的吸附解吸特性从野外同步监测和室内试验研究两个方面展开研究。选取长江干流、嘉陵江和乌江共7个监测断面于2002年和2003进行野外同步监测,测试结果表明：水中的悬移质泥沙对水中各种覆存形态的磷污染物浓度具有显著影响,单位重量泥沙对磷的吸附量与水体总泥沙含量、泥沙粒径有密切关系。采集寸滩断面泥沙对磷酸盐吸附解吸特性进行室内试验研究,并根据Langmuir吸附动力学方程对吸附解吸过程进行了拟合,发现吸附速率常数k随着泥沙粒径的增加而呈递增变化,而磷酸盐初始浓度对k值的影响并不明显,同时,磷酸盐解吸量随着泥沙浓度的增加和粒径的增加呈递减变化,k值随着泥沙粒径的增加而呈递增变化,泥沙浓度对k值的影响不明显。     

焦作市高新区冬季大气不同粒径颗粒物质量特征分析

用大流量冲击式分级采样器采集大气颗粒物样品,通过重量法求出不同粒径颗粒物的质量,研究不同粒径颗粒物的质量百分比.分析不同粒径颗粒物与风速、温度、湿度等气象条件的变化规律.结果表明:各级颗粒物整体与温度和风速呈负相关性,与湿度呈正相关性,且粒径小于2.1 μm的颗粒物与湿度相关性最大.大气颗粒物主要集中在2.1 μm以下...     

型煤产业发展与提高

本文论述发展工业型煤产业的重要意义和技术质量保证,洁净煤技术是控制污染和节约能源,提高煤炭资源利用率的重要技术项目,将粉煤生产成型煤,为工业、民用提供洁净的燃料,既充分利用煤炭资源同时改善能源结构,又有显著的环保效益,国家把煤炭产业列入中国洁净煤技术有限发展项目,目前制约型煤产业的发展要造气型和燃烧型煤并举,同时有利于用户的节能效益。     

葫芦岛市工业源二氧化硫普查结果分析与对策

通过对葫芦岛市工业源二氧化硫普查结果全面系统分析,阐明了各区域、行业、企业的二氧化硫产生、排放及分布特点,指出了葫芦岛地区工业源二氧化硫存在的主要问题,提出了具体的对策措施。     

Expression of sulfur uptake assimilation-related genes in response to cadmium, bensulfuron-methyl and their co-contamination in rice roots

The responses of sulfur （S） uptake assimilation-related genes＇ expression in roots of two rice cultivars to cadmium （Cd）, bensulfuron-methyl （BSM） and their co-contamination （Cd＋BSM） were investigated by gene-chip microarray analysis and quantitative real-time PCR （QRT-PCR） technology. Treatments of Cd and Cd＋BSM induced expression of sulfate transporter and permease genes, and promoted sulfate uptake in rice roots. Cd＋BSM could alleviate Cd toxicity to cv. Fengmeizhan seedlings, probably due to Cd＋BSM promoting greater S absorption by seedlings. Cd and Cd＋BSM induced expression of sulfate assimilation-related genes, and thus activated the sulfur assimilation pathway. Cd and Cd＋BSM induced expression of phytochelatin synthase and metallothionein genes, and induced expression of glutathione S-transferases （GSTs）, glutathione synthase （GS） and S- containing antioxidation enzyme genes, which detoxified Cd2＋. It is suggested that （to cope with the toxicity of Cd, BSM and their co-contamination） the S uptake and assimilation pathway was activated in rice roots by increased expression of related genes, thus enhancing the supply of organic S for synthesis of Cd or BSM resistance-related substances.     

Beyond hypoxia：Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms(hypoxia and an offensive odor) are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration(close to 0 mg/L), low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe2+and∑S2-were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.