粤港澳大湾区NO2污染的时空特征及影响因素分析

利用Aura卫星搭载的臭氧观测仪（OMI）反演的对流层NO₂柱密度数据,分析了自2005年以来粤港澳大湾区（GBA）对流层NO₂柱密度的空间分布特征、时间变化趋势及其影响因素.研究结果表明GBA对流层NO₂柱密度从2005~2018年呈减少的趋势,每年递减约为2.8%.小波系数显示时间演化过程中存在9个月的主振荡周期,冬季浓度较高,夏季较低.人为排放和各种自然因素,导致了GBA对流层NO₂柱浓度月变化在时间和空间上存在明显差异,最小值和最大值分别出现在6和12月,多年平均值分别为3.9665×10¹⁵和12.3423×10¹⁵molec/cm².NO₂在空间分布上呈现明显的空间分异特征,冬季12月最明显.NO₂污染严重的高值区主要出现在中部地区,如广州市、佛山市和中山市,最大的对流层NO₂柱密度可达18.8306×10¹⁵molec/cm²,大约是周边地区的3 倍,且高污染区域向四周逐渐扩散,连成一片.低值区主要在北部的肇庆市和东部的惠州市,多年平均的对流层NO₂柱密度约为7.1400×10¹⁵molec/cm².对流层NO₂柱密度的增长率在不同区域的变化趋势呈现明显的差异,变化范围为-15×10¹⁵~6×10¹⁵molec/cm²,增长率百分比范围为-65%~65%.出现增长的地区主要是肇庆市北部和惠州市东部的低值区;对流层NO₂出现明显减少的区域集中在中部的高值区,减少量最大的地区为广州市、佛山市和中山市交界处.     

滆湖水华初期浮游植物群落特征及与水环境因子相关性分析

为探究滆湖水华初期浮游植物群落特征及与水环境因子的相关性,于2018年5—7月在全湖布设22个点,调查研究滆湖水华初期浮游植物群落时空分布特征,并对引起水华主导环境因子进行分析.结果表明：①共获得7门119属,优势属为绿藻门的小球藻与球团藻、蓝藻门的鞘丝藻与微囊藻,其中湖心区域浮游植物丰度与多样性小,均匀性低,属于中偏重污染区域;湖北区以北属于中污染区域,蓝藻堆积严重;西部沿岸及南端区域属于中偏轻污染区域.②冗余分析得出,湖心藻类与水温（T）有强相关性,与叶绿素a（Chl-a）、溶解性总磷（DTP）、pH、溶解氧（DO）呈一定正相关性;湖北区以北藻类与底泥有机质（OM）、水体悬浮物（SS）、Chl-a及DTP呈强相关性,与T呈一定相关性.T与多项环境因子相关,均值从26.1℃上升到32.4℃;OM与有机磷（OP）呈高度相关性（p<0.05,r=0.892）.水华发生的主导环境因子为T、DTP与pH,底泥OM及OP有一定影响.     

南京市饮用水源地抗生素污染特征及风险评估

采用固相萃取-液相色谱-串联质谱技术（SPE-HPLC-MS/MS）,对南京市饮用水源地抗生素含量及分布特征进行了分析.结果表明,17个采样点总浓度为0.56~1994.96 ng·L^-1,共检出5种大环内酯类、13种磺胺类、3种四环素类、8种喹诺酮类抗生素,平均浓度为0.30~37.07 ng·L^-1,其中检出浓度最高的抗生素为环丙沙星（CIP）,浓度为317.60 ng·L^-1,检出率最高的抗生素为克林霉素（CLI）,检出率为88.24%.与国内部分河流相比,南京市饮用水源地水体中大环内酯类、四环素类、喹诺酮类抗生素残留浓度处于较高水平.生态风险评估结果表明,点位S7具有最高的联合风险熵值（24.58）,氧氟沙星（OFX）的风险熵值最高,达到13.06;健康风险评估结果表明,9种抗生素对人体健康的风险熵Q_H为1.70×10^-3~9.47,强力霉素（DOX）、诺氟沙星（NOR）、恩诺沙星（ERX）、CIP和OFX对大部分年龄段的人体健康具有高水平风险.     

基于AIS轨迹修复的船舶排放空间表征改进方法与应用

基于船舶自动识别系统（Automatic Identification System,AIS）数据表征船舶排放是目前船舶排放空间表征的主流方法,但AIS船舶轨迹点缺失会造成船舶排放量低估和船舶空间分布表征错误,进而影响船舶排放控制区的划分.为改进船舶排放空间表征,本研究以2013年广东省AIS船舶数据为例,采用基于时间和经纬度的三次样条方法对AIS船舶轨迹进行修复,结合动力法计算船舶排放,分析对比AIS轨迹修复前后船舶排放表征的差异,并利用空气质量模型和卫星观测评估AIS轨迹修复对船舶排放表征和广东沿海空气质量模拟的改进效果.结果表明：轨迹修复后广东省海域船舶轨迹点总数由4685773个增至5746664个,船舶NO_x排放量增加了0.6%.对于轨迹点与排放缺失集中的粤东海域,轨迹修复后船舶轨迹点数增加了88%,NO_x排放量在广东省船舶排放量的占比提升至22%,特别是在粤东重点修复海域NO_x排放量增加了2.7倍.原始轨迹在广东省海域较为稀疏,在粤东海域有明显轨迹缺失;轨迹修复后广东省海域船舶轨迹更为密集,粤东海域船舶轨迹得以补充,船舶排放空间分布更连贯.对比模拟结果与卫星观测结果,轨迹修复后粤东重点修复海域船舶模拟浓度与观测浓度的偏差由51%减至6%,总体上船舶排放模拟结果更接近卫星观测结果.     

滇黔桂岩溶区河漫滩土壤重金属含量、来源及潜在生态风险

利用全国地球化学基准计划在滇黔桂岩溶区35个点位采集的70件河漫滩表、深层土壤样品,分析了As、Cd、Cr、Cu、Hg、Ni、Pb和Zn 8种重金属元素含量特征,探究了重金属来源、污染状况及潜在生态风险.结果表明,8种重金属元素含量大部分均高于全国土壤背景值,在滇东南地区含量最高,桂西北地区最低.表层土壤Cd、Hg明显富集,As、Cr、Cu、Ni与深层土壤含量相当;As、Cd、Hg、Pb、Zn在农田、菜地中明显高于深层土壤,Cr、Cu和Ni在各类土地中与深层土壤相当.因子分析结果显示,表层土壤中Cd、Cr、Cu、Ni受地质背景控制,As、Pb、Zn既与地质背景有关,也受人为活动影响,Hg受人为活动影响较严重;深层土壤中Cd、Cr、Cu、Ni、Cr、Zn继承了区域母岩特征,As、Hg和Pb受地质背景和人为活动双重影响.地累积指数法和富集因子法污染评价结果表明,研究区河漫滩表层土壤中Cd、Hg污染较重,As、Cr、Cu、Ni、Pb、Zn大部分为轻度污染或无污染.各重金属潜在生态风险指数高低顺序依次为Hg > Cd > As > Cu > Ni > Pb > Cr > Zn,Cd和Hg的生态风险指数之和占综合指数的82.43%,生态风险最高;滇东南地区重金属潜在风险综合指数最高,具重度生态风险.     

苯醌对聚合硅酸铁多相UV-Fenton体系的增效机制

通过构建苯醌增效聚合硅酸铁多相UV-Fenton体系,讨论了体系中橙Ⅱ的脱色和降解途径.在研究苯醌浓度对聚合硅酸铁铁离子的释放、Fe²⁺与Fe³⁺之间的转化、H₂O₂分解和·OH生成影响的基础上,提出了苯醌对聚合硅酸铁多相UV-Fenton体系的增效机制.结果表明,随苯醌浓度的增加,其紫外光下光解还原聚合硅酸铁并释放Fe²⁺的程度增大、H₂O₂分解速度加快、产生·OH浓度峰值增高且出现的时间提前;苯醌增效体系释放于溶液中的Fe²⁺可以通过Fenton反应转化成Fe³⁺,反应结束后聚合硅酸铁能重新吸附Fe³⁺并使其浓度降低,避免了增效体系铁离子的二次污染.本研究将为多相催化剂催化过程的调控提供新的视角,为多相光助-芬顿反应在有机废水资源化中的应用提供理论依据和技术支持.     

DOC+CDPF对国III重型柴油货车实际道路排放的影响

利用便携式车载排放测试系统（PEMS）对2辆加装氧化催化转化器（DOC）和催化型柴油颗粒捕集器（CDPF）与否的国III重型柴油货车进行实际道路排放测试.结果表明,2辆改造重型柴油车的CO、THC、固态颗粒物粒数（SPN）和黑碳（BC）实际道路排放因子分别为（1.31±0.37）g/（kW×h）、（0.20±0.03） g/（kW×h）、（7.13×10¹⁰±5.27×10¹⁰）个/（kW×h）和（0.69±0.06）mg/（kW×h）,相对于原始排放（拆除DOC+CDPF）分别降低52.48%、55.69%、99.91%和99.22%.从低速、中速到高速,CO和THC减排比例呈现上升趋势,然而运行工况对SPN和BC减排比例则无显著影响.加装DOC+CDPF会导致NO₂在NO_x中的占比升高,且从低速、中速到高速涨幅依次增大,但对NO_x无明显减排效益,其排放因子为9.53~9.83g/（kW×h）,远高于实验室排放限值.     

2018年春节期间京津冀地区污染过程分析

为了解2018年春节期间京津冀地区空气污染情况,利用近地面污染物浓度数据、激光雷达组网观测数据,结合WRF气象要素、颗粒物输送通量和HYSPLIT气团轨迹综合分析污染过程.结果表明,春节期间出现3次污染过程.春节前一次污染过程,各站点PM_2.5浓度均未超过200μg/m³;除夕夜,廊坊站点PM_2.5峰值浓度达到504μg/m³,是清洁天气的26倍;年初二~初五,各站点PM_2.5始终高于120μg/m³,且污染主要聚集在500m高度以下,北京地区存在高空传输,800m处最大输送通量达939μg/（m³·s）,此次重污染过程为一次典型的区域累积和传输过程.京津冀地区处于严格管控状态时,燃放烟花爆竹期间PM_2.5峰值浓度可达无燃放时PM_2.5峰值的3.2倍.为防止春节期间重污染现象的发生,需对静稳天气下燃放烟花炮竹采取预防对策.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

An investigation of changes in water quality throughout the drinking water production/distribution chain using toxicological and fluorescence analyses

Changes in water quality from source water to finished water and tap water at two conventional drinking water treatment plants(DWTPs) were monitored.Beside the routine water quality testing,Caenorhabditis elegans-based toxicity assays and the fluorescence excitation–emission matrices technique were also applied.Both DWTPs supplied drinking water that met government standards.Under current test conditions,both the investigated finished water and tap water samples exhibited stronger lethal,genotoxic and reprotoxic potential than the relative source water sample,and the tap water sample was more lethal but tended to be less genotoxic than the corresponding finished water sample.Meanwhile,the nearly complete removal of tryptophan-like substances and newly generated tyrosine-like substances were observed after the treatment of drinking water,and humic-like substances were identified in the tap water.Based on these findings,toxic pollutants,including genotoxic/reproductive toxicants,are produced in the drinking water treatment and/or distribution processes.Moreover,further studies are needed to clarify the potentially important roles of tyrosine-like and humic-like substances in mediating drinking water toxicity and to identify the potential sources of these contaminants.Additionally,tryptophan-like fluorescence may be adopted as a useful parameter to monitor the treatment performance of DWTPs.Our observations provided insights into the importance of utilizing biotoxicity assays and fluorescence spectroscopy as tools to complement the routine evaluation of drinking water.