基于生命周期评价的风力发电机碳足迹分析

本文以我国市场占用率最高的2 MW双馈式风力发电机为研究对象,采用生命周期评价(LCA)方法,核算其全生命周期过程的碳足迹和总能量需求,分析风力发电机不同生命周期阶段的环境影响,识别其减碳潜力.研究结果表明,风力发电机生产阶段、运输阶段、运行阶段和废弃处理处置阶段的碳足迹(以CO2-eq计,下同)分别为1701 t、61 t、255 t和-325 t;各生命周期阶段的总能量需求分别为10413 GJ、701 GJ、1561.95 GJ和-1081 GJ.风力发电机的碳足迹和总能量需求主要来源于生产阶段,废弃处理处置阶段材料的回收利用有效的降低了生命周期的碳足迹和总能量需求.生产阶段的碳足迹和总能量需求分别占全生命周期碳足迹和总能量需求的101%和90%;废弃处置阶段对碳足迹和总能量需求的贡献为-19%和-10%.每1k Wh风力发电的碳足迹和总能量需求分别为20.7 g和0.14 MJ,风力发电机的能量回收期为0.79年.敏感性分析表明,风力发电机的质量和废弃处置阶段的金属回收率都是风力发电机总能量需求和碳足迹的影响因素.     

火力发电厂汽轮机的安全评价

介绍了火力发电厂设备中的汽轮机的本体结构, 以及汽轮机的安全评价内容.针对汽轮机的本身特点和安全评价内容,提出了两种安全评价方法对汽轮机进行安全评价.     

600 MW机组低压转子叶片裂纹分析

针对某台600 MW亚临界参数汽轮机低压转子的末三级叶片(2Cr12NiMo1W1V钢)出汽侧裂纹进行了宏观形貌观察、化学成分分析、金相组织分析、室温冲击韧性试验、硬度试验，并对断口进行了扫描电镜及能谱分析。结果表明：此次开裂的低压转子叶片，是由于其化学成分Mo元素含量低于标准要求，导致材料的KISCC降低，以及硬度偏低造成裂纹扩展所需的外界启动应力降低，进而在运行过程中拉应力和湿蒸汽的氧化腐蚀共同作用下，发生了应力腐蚀开裂。     

海洋环境下燃气轮机涡轮叶片的热腐蚀与防护

涡轮叶片热腐蚀是海洋环境工作下的燃气轮机的典型故障之一,也是决定涡轮叶片使用寿命的主要限制因素之一.简要分析了我国沿海地区海洋环境的特点以及涡轮叶片热腐蚀的特点,讨论了燃气轮机涡轮叶片的热腐蚀机理和影响因素,结果表明叶片表面温度、燃气中的盐含量以及燃油中的硫与钒是导致热腐蚀的重要因素.最后,着重从选材、涂层应用和维护等...     

Control Issues in the Design of a Gas Turbine Cycle for CO2 Capture

This article is concerned with control issues related to the design of a semi-closed O ₂/CO ₂ gas turbine cycle for CO ₂ capture. Some control strategies and their interaction with the process design are discussed. One control structure is implemented on a dynamic simulation model using a predictive controller, and simulations assess the performance and compare its merits with a conventional PI structure. The results indicate that it can be advantageous for operability to allow a varying (as opposed to fixed) compressor inlet pressure, at the cost of a more expensive design. Furthermore, the results show that a predictive controller has some advantages with respect to the simpler conventional PI control structure, in particular in terms of constraint handling.     

Feasibility analysis of renewable hybrid energy supply options for Masirah Island

In this paper, the assessment and modelling of alternative renewable energy systems for Masirah Island is considered. The hybrid system that is simulated comprises various combinations of wind turbines and/or photovoltaic (PV) supplemented with diesel generators and short-term battery storage. It was found from the analysis that the PV–wind–diesel hybrid system, with battery unit, has the lowest cost values as compared to solar-only or wind–diesel hybrid systems. Furthermore, the study illustrates that for a given hybrid system the presence of battery storage will reduce diesel consumption. The decrease in carbon emission, the percentage of fuel savings, the cost of energy production and the effect of wind and PV penetration are also addressed in this paper. The PV–wind–diesel hybrid option is techno-economically viable for the electrification of the Masirah Island.     

Intelligent power supply management of an autonomous hybrid energy generator

ABSTRACT

This work deals with the optimization of an hybrid energy system used to supply an isolated site. The proposed system combines a wind turbine, a photovoltaic panel, a diesel generator and a battery bank to electrify atypical home. An energy cost-effectiveness approach is adopted in accordance with meteorological data, time profile of energy consumption, and the cost of different alternative systems. A variety of performances is obtained through simulations within the Homer Pro environment. The selection of an optimal combination is based on the maximum integration of renewable energy in the suggested system with a minimum of gas emission. According to the obtained results, the overall cost of the selected installation is about 72,900 €, with 0.415€ the unit cost of a kWh electric energy provided with a contribution of renewable energy of around 86%. Simulations show a technical and financial benefits of the different configurations obtained to supply the target site. To control the proposed hybrid energy system, a supervision algorithm is developed and implemented on TMS320F28027 DSP platform. The proposed energy system aims to take advantages of renewable energy sources and shift to conventional sources only when necessary in order to ensure source autonomy and service continuity.     

加工误差对压气机叶栅气动性能的影响

目的 研究不同区域加工误差对叶片气动性能的影响。方法 选用轴流压气机出口级静叶叶中截面,以叶型厚度变化和中弧线变化为特征,分别在叶型前缘、最大厚度和尾缘区域添加加工误差,采用数值模拟方法,对比设计叶型气动性能,研究叶型各区域几何偏差对性能的影响。结果 叶型前缘几何偏差对气动性能的影响最大,偏差造成的中弧线偏移对性能变化起主导作用。尾缘区域几何偏差对性能的影响趋势与前缘区域完全相反。考虑叶型整体偏差时,轮廓度正偏差造成的性能恶化更加显著。结论 所得的几何偏差影响规律可为实际叶片加工过程中工艺的制定和超差审理提供数据支持。     

某新型航空发动机压气机叶片服役环境适应性研究初探

目的 开展某新型航空发动机压气机叶片服役环境适应性研究,探究压气机叶片服役环境下的耐蚀性及腐蚀萌生周期.方法 采用电化学工作站,开展压气机材料典型环境下标准三电极电化学试验,获取腐蚀电流.结合机场环境谱与当量折算法,利用计算得到的当量折算系数,对机场环境谱进行当量折算,编制模拟该型发动机后续服役环境的仿真加速腐蚀试验环境谱.依据该环境谱,开展压气机叶片试件仿真加速腐蚀试验.结果 在模拟服役环境下的第8个当量腐蚀年限时,新型航空发动机压气机叶片开始出现局部点蚀.随着腐蚀年限的延长,腐蚀损伤程度逐渐加重.结论 在服役环境下,新型航空发动机压气机叶片具有良好的环境适应性,能够满足6～8 a首翻期内的环境适应性要求.     

风电机舱内典型混合液态油品热诱导燃烧特性

为探究不同尺寸方形油盘对双馈异步风力发电机组机舱中典型混合油品燃烧特性的影响,自主设计和搭建了热平板诱导油品加热燃烧测定实验系统。将液压油(CALTEXRANDO HDZ32)和齿轮箱油(CALTEXMEROPA320)按1∶1质量(各40.0g)比例均匀混合后,盛装于横截面尺寸分别为6.5cm×6.5cm、10.0cm×10.0cm、13.5cm×13.5cm 的钢制油盘中,利用热平板加热和诱导盘内同样质量混合油品燃烧,利用摄像机记录其燃烧行为和阶段节点时间,利用热电偶树、温度采集模块对油品燃烧对应阶段节点液内和上方火焰中心轴温度分布进行测定。观察发现,液/齿混合油品在加热后出现液内流动、蒸发、冒泡、气化、燃烧、发烟、火焰蹿高等典型传热传质和液相燃烧现象。实验结果表明,随油盘横截面尺寸递增,混合油品着火时间依次缩短(最高1048.0s),燃烧持续时间依次递减(最高1980.0s),燃烧液内最高温度依次升高(最高564.3 ℃),中心轴第一层火焰熄灭温度依次升高(最高489.2 ℃)。小尺寸油盘内油品交流换热过程缓慢,质量损失速率较低,着火前阶段出现最大质量损失速率(0.041g/s);中大尺寸油盘内对流、传质和传热过程明显增强,质量损失速率较高,火焰蹿高节点时出现最大质量损失速率(0.25g/s和0.29g/s)