基于总磷的长湖水环境容量核算

在对长湖流域水资源状况、水质现状、水文条件调查的基础上,根据水质目标的要求,利用纳污水体的概率型水环境容量模型,对基于总磷的长湖水环境容量进行了核算。结果表明：长湖的水环境容量是动态变化的,而模型的选取和参数的取值对概率型水环境容量的计算非常关键。通过计算分析得到长湖磷的概率水环境容量为：19％丰水期：41．9t／a-45．9t／a;49％平水期：31．8t／a～41．9Va;32％枯水期：11．8t／a～31．8t／a。     

集约农区不同土地利用方式对土壤养分状况的影响

选择山东省寿光市,通过野外调查和室内分析,利用数理统计软件SPSS,系统分析不同土地利用方式下土壤养分的分布特征、变异情况及其相关性,研究集约农区不同土地利用方式对土壤养分状况的影响。结果表明,在不同土地利用方式下,各养分含量分布存在明显规律。有机质均值的分布特征是菜地水浇地果园旱地盐碱地;全氮、碱解氮、速效钾、速效磷和有效锌均值的分布特征是菜地果园水浇地盐碱地旱地;土壤pH值、交换性镁均值的分布特征为盐碱地旱地水浇地果园菜地;交换性钙在不同利用方式中的含量为盐碱地旱地水浇地菜地果园;有效硼为果园菜地盐碱地水浇地旱地;有效铁为菜地果园水浇地旱地盐碱地;有效铜和有效锰均为果园菜地水浇地盐碱地旱地。水浇地、菜地和果园在各养分含量上差异较小,旱地和盐碱地在各养分含量上较为相似。除pH值外,其它12种土壤养分在不同土地利用方式下变异系数均较高,其中以速效磷的变异系数最大。土壤养分中除了交换性镁、有效硼与其它各养分之间的相关性较低外,其它养分之间基本为显著或极显著相关,其中pH值与其它各土壤养分均呈现显著或极显著负相关,有机质与其它各土壤养分均呈现显著或极显著正相关。     

Characteristics of contaminants in water and sediment of a constructed wetland treating piggery wastewater effluent

Constructed wetland (CW) is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus (59%) and residual phosphorus (32%) suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

Characteristics of contaminants in water and sediment of a constructed wetland treating piggery wastewater e uent

Constructed wetland (CW) is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary e uent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater e uent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus (59%) and residual phosphorus (32%) suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.     

An in-depth analysis of self-reported cycling injuries in single and multiparty bicycle crashes in Denmark

Introduction: Cycling is one of the main forms of transportation in Denmark. However, while the number of traffic crash fatalities in the country has decreased over the past decade, the frequency of cyclists killed or seriously injured has increased. The high rate of serious injuries and fatalities associated with cycling emphasizes the increasing need for mitigating the severity of such crashes. Method: This study conducted an in-depth analysis of cyclist injury severity resulting from single and multiparty bicycle-involved crashes. Detailed information was collected using self-reporting data undertaken in Denmark for a 12-month period between 1 November 2012 and 31 October 2013. Separate multilevel logistic (MLL) regression models were applied to estimate cyclist injury severity for single and multiparty crashes. The goodness-of-fit measures favored the MLL models over the standard logistic models, capturing the intercorrelation among bicycle crashes that occurred in the same geographical area. Results: The results also showed that single bicycle-involved crashes resulted in more serious outcomes when compared to multiparty crashes. For both single and multiparty bicycle crash categories, non-urban areas were associated with more serious injury outcomes. For the single crashes, wet surface condition, autumn and summer seasons, evening and night periods, non-adverse weather conditions, cyclists aged between 45 and 64 years, male sex, riding for the purpose of work or educational activities, and bicycles with light turned-off were associated with severe injuries. For the multiparty crashes, intersections, bicycle paths, non-winter season, not being employed or retired, lower personal car ownership, and race bicycles were directly related to severe injury consequences. Practical Applications: The findings of this study demonstrated that the best way to promote cycling safety is the combination of improving the design and maintenance of cycling facilities, encouraging safe cycling behavior, and intensifying enforcement efforts.     

Injury severity analysis of rollover crashes for passenger cars and light trucks considering temporal stability: A random parameters logit approach with heterogeneity in mean and variance

Problem: The rollover crash is a serious crash type that often causes higher injury severities. Moreover, factors that contribute to the injury severities of rollover crashes may show instabilities in different vehicle types and time periods, which requires further investigations. This study utilizes the rollover crash data in North Carolina from Highway Safety Information System (HSIS) to study the effect instabilities of factors in vehicle type and time periods in rollover crashes. Methods: The injury severities of drivers are estimated using the random parameters logit (RPL) model with heterogeneity in means and variances. Available factors in HSIS have been categorized into three groups, which are drivers, road, and environment, respectively. This study also justifies the segmentations through transferability tests. The effects of identified significant factors are evaluated using marginal effects. Results: Factors such as FWP (farm, wood, and pasture areas), unhealthy physical condition, impaired physical condition, road adverse, and so forth have shown instabilities in marginal effects among vehicle types and time periods. Practical Applications: The finding of this research could provide important references for policy makers and automobile manufactures to help mitigate the injury severity of rollover crashes.     

废弃液晶屏玻璃基板的行星式球磨工艺研究

以废弃液晶屏玻璃基板为原料,研究了球磨方式和球磨时间在球磨过程中对粉料粒径分布的影响。通过对废弃液晶屏玻璃基板的行星式球磨工艺的研究,探讨了球磨方式、球磨时间等因素对球磨效果的影响,以建立玻璃粉体细化的合理球磨方式和工艺参数。     

钢铁窑炉烟尘PM_(2.5)控制技术与装备

简述了国家863课题"钢铁窑炉烟尘PM_(2.5)控制技术与装备"的目的、意义和研究成果,介绍了细颗粒物预荷电技术、基于海岛纤维的表面超细过滤材料、预荷电袋滤器、"一阀多喷"清灰等技术的最新进展,通过示范工程的成功运行,验证了成果的先进性和实用性。研究成果将为工业窑炉烟尘细颗粒物深度净化提供技术和装备支撑,适用于新建除尘项目和除尘项目改造。     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.