优势菌种对餐厨垃圾高温好氧消化的促进

为研究优势菌种对餐厨垃圾高温好氧消化(TAD)的促进作用,本研究通过淀粉水解、油脂降解及明胶液化等生化实验,从餐厨垃圾中筛选出若干对其主要成分具有显著降解效果的优势菌种。通过对样品水溶性TOC(TOCw)、水溶性凯氏氮(KNw)、水溶性C/N(KNw)、pH以及含水率等指标的分析,考察优势菌种对餐厨TAD的促进作用。研究表明,优势菌种制剂最优添加量为1%。在此剂量下,好氧消化60 h,TOCw由8.53%降低为2.49%,C/Nw由18.71降低至6.14,以上指标说明加入优势菌种可加速TAD反应。添加量1%样本的水溶性凯氏氮和pH在反应48 h后开始回升,而未添加生物制剂的样本相关参数回升时间需96 h以上,由此推断优势菌种对TAD的促进机制是加快了蛋白质等大分子有机物的降解速度。     

生物滴滤塔处理氯苯废气的工艺性能

将活性污泥培养及驯化后接种于生物滴滤塔中，挂膜启动后处理模拟氯苯废气（简称氯苯废气），考察了生物滴滤塔在挂膜启动阶段及稳定运行阶段的性能。实验结果表明：接种41 d后生物滴滤塔成功挂膜，此时氯苯去除率稳定在90%以上；生物滴滤塔稳定运行阶段，随着进气中氯苯质量浓度由303.82 mg/m³逐渐增至1 489.05 mg/m³，氯苯去除率从85.1%降至70.1%。处理氯苯废气适宜的工艺条件为：空塔停留时间超过45 s，喷淋液流量31.8 mL/min，氯苯负荷23.97~128.01 g/（m³·h）。生物滴滤塔对喷淋液的酸性环境有较好的适应性，喷淋液pH的变化对氯苯去除率无显著影响。     

Emergency shutdown of fluidized bed reaction systems

With several industrial applications of fluidized bed technology recently commercialized worldwide, it becomes essential to develop safe operation methods for fluidized bed reaction systems (FBRSs) to prevent any influence on their process values, which lead to accidents. To preventing any disaster or malfunction in an FBRS, an emergency shutdown system (ESD) is initiated, closing the reaction system in case of any abnormality by effectively isolating the flammable gas. However, an ESD is also prone to the “inactivation problem,” in which in the case of failure it initiates the emergency shutdown, even when the operating conditions of the reaction system are abnormal. It is also vulnerable to a “malfunction problem,” where the emergency shutdown is performed even when the operating conditions of the reaction system are normal. In this study, these problems were solved by investigating a reaction system through the monitoring of appropriate parameters and setting up of trigger levels, which reflect the uniqueness of an FBRS using an ESD. The parameters were identified by analyzing the scenario leading to an accident. The trigger levels were determined as the points at which the loss is smaller in the presence of an ESD, as compared to the value of the loss function in the presence or absence of an ESD. Furthermore, the ESD design model was applied as a case study in the ammoxidation process of propylene. The results showed that an ESD can prevent an approximately 8 billion yen of loss due to accidents in plant operations, against an investment of 200 million yen.     

Application of 1D and 2D MFR reactor technology for the isolation of insecticidal and anti-microbial properties from pyrolysis bio-oils

Valuable chemicals can be separated from agricultural residues by chemical or thermochemical processes. The application of pyrolysis has already been demonstrated as an efficient means to produce a liquid with a high concentration of desired product. The objective of this study was to apply an insect and microorganism bioassay-guided approach to separate and isolate pesticidal compounds from bio-oil produced through biomass pyrolysis. Tobacco leaf (Nicotianata bacum), tomato plant (Solanum lycopersicum), and spent coffee (Coffea arabica) grounds were pyrolyzed at 10°C/min from ambient to 565°C using the mechanically fluidized reactor (MFR). With one-dimensional (1D) MFR pyrolysis, the composition of the product vapors varied as the reactor temperature was raised allowing for the selection of the temperature range that corresponds to vapors with a high concentration of pesticidal properties. Further product separation was performed in a fractional condensation train, or 2D MFR pyrolysis, thus allowing for the separation of vapor components according to their condensation temperature. The 300–400°C tobacco and tomato bio-oil cuts from the 1D MFR showed the highest insecticidal and anti-microbial activity compared to the other bio-oil cuts. The 300–350 and 350–400°C bio-oil cuts produced by 2D MFR had the highest insecticidal activity when the bio-oil was collected from the 210°C condenser. The tobacco and tomato bio-oil had similar insecticidal activity (LC₅₀ of 2.1 and 2.2 mg/mL) when the bio-oil was collected in the 210°C condenser from the 300–350°C reactor temperature gases. The 2D MFR does concentrate the pesticidal products compared to the 1D MFR and thus can reduce the need for further separation steps such as solvent extraction.     

污水处理移动床生物膜反应器悬浮载体研究进展

介绍了移动床生物膜反应器(MBBR)中悬浮载体的种类和特性,讨论了对其性能的影响因素,总结了当前悬浮载体改性技术及性能评价的方法,并对后续研究提出了建议。     

甲苯对UASB反应器中溶解性微生物产物的影响

以乙酸钠为外加碳源,考察了UASB反应器内甲苯对可溶性微生物产物（SMP）的影响。实验结果表明：低质量浓度（20~70 mg/L）的甲苯对微生物有刺激作用,使得污泥增殖速率变小,SMP的质量浓度也逐渐减少,经过一段时间的驯化后,系统COD和TOC的去除率分别达到93%和94%以上,下降趋势较小；较高质量浓度（70~200 mg/L）的甲苯对微生物有抑制作用,污泥活性下降,反应器运行状况开始恶化,SMP的质量浓度也逐渐增大,经过一段时间的驯化后,系统COD和TOC的去除率分别维持在81%和83%以上；当甲苯质量浓度超过200 mg/L时,表现为污泥活性严重下降,对COD的去除效果极差。     

共代谢膜生物反应器法处理二甲基亚砜废水

采用蔗糖作为共代谢基质与一体式好氧膜生物反应器（MBR）工艺相结合处理二甲基亚砜（DMSO）废水。考察了装置的污泥驯化效果、DMSO去除率、污泥的性能、HRT和冲击负荷对DMSO去除率的影响。试验结果表明：驯化第29天，DMSO去除率达98.5%，表明MBR内的污泥已驯化成功；在MBR运行的正式期，当DMSO处于高负荷状态时，DMSO去除率较低；随蔗糖加入量的增加，DMSO去除率逐渐提高，最终恢复到DMSO高负荷冲击前的DMSO去除效果；正常运行时，装置进水ρ（DMSO）=257~1 448 mg/L（平均值为718 mg/L）、出水ρ（DMSO）=6~22 mg/L（平均值为7 mg/L），DMSO去除率为96.4%~99.6%（平均值为98.9%）；在MBR运行的正式期，污泥体积指数小于100 mL/g，表明污泥的沉降性能较好，MLVSS/MLSS较高，表明污泥的活性高，MBR内MLSS的平均值为5.52 g/L，MLVSS的平均值为4.78 g/L；MBR适宜的HRT为12 h。     

好氧颗粒污泥同时脱氮除磷技术研究

采用序批式活性污泥法(SBR)处理新疆油田公司准东石油基地污水,作为生物膜的一种特殊形式,介绍了该工艺的优点,在适宜的运行条件下进行实验。讨论了好氧颗粒污泥脱氮以及除磷的过程,分析了该工艺对氮、磷的去除率及好氧颗粒污泥在好氧、缺氧条件下的吸磷情况,当进水氨氮、磷和乙酸碳浓度分别为38.2 mg/L、27.7 mg/L和134.6 mg/L,MLSS和MLVSS分别为7.0 mg/L、6.4 mg/L时,氨氮、总无机氮、磷、乙酸碳的平均去除率分别达到98.8%、90.2%、98.9%、97.2%.     

厌氧膨胀床处理低浓度污水的污泥颗粒和生物活性变化

污泥的聚集形态和活性，是影响厌氧反应器处理效率的关键因素。通过对厌氧膨胀床反应器（anaerobicex—pandedblanketreactor，AEBR）处理低浓度城镇污水在启动和稳定运行期的污泥活性研究，AEBR在启动运行期内，接种颗粒污泥为适应低浓度基质条件，污泥粒径经历从大变小，再重新颗粒化粒径变大的过程。在运行期第103天，粒径小于1000μm污泥的体积比达到44．7％，平均粒径为952μm，到运行期第173天，粒径小于1000μm污泥的体积比降为28％，平均粒径达1179μm，污泥重新颗粒化完成。颗粒污泥适应新的环境后，单位重量污泥的最大比产甲烷活性（specificmetha．nogensisactivity，SMA）值和胞外聚合物含量增加，分别达到112mLCH4／（gVSS·d）和215mg／gVSS。在处理实际城镇污水的AEBR反应器内，辅酶F420含量可以有效指示污泥样品的产甲烷活性，AEBR反应器不同高度位置的污泥活性不一样，反应器底部污泥活性低于中上部区域污泥的活性。     

膜生物反应器中生物膜的生长特性

实验采用经甲苯培养驯化而成的单一假单胞菌菌种,通过分析平板式生物膜反应器内,不同阶段假单胞细菌生物膜干重、厚度、活性生物量和生物种群分布的变化,研究生物膜特性与降解效率之间的关系。实验结果表明,在挂膜初期生物膜迅速生长,生物量以及生物膜干重增长很快,有利于甲苯及营养物质的传输,降解效率也快速提升。随着生物膜的生长,生物量及干重也逐步增加,厚度逐渐增加使传质阻力不断增大,生物膜上层微生物的有机底物供应不足,使生物膜上层结构稀疏,最终维持一个甲苯的总传输量与生化降解量的平衡,生物量的生长与衰亡也达到动态平衡,形成了一个较高且稳定的降解效率。