TiO2/g-C3N4在泡沫陶瓷表面的负载及光催化空气净化性能增强

以市售P25(TiO_2)和g-C_3N_4为原料,以多孔氧化铝泡沫陶瓷为载体,进行了负载型光催化组件的设计与环境应用.运用浸渍提拉-热处理法制备负载P25/g-C_3N_4的泡沫陶瓷组件,对其微结构进行了表征测试,并将其应用于空气中NO的去除.结果表明,P25/g-C_3N_4在氧化铝泡沫陶瓷表面负载牢固,P25/g-C_3N_4禁带结构匹配有利于光生电荷的分离.研究了P25/g-C_3N_4比例对光催化性能的影响,当g-C_3N_4占P25的量为30%时,负载组件的光催化性能最佳,对NO的去除率达到79.6%.在5次循环反应后,负载型光催化剂表现出良好的稳定性.本研究为P25/g-C_3N_4复合光催化剂的空气净化应用提供了思路和技术基础.     

同源地人工湖水体和底泥中有机物组成及有机结构的分析研究

采用XAD-8大孔吸附树脂对水体和底泥中的有机物进行组分分离,并通过傅里叶变换红外光谱(FTIR)、紫外-可见光谱(UV-Vis)和三维荧光光谱(3DEEMs)对自然水体和底泥中的疏水酸(腐殖酸、富里酸)、疏水碱、疏水中性物质和亲水物质进行表征和对比.结果表明,水体中有机物含量:亲水物质富里酸腐殖酸疏水碱疏水中性物质,底泥中有机物的含量为:腐殖酸富里酸亲水物质疏水碱疏水中性物质.根据红外、紫外、三维荧光光谱可知底泥中有机物的芳香程度、不饱和程度及分子量大小略高于水体有机物.根据荧光指数(FI)和自生源指标(BIX)可知,底泥和水体的腐殖酸和富里酸主要来源于陆生动植物和土壤有机质,而其余物质主要源于细菌和藻类活动.     

电子束辐照降解水中氯霉素的研究

本研究对氯霉素(CAP)在不同条件下的电子束辐照降解进行了研究.结果表明,电子束辐照可有效去除水中CAP,低浓度CAP在酸性条件下的辐照降解更为显著,且降解过程符合准一级动力学模型.通过添加不同的自由基清除剂,发现HO·在CAP降解中起关键作用,此外,CAP分子也会吸收辐照而发生分解.水中共存的阴离子和腐殖酸(HA)对CAP辐照降解均有抑制作用,这跟其与HO·的反应速率常数大小有关,并且反应速率越大,其抑制能力越强.CAP在去离子水中的去除率高于其他实际水体,但辐照剂量为4 k Gy时,污水厂污水过滤水和胶体浓缩液中的CAP也可分别去除89.1%和81.7%.利用GC-MS检测到辐照后溶液中有6种中间产物,主要是通过脱水、不对称中心断键和脱酰胺作用形成.此外,IC检测有Cl-、NO-3和NO-2的产生,并且TOC在一定程度上降低,说明部分CAP被矿化.     

超声辐射浸渍法制备Fe-Ni-Mn/Al_2O_3催化剂及性能研究

以Al2O3为载体,分别采用超声辐射浸渍法和普通浸渍方法制备Fe-Ni-Mn/Al2O3催化剂。采用BET、XRD和SEM对催化剂的理化性质和孔结构进行了分析,以模拟酸性绿B废水为研究对象考察催化剂的催化性能。实验结果表明,浸渍溶液pH值和焙烧温度显著影响催化剂的性能。与普通浸渍法相比,超声浸渍法制备的Fe-Ni-Mn/Al2O3催化剂对酸性绿B脱色反应表现出较高的催化活性。     

氮掺杂TiO2可见光光催化剂的制备及性能

以尿素和钛酸丁酯为原料,通过溶胶-凝胶法低温下制备了高可见光催化活性的氮掺杂TiO2(NDT)光催化剂,采用XRD、TEM、BET和UV-Vis DRS等测试手段对其进行了表征,并在自制光催化反应器中降解甲基橙评价了样品的光催化活性。结果表明,当氮与钛的摩尔比为0.5∶1时,350℃焙烧的样品(NDT350)具有最佳的可见光光谱吸收和光催化活性,该催化剂为锐钛矿晶相,平均粒径为21 nm,比表面积为89.13 m2/g。可见光辐照下,NDT350降解甲基橙的表观反应速率常数为1.381×10-2min-1,是商业P25催化剂的16.85倍。NDT350优良的可见光催化活性与其大的比表面积和强烈的可见光光谱吸收有关。     

某退役后辐照装置的辐射水平监测与评价

依据国家相关标准对某退役后辐照装置周围的辐射水平进行监测与评价,通过数据评价得出该单位辐照装置退役场所未受到放射性污染,其退役后对环境的辐射影响可以忽略。     

A new photoproduct of the drug furosemide in aqueous media

The solar phototransformation of furosemide has been investigated in aqueous media. Irradiation of the drug in distilled water, in water and humic acids or nitrate ions, and in sewage sludge water affords a new dehalogenated dimer. The formation of the dimer has been explained by the formation of a cation radical intermediate. The low-measured environmental concentration of furosemide with respect to predicted environmental concentration in the Po and Lambro Rivers could be justified by its phototransformation.     

PRODUCTION PROCESSES UNDER THE ICE IN LAKE ST. CLAIR: 1. IRRADIATION AND TEMPERATURE1

ABSTRACT: Data from three ice-covered stations in Lake St. Clair were collected to evaluate the effect of ice and related variables on phytoplankton production. Primary production, phytoplankton standing crop, irradiation and temperature were measured from January to April, 1973. Mean production values ranged from 0.74 mgC/m³/h at station 1 near Mitchell Bay to 3.4 mgC/m³/h in waters at stations 2 and 3 below the Thames River mouth. A similar pattern was observed in chlorophyll a concentration, the mean values ranged from 0.63 μg/1 at station 1 to 2.1 and 1.3 μg/1 at stations 2 and 3. Temperature stratification occurred at the three stations. However, the temperatures at station 1 were consistently more than a degree warmer than at the other two stations. Irradiation was low, having a mean value at the sampling depth of .075 ly/min. The data is interpreted to indicate that the ice-bound phytoplankton were adapted to the low irradiation. It is suggested that the variation observed between stations is related to the formation of a plume by the Thames River and differences in nutrient loads carried by the St. Clair and Thames Rivers.     

BiOCl/TiO_2复合材料的可见光活性及机理研究

采用水热法和溶胶凝胶法制备新型BiOCl/TiO2复合材料并明确了最优的掺杂比例(2%).随后利用X射线衍射(XRD)、紫外可见漫反射(DRS)、透射电镜(TEM)和X射线光电子能谱(XPS)对该材料进行表征.由于禁带宽度较大,纯BiOCl和TiO2的可见光催化性能极差,然而二者复合后,同条件下的苯降解率却大幅提升,可以达到40%以上.经证实,催化剂制备过程中,Bi的状态发生变化,在TiO2导、价带之间插入新的能级,使其禁带宽度变窄,电子可以实现可见光跃迁.     

Synthesis, crystal structure, photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c= 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^-1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2- and NO₃^-, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography- mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.