钙基脱硫剂孔隙网络动态生成特性

钙基脱硫剂孔隙结构特性直接影响到脱硫效果及脱硫剂的利用率,对其空间网络特性的描述将有助于分析SO2的扩散及反应特性. 在石灰石分解动力学和烧结机理的基础上,结合固体分解的成核机理,运用Monte-Carlo 方法,建立了脱硫剂孔隙网络的动态生成模型,对钙基脱硫剂分解形成的孔隙结构进行了动态模拟,并对生成孔结构的分形特性进行研究.结果表明,运用动态生成模型,可以给出石灰石分解形成的CaO内部孔隙的微观空间结构,且模拟生成的孔隙网络的分形维数与实验测定值基本吻合.     

An experimental study on the influence of zeolite on changes of pH and alkalinity in anaerobic treatment of compost leachate

With the increase of urbanization, municipal solid waste has also increased. Therefore, the need for solid waste management is also increasing compared with earlier decades. Composting is a good option for the recycling of solid waste; however, it produces leachate, which requires proper treatment systems to prevent environmental degradation. Due to high chemical oxygen demand (COD) concentrations in compost leachate, anaerobic treatment is the best option for handling the effluent, and an anaerobic baffled reactor (ABR) is one such anaerobic reactor that can be used for its treatment. Because of high ammonia and heavy metal concentrations, as well as the possibility of sludge washout in ABRs, it is important to use proper media, such as zeolite, which can reduce inhibition effects and sludge washout from the reactor. Anaerobic treatment, especially during the methanogenesis phase, is sensitive, and pH and alkalinity are parameters that influence the treatment. Therefore, adjusting these parameters within a normal range is very important to the proper functioning of anaerobic systems. In this study, a pilot‐scale ABR was used, and the last 4 of the 8 ABR compartments were filled with zeolite. The bioreactor was operated at hydraulic retention times (HRT) of 3, 4, and 5 days, with zeolite filling ratios of 10%, 20%, and 30%, and influent COD concentrations of 10,000, 20,000, and 30,000 milligrams per liter (mg/L). In this study, pH value was 6.43 ± 0.1, 6.96 ± 0.3, and 6.96 ± 0.25 at filling ratios of 10%, 20%, and 30%, respectively. According to the results, in all filling ratios, no significant changes were observed in the pH value when the organic loading rate increased and its amount was within a constant range. Influent alkalinity was equal to 2015 ± 510, 2884 ± 505, and 4154 ± 233 milligrams of calcium carbonate per liter (mg CaCO₃/L) at influent COD concentrations of 10,000, 20,000, and 30,000 mg/L, respectively, and in effluent, they were 2536 ± 336, 3379 ± 639, and 4377 ± 325 mg CaCO₃/L, respectively. The amount of alkalinity in the effluent increased compared with the alkalinity in the influent. The results show that the amount of alkalinity in the influent and effluent was similar, and the alkalinity enhancement was lower when the filling ratio was increased from 10% to 20%, and 20% to 30%. Comparisons of the results from zeolite with and without biofilm showed that, in cases of zeolite with biofilm, the amounts of silica and oxygen decreased and the amount of carbon increased, and it showed the formation of biofilm on the surface of zeolite. In addition, the absence of sodium in the zeolite with the biofilm indicated that sodium was exchanged with ammonium ions. According to the results, zeolite can be used in anaerobic reactors as a medium, and it also reduces fluctuations in pH and alkalinity at different organic loading rates, providing a normal range for anaerobic treatment.     

地下水原位修复渗透性反应墙反应介质的改良与展望

渗透性反应墙(PRBs)是倍受关注的地下水原位修复技术之一,具有高效廉价、安装简便、维护简单等优点。详细总结了零价铁、活性炭、无机矿物材料和生物质材料等PRBs反应介质的结构、性能、适用范围、改良方法及增强吸附机制,介绍了PRBs技术在国内外地下水原位修复领域的工程应用实例,指出研发可再生型反应介质、深入研究复杂体系的污染物去除主导机制以及开展多介质混合、多种原位修复技术集成应用研究将是今后PRBs的主要研究方向。     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

填料型A2/O工艺污水处理及反硝化除磷效能

填料型A~2/O工艺是在A~2/O工艺的基础上通过向厌氧池、缺氧池、好氧池中投加醛化纤维式组合填料,将传统活性污泥法与生物膜法相结合组成一套脱氮除磷的新系统,文章对填料型A~2/O工艺与传统A~2/O工艺处理生活污水的效果进行了对比研究,以及对该复合式工艺在不同硝化液回流比下反硝化除磷能力进行了分析.研究结果表明,相同条件下,填料型A~2/O工艺对生活污水的处理效果要优于传统A~2/O工艺,分别使COD和氨氮的去除率达到92.5%和93.1%.试验通过增加硝化液回流比的措施使得反硝化聚磷菌在填料上富集程度增大,当硝化液回流比为300%时,缺氧池的NO-3-N浓度为3.03 mg·L~(-1),吸磷量最大为26.28 mg·L~(-1),胞内聚合物PHB代谢活性最好,利用率最高为1.32 g·g~(-1)·L~(-1).体现了填料型A~2/O工艺具有显著的反硝化除磷效果.     

低渗透性多孔介质室内弥散实验及弥散度求解研究

低渗透多孔介质在浅部含隔水层中分布广泛,是地下水污染物迁移的重要载体,然而其弥散度的取值目前研究还不足。针对此问题,以溴化钠为示踪剂开展了低渗透多孔介质的室内弥散实验研究,介质渗透系数为0．048 m/d,通过离子选择电极法测定溴离子浓度,并分别采用解析法和数值法进行了弥散度的求解,解析法和数值法求得的弥散度分别为0．0048 m 与0．0065 m,研究成果可以为低渗透多孔介质中污染物迁移预测提供弥散度值参考。     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

稻壳沸石的合成及其对磷酸盐的吸附/脱附动力学

以稻壳为原料采用煅烧-水热合成法制备了合成沸石,运用XRD和SEM表征了合成沸石的特性,通过静态实验,研究了合成沸石对磷酸盐的吸附和脱附机理。结果表明:12 h后产物发现了Na P沸石的特征峰和亚晶结构,延长水热合成晶化的时间有利于沸石晶核的形成。沸石对磷酸盐的吸附机理符合伪二级模型,实测值与伪二级吸附动力学模型的拟合值相差在1.1%以内。颗粒内扩散速率是由膜扩散和内扩散共同控制,颗粒内扩散速率常数kp随初始浓度的增加而减小。升温有利于磷酸盐的脱附,MNa OH/P>8.0时(MNa OH/P为Na OH物质的量与吸附的磷酸盐物质的量之比),磷酸盐的脱附率可达82.9%。伪二级脱附动力学模型的拟合结果优于伪一级,拟合值与实测值相差在1.7%以内。     

氚在黏土矿物等多孔介质中的滞留机制

通过电感耦合等离子体光谱(ICP)、热重(TG)等分析方法对黏土矿物的结构成分、加热特性等进行了检测;通过蒸馏冷凝等实验,实现了对吸附后黏土矿物的吸附水、层间水、结构水的分离,检测了氚在黏土矿物结构内外各类型水中的分布;通过红外吸收光谱(IR)等分析方法对氚在黏土矿物结构中的吸附位置及形态进行了检测研究;通过同位素效应...     

介质材料在可渗透反应墙中的应用进展

可渗透反应墙正发展成为修复污染地下水技术的新方向,其中介质材料是可渗透反应墙成功修复污染地下水的关键。可渗透反应墙介质材料可以细分为还原型、吸附型、沉淀型和降解型介质材料等四类,并分别从不同类型的介质材料的反应机理、应用情况以及存在的问题等方面加以阐述。可渗透反应墙介质材料的选择应在其反应机理的基础上,结合实际的地下水环境条件、污染源、人类活动和经济费用等加以综合考虑,以保证可渗透反应墙长期有效经济安全地运行。