Degradation of acid fuchsine by a modified electro-Fenton system with magnetic stirring as oxygen supplying

The current modified electro-Fenton system was designed to develop a more convenient and e cient undivided system for practical wastewater treatment. The system adopted a cathode portion that employed magnetic stirring instead of common oxygen gas di usion or gas sparging to supply oxygen gas for the electrolyte solution. Key factors influencing the cathode fabrication and activity were investigated. The degradation of acid fuchsine with a self-made graphite-polytetrafluorethylene cathode was studied using a spectrophotometer. It was found that the cathode generated hydrogen peroxide with high current e ciency and the hydrogen peroxide yield of the cathode did not decay after 10 times reuse. With the Pt anode at a ferrous ion concentration of 0.5 mmol/L, a pH of 3, and using magnetic stirring, dye decolorization could be rapidly accomplished but the destruction of benzene rings and intermediates was fairly di cult. With a Fe anode, dye degradation was more complete.     

Effects of sterilization treatments on the analysis of TOC in water samples

Decomposition experiments conducted with and without microbial processes are commonly used to study the effects of environmental microorganisms on the degradation of organic pollutants.However,the effects of biological pretreatment (sterilization) on organic matter often have a negative impact on such experiments.Based on the principle of water total organic carbon (TOC) analysis,the effects of physical sterilization treatments on determination of TOC and other water quality parameters were investigated.The results revealed that two conventional physical sterilization treatments,autoclaving and 60 Co γ-radiation sterilization,led to the direct decomposition of some organic pollutants,resulting in remarkable errors in the analysis of TOC in water samples.Furthermore,the extent of the errors varied with the intensity and the duration of sterilization treatments.Accordingly,a novel sterilization method for water samples,0.45 μm micro-filtration coupled with ultraviolet radiation (MCUR),was developed in the present study.The results indicated that the MCUR method was capable of exerting a high bactericidal effect on the water sample while significantly decreasing the negative impact on the analysis of TOC and other water quality parameters.Before and after sterilization treatments,the relative errors of TOC determination could be controlled to lower than 3% for water samples with different categories and concentrations of organic pollutants by using MCUR.     

紫外光降解反应器去除氯苯气体模型的建立与应用

从光化学反应过程出发,基于线性光源球面辐射能量分布（LSSE）,以反应器内部空间的辐射能吸收密度、空塔停留时间、进口浓度等为主要参数,建立了气相环境中紫外光化学反应器去除氯苯的数学模型.结果表明,建立的模型能很好地模拟和预测紫外光化学反应器对氯苯气体的去除性能.氯苯气体的紫外光化学反应表现出一级反应动力学的特征.该模型包含了紫外光降解反应器设计的主要参数,同时被用于预测了反应器在不同进口浓度和不同空塔停留时间条件下的出口氯苯浓度,进而获得不同进口浓度达标排放所需要的最小空塔停留时间,为气相污染物的紫外光降解反应器的设计与运行提供了重要的理论指导.     

UV/H2O2工艺降解微囊藻毒素-LR

采用UV/H₂O₂联合工艺,研究了光强、初始浓度、H₂O₂投加量、pH及阴离子对微囊藻毒素-LR (MC-LR)去除率的影响.结果表明,单独H₂O₂对MC-LR基本无去除效果;单独UV工艺可以一定程度上降解MC-LR;而UV/H₂O₂联合工艺由于发生协同作用明显提高降解效率.试验发现,随着光强的增大,MC-LR的去除率不断提高;随着MC-LR初始浓度的增大,其去除率不断降低;随着H₂O₂投加量的增大,降解速率常数逐渐增大,当H₂O₂投加量由1 mmol/L增大到3 mmol/L时,降解速率常数由0.084 4上升到0.166 4;当pH为3.13时,在相同条件下MC-LR的去除效果最好;阴离子的投加不利于MC-LR的降解,其中CO^2-₃、NO^-₃影响最大.     

一种新型石墨电极的制备及其对苯酚的去除

为了探索一种对有机废水处理有效、廉价、来源广泛、环境友好的电极,以石墨、环氧树脂、固化剂和丙酮为原料,研究制备了一种新型石墨电极 (NGE). 分别采用热水浸泡、乙醇溶液回流、丙酮回流、超声-丙酮回流以及电化学法对制备的石墨电极进行预处理,前三者效果较差,超声-丙酮回流可改善处理效果,但不够理想,电化学法可取得满意的效果.苯酚降解的UV光谱分析表明,尽管商品石墨电极 (CGE) 比NGE具有更高的苯酚氧化效率,但其电解液积累大量的苯醌,而NGE电解液中苯醌积累量少,并且电解过程中逐渐降低. NGE比CGE具有更好的TOC去除效果,两者TOC去除率分别为40%和31%. SEM分析结果表明,CGE被严重腐蚀,NGE无明显变化,表现出良好的稳定性.     

二氧化钛催化降解中性红的历程研究

通过监测二氧化钛降解中性红过程中体系pH值的变化,并对体系的UV-VIS光谱进行分析,进而推导出中性红的降解历程,可为降解条件的优化提供依据.     

二氧化锰氧化降解金霉素的动力学研究

研究了金霉素(CTC)在二氧化锰(MnO2)作用下的氧化降解过程,并讨论了初始MnO2浓度、体系pH及温度对降解反应的影响.无MnO2存在时,CTC没有发生降解.但是当体系中存在MnO2时,CTC浓度开始迅速下降,反应后期降解速率逐渐变慢;同时体系中二价锰离子(Mn2+)浓度逐渐升高,表明MnO2可以降解CTC,该过程是一个氧化还原反应.采用草酸溶解MnO2和过滤2种不同的方法终止反应,对比2种方法所得的结果,可以发现该反应过程中,开始阶段降解作用占主导地位,在反应达到平衡后吸附作用才明显.CTC的降解速率随着MnO2初始浓度的增加和体系温度的升高均显著加快.反应体系的pH能强烈影响CTC的氧化降解,降解速率随着pH的升高而明显降低.这是由于CTC随体系pH由3.77升高到7.41时,分别以阳离子、中性形态和阴离子的形式存在;而-δMnO2(pHzpc=2.25)表面在pH3.77的整个范围内均呈现为负电性.因此随pH升高,阴离子形态的CTC逐渐增多,导致其在MnO2表面的吸附作用减弱,从而使降解速率变缓.     

微囊藻毒素-LR的臭氧降解研究

采用不同的臭氧投加量,考察了微囊藻毒素-LR(MC-LR)的降解效果,并通过对臭氧氧化过程中产生的8种主要降解产物的相对分子质量分析,推测其降解途径.结果表明,臭氧氧化降解MC-LR主要通过Adda途径和Mdha途径来完成对MC-LR的降解和脱毒作用.臭氧氧化的Adda途径是通过对MC-LR上Adda侧链的进攻,断开具有活性的Adda支链,而达到脱毒的目的;臭氧氧化的Mdha途径是通过对MCs肽环上面Mdha和Ala的断键,打开环状肽链,使藻毒素失去活性,在整个过程中Adda途径占主导地位.在O3∶MC为6时,MC-LR的去除率最高可达到92%.     

含酚废水处理系统中苯酚降解菌的分离及分离物多样性分析

用富集培养和直接涂平板培养的方法,从含酚废水处理系统的悬浮污泥中分别分离了57株和55株苯酚降解菌.112株分离物经ERIC-PCR指纹图谱分析,共显示了15种差异明显的ERIC-PER指纹图谱,表明至少应有15种不同的菌株.其中直接涂平板法得到的分离物占有11种,富集培养法得到的分离物占4种.将直接涂平板得到的分离物,与来自不同种属苯酚降解菌的LmPH(the largest subunit of multi-component phenol hydroxylase)等位基因分子进行杂交显示,该11种分离物可分为3种以上不同的LmPH代谢类型;而富集培养获得的分离物巾只显示1种LmPH代谢类型.对显示不同ERIC-PCR指纹图的15个代表荫株的生长和苯酚降解效率进行研究发现,其中F-6菌株在苯酚浓度0.4～1.4g·L-1范围内,其苯酚降解效率达到了70%～100%.