储罐硫腐蚀产物标志性气体的监测

含硫油品储罐内的腐蚀产物与油品中的活性硫反应生成硫化物,而此类硫腐蚀产物氧化自燃是导致储油罐发生火灾、爆炸事故的重要原因.通过试验考察了氧气体积比对硫腐蚀产物氧化自燃过程的影响,探索了铁锈模拟物在氧化过程中SO2气体的释放规律.结果表明:氧气浓度越高,硫腐蚀产物的自燃危险性越大;随着O2浓度增加,氧化反应中SO2的浓度越大,SO2气体析出速度越快,当氧化反应的温度为40℃时,SO2气体浓度达到最大.     

典型可燃物燃烧烟尘物化特性差异性研究

开展对典型可燃物燃烧烟尘的物化特性差异性研究,是全面了解烟尘信息的基础.基于可控条件下的燃烧试验,对典型可燃物燃烧烟尘物理特性和化学组分进行了分析.通过对比分析汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘及柴油烟尘和正庚烷烟尘的透射电镜图片,对透射电镜图的紧凑性、复杂性及灰度值进行了深入分析,探讨了燃烧烟尘的物理差异性.利用固相微萃取-气质联用技术(SPME-GC-MS),对汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘化学组分进行了分析和对比.通过燃烧烟尘的特征物质组分的分析,得到3种燃烧烟尘在特征物质的分布和出峰时间等方面的差异性.这些差异性可作为对烟尘来源及燃烧条件等因素判别的依据.     

矾土尾矿载体双活性组分甲苯催化燃烧催化性能研究

利用矾土尾矿制备催化剂载体,采用浸渍法将双活性组分氧化物载于催化剂载体,研究甲苯催化燃烧性能.结果表明,当Cu、Mn物质的量比为1∶2、负载量为14％、焙烧温度为500℃、焙烧2h时CuMn/ZrO2整体催化剂催化活性高,起燃温度为210℃,完全燃烧温度为230℃,有效降低了甲苯催化燃烧的起燃温度和完全燃烧温度.     

Cu–Mn–Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cu–Mn, Cu–Mn–Ce, and Cu–Ce mixed-oxide catalysts were prepared by a citric acid sol–gel method and then characterized by XRD, BET, H₂-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu–Mn–Ce ternary mixed-oxide catalyst with 1:2:4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu–Mn–Ce catalyst, a portion of Cu and Mn species entered into the CeO₂ fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu–Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu–Mn and Cu–Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.     

Serious BTEX pollution in rural area of the North China Plain during winter season

Atmospheric BTEX compounds(benzene, toluene, ethylbenzene and xylenes) in a rural site of the North China Plain(NCP) were preliminarily investigated in winter, and the outdoor concentrations(25.8–236.0 μg/m3) were found to be much higher than those reported in urban regions. The pollution of BTEX inside a farmer's house was even more serious, with combined concentrations of 254.5–1552.9 μg/m3. Based on the ratio of benzene to toluene(1.17 ± 0.34) measured, the serious BTEX pollution in the rural site was mainly ascribed to domestic coal combustion for heating during the winter season. With the enhancement of farmers' incomes in recent years, coal consumption by farmers in the NCP is rapidly increasing to keep their houses warm, and hence the serious air pollution in rural areas of the NCP during winter, including BTEX, should be paid great attention.     

载体酸处理对CuMnCeOx/堇青石微波催化燃烧甲苯性能的影响

针对堇青石载体比表面积小、活性组分分散程度低等问题,本研究使用盐酸对蜂窝状堇青石载体进行酸蚀处理以增大其比表面积.在采用等体积浸渍法制备CuMnCeO_x/酸蚀堇青石催化剂的基础上,开展了微波催化燃烧甲苯试验以考察酸处理对催化剂活性的影响,同时对CuMnCeO_x/堇青石与CuMnCeO_x/酸蚀堇青石催化剂进行BET、SEM、PSDA和XRD等表征测试.结果表明,堇青石载体的比表面积由酸蚀前的0.153 m²·g^-1提高至酸蚀后的1.024m²·g^-1;酸蚀未改变堇青石载体的晶体结构,同时CuMnCeO_x/酸蚀堇青石活性组分的特征峰相较于CuMnCeO_x/堇青石催化剂有所增多.在处理气量为0.12m³·h^-1、甲苯初始浓度为1000 mg·m^-3和床层温度为160℃的反应条件下,CuMnCeO_x/酸蚀堇青石催...     

可燃物化学性质对燃烧释放PM2.5元素成分的影响

通过自主设计的燃烧装置,对云南省6种典型乔木树种的不同器官(枝、叶、皮)室内模拟阴、明燃两种燃烧过程,收集燃烧排放颗粒物(PM_2.5)并测定K、Mg等8种元素排放因子,比较不同燃烧状态释放PM_2.5中元素含量的差异,同时分析各元素排放因子与可燃物自身元素含量之间的相关性.结果表明:可燃物中K、Mg和Ca元素含量较高,范围为(137.74~4670.70) mg/kg,微量元素Mn含量突出;阔叶可燃物元素含量普遍高于针叶,器官间元素含量差异显著;燃烧释放PM_2.5中K、Na元素排放因子较高,范围为(0.4269~4.9321)~(0.6311~3.0856) mg/kg,微量元素Zn较高、Cu最少,范围为(0.0409~0.3670)~(0.0029~0.0458) mg/kg,常量元素高于微量;树种间元素排放因子表现针叶高于阔叶,器官间较可燃物自身差异增大;燃烧状态对排放因子存在影响,常量元素普遍表现为明燃>阴燃,微量元素无明显规律;PM_2.5与可燃物各元素含量比值中,Na元素最高,其余元素占比普遍0~1%范围,微量元素含量比高于常量,针叶高于阔叶;可燃物的化学性质对其排放特性影响显著,可燃物与PM_2.5的元素间相关性较高,相关水平普遍达0.600以上,器官间不同元素相关水平表现为:常量元素普遍高于微量元素,针叶略高于阔叶,叶>皮>枝,明燃高于阴燃.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

板材类生物质燃烧及动力学特性热重研究

采用非等温升温法研究了4种板材类生物质在空气气氛下的燃烧特性和动力学特性。通过对TG、DTG等曲线的分析,发现4种板材燃烧过程均可分成3个阶段,即水分蒸发阶段、挥发份析出(或燃烧)阶段和固定碳燃烧阶段。综合燃烧特性:松木集成材>纤维密度板>夹芯胶合板>刨花板。4种板材均具有良好的燃烧特性。4种生物质燃烧均存在1个吸热峰和2个放热峰,分别与挥发分析出峰、挥发分燃烧、固定碳燃烧对应。采用Fridman法和Fridman-Carroll法分别对4种板材的动力学参数进行了计算,2种方法得出的结果符合较好。分析得出:由于生物质燃烧与环境换热、挥发分析出吸热、固定碳燃烧放热等因素作用,4种生物质的表观活化能高温区均低于低温区。动力学计算结果表明:松木集成材平均表观活化能最低,燃烧反应能较容易进行。     

BiFeO3可见光催化降解甲基紫

采用柠檬酸-硝酸盐燃烧法制备了光催化剂BiFeO₃。采用SEM，XRD，FTIR等技术对光催化剂BiFeO₃进行表征。表征结果显示，光催化剂BiFeO₃晶相纯、粒径小、比表面积大，存在Fe#x02014;O的弯曲振动和伸缩振动。实验结果表明：通过鼓气及加入H₂O₂可有效提高BiFeO₃对甲基紫可见光催化降解的效率；在300mL质量分数为1.5#x000d7;10^-5的甲基紫溶液中加入0.9g光催化剂BiFeO₃和0.1mL质量分数为30%的H₂O₂溶液，当反应时间为240min时，甲基紫去除率可达99%。