油田固体废弃物回注技术的可行性试验

胜利油田临盘采油厂临南油田水质改性后固体废弃物急剧增加、处理难度大,高渗储层回注的处理办法在夏52-414井开展现场试验取得成功.对其他油田的污泥处理具有参考借鉴价值.     

稠油污水生化性处理技术研究

为了探讨稠油污水能否使用生物法处理,以生活污水和农药厂生化池原菌种经过诱导驯化,分别培养了可以在稠油污水中生长的好氧菌种革兰氏阴性菌G-1和厌氧菌种革兰氏阴性菌G-2.以G-2和G-1对稠油污水进行顺序处理,可使其BOD5/CODCr达到0.26;采用SBR法对新疆稠油污水放大处理试验的结果：COD降至150 mg/L以下,各项指标达到GB8978-1998二级排放标准.     

采油厂HSE监督检查管理系统创建实践研究

本文根据采油厂生产过程风险特点,以生产单元为对象,通过建立全员参与的HSE监督检查体系,实现对采油厂HSE监督检查标准的统一规范,利用开发的HSE监督检查信息集成平台,创建完成采油厂HSE监督检查管理系统。在大庆油田第五采油厂的应用实践显示,其能为采油厂带来巨大的风险管理效益,是全面落实直线与属地HSE责任的有效载体。对于采油厂有效实施HSE监督检查具有重大意义,是HSE管理制度的一种创新。     

Material flow analysis of lubricating oil use in California

Petroleum lubricating oils, used throughout the economy, are distinct among petroleum products in their capacity to be recovered and recycled at the end of their useful life. Used lubricating oil is regulated at the state and federal level because of concerns about environmental impacts arising from improper disposal, although rates of recovery are not known. We present a material flow analysis of lubricants through California's economy in the years 2007–2012. We introduce a novel technique for computing aggregate waste generation from a collection of hazardous waste manifest records, and apply it in order to determine a recovery rate for used oil and to estimate the quantity of oil managed informally in the state. The records also offer a detailed view of the fate of used oils after they are recovered. We find that around 62% of lubricants are recoverable at end of life, of which 70–80% is being recovered. This rate shows a slight downward trend. If the trend is accurate, measures should be taken to improve the performance of the used oil management system. Policy opportunities exist to reduce the quantity of oil managed informally through improving access to responsible used oil management methods. These include increasing the collection of used oil from industrial sources as well as “do it yourself” oil changes, expanding in-state reprocessing capacity, and promoting increased out-of-state reprocessing of used oil. Our methods introduce new possibilities to make use of direct observation in material flow analysis, potentially improving data availability and quality and increasing the relevance of material flow methods in policy applications.     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

Co-treatment of fruit and vegetable waste in sludge digesters. An analysis of the relationship among bio-methane generation,process stability and digestate phytotoxicity

The co-digestion of a variable amount of fruit and vegetable waste in a waste mixed sludge digester was investigated using a pilot scale apparatus. The organic loading rate (OLR) was increased from 1.46 kg VS/m³ day to 2.8 kg VS/m³ day. The hydraulic retention time was reduced from 14 days to about 10 days. Specific bio-methane production increased from about 90 NL/kg VS to the maximum value of about 430 NL/kg VS when OLR was increased from 1.46 kg VS/m³ day to 2.1 kg VS/m³ day. A higher OLR caused an excessive reduction in the hydraulic retention time, enhancing microorganism wash out. Process stability evaluated by the total volatile fatty acids concentration (mg/l) to the alkalinity buffer capacity (eq. mg/l CaCO₃) ratio (i.e. FOS/TAC) criterion was <0.1 indicating high stability for OLR <2.46 kg VS/m³ day. For higher OLR, FOS/TAC increased rapidly. Residual phytotoxicty of the digestate evaluated by the germination index (GI) (%) was quite constant for OLR < 2.46 kg VS/m³ day, which is lower than the 60% limit, indicating an acceptable toxicity level for crops. For OLR > 2.46 kg VS/m³ day, GI decreased rapidly. This corresponding trend between FOS/TAC and GI was further investigated by the definition of the GI ratio (GIR) parameter. Comparison between GIR and FOS/TAC suggests that GI could be a suitable criterion for evaluating process stability.     

1株异养硝化-好氧反硝化细菌DK1的分离鉴定及其脱氮特性

从某反应器活性污泥中分离筛选出1株假单胞菌属(Pseudomonas sp.)细菌,命名为DK1,并对该菌进行脱氮特性研究.在以葡萄糖为碳源,C/N量比为5时,分别以NaNO_3和NaNO_2为氮源,二者的好氧反硝化速率为4.09 mg·(L·h)-1和4.43mg·(L·h)~(-1).以二者同时为氮源脱氮率为100%;此外,菌株DK1具有异养硝化性能,NH_4~+-N平均去除速率为2.32mg·(L·h)-1.缺氧时以NO_2~--N为氮源菌株DK1可将一系列梯度浓度NO_2~--N(约100~300 mg·L-1)在36 h内降为0.当NO_3~--N和NO_2~--N同时存在时,菌株DK1会优先利用NO_3~--N进行反硝化.同时该菌株还具有同步硝化反硝化(SND)性能,可同时去除NH_4~+-N、NO_2~--N或NH_4~+-N、NO_3~--N,30 h内脱氮率分别达95.06%和94.69%.相同时间内在NH_4~+-N、NO_2~--N和NO_3~--N三者均存在时,脱氮效果最佳,达100%.菌株DK1的高效SND及反硝化性能表明其在处理含氮废水方面有一定的潜力和应用价值.     

喀斯特常绿与落叶阔叶混交林过去50年来的碳循环模拟

通过对Forest-DNDC模型的植被和土壤参数本地化校准,以气象插值数据为输入,模拟了贵州省普定县高原型喀斯特次生常绿与落叶阔叶混交林1965~2014年的土壤、植被和生态系统碳循环特征。结果表明,与冷模拟和实测值相比,参数本地化校准后的模型能更准确地模拟春、秋、冬3个季节的土壤呼吸动态,而模拟的夏季土壤呼吸偏小;但统计检验指出,参数修订后的Forest-DNDC模型能够较好地模拟喀斯特森林土壤呼吸,降低了模拟误差,可用于喀斯特常绿与落叶阔叶混交林碳动态的模拟。进一步分析发现,1965~2014年喀斯特森林的碳通量除模拟早期的前3~4年急剧增加之外,随后总初级生产力(GPP)保持相对稳定,植物呼吸(Rplant)和生态系统呼吸(R_(ecosystem))随着森林发育而增加,土壤呼吸(R_(soil))减少,植被净初级生产力(NPP)呈迅速减小趋势;净生态系统碳交换量(NEE)亦较迅速下降,在2013年达到最低值-0.17 t C/ha,喀斯特森林由碳汇变为弱碳源。相关分析表明,年均温度和年降水对喀斯特常绿与落叶阔叶混交林的GPP和R_(soil)没有显著影响,但却显著影响NPP、R_(plant)、R_(ecosystem)和NEE。     

变电站污水处理现状与展望

变电站一般位于城市郊区或乡村环境等市政设施尚不完善的区域,无法接入市政污水管网,许多变电站粗放式的污水处理方式无法满足环保要求.随着变电站智能化水平的提高,站内工作人员越来越少,传统的污水处理方式无法适应新形势下变电站内污水处理要求.因此,针对变电站粗放式的污水管理方式及新条件下传统污水处理方式等不满足环保要求的问题,根据站址外环境创新变电站污水处理方式成为关键.通过对变电站既有污水处理方式的研究,结合变电站智能化的发展进程,进行总结,可为变电站污水处理设计或水环境管理提供参考.