城市河道表层水及沉积物中微塑料的污染现状与污染行为

河流是微塑料从陆地向海洋传输的关键路径,在近年来得到了越来越多的研究重视.但实际上,目前关于城市不同区域河道表层水及沉积物中微塑料的污染现状及污染行为研究仍十分有限,相关问题依然不甚清晰.本文以上海市中心城区及郊区城镇区域的8条河道作为研究对象,共采集16个河道表层水及沉积物样品,采用高速摄像仪和傅立叶红外变换光谱仪鉴定样品中微塑料的丰度、尺寸、颜色、形状和类型等特征.结果表明,上海市城市河道表层水中微塑料的平均丰度为(7.5±2.8)个·L~(-1),而沉积物中微塑料的平均丰度(以湿重计)则达到了(1 575.5±758.4)个·kg~(-1).微塑料尺寸越小丰度越高.其中,低于500μm、纤维状、透明色和聚酯类的微塑料始终在上海市城市河道中占据主导地位,但沉积物中的微塑料分布更具多样性.相对于国内外其他城市河道中的微塑料污染,上海市城市河道中的微塑料污染较为严重.不同城市河道中,微塑料的形状和聚合物类型分布受到来源(主要为洗衣废水、个人护理产品和塑料废弃物等)、水动力学条件和本身理化性质等各种因素的较大影响.还进一步讨论了城市河道中微塑料的污染行为(来源、传输与归趋),并解析了各种环境因子对其造成的潜在影响.     

Preparation and characterization of a novel hybrid chelating material for effective adsorption of Cu(Ⅱ) and Pb(Ⅱ)

The discharge of heavy metal ions such as Cu~2+and Pb~2+poses a severe threat to public health and the environment owing to their extreme toxicity and bioaccumulation through food chains Herein, we report a novel organic–inorganic hybrid adsorbent, Al(OH)_3-poly(acrylamide dimethyldiallylammonium chloride)-graft-dithiocarbamate(APD), for rapid and effectiv removal of Cu~2+and Pb~2+. In this adsorbent, the "star-like" structure of Al(OH)3 poly(acrylamide-dimethyldiallylammonium chloride) served as the support of dithiocarbamat(DTC) functional groups for easy access of heavy metal ions and assisted development of larg and compact floccules. The synthesized adsorbent was characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). APD was demonstrated to hav rapid adsorption kinetics with an initial rate of 267.379 and 2569.373 mg/(g·min) as well a superior adsorption capacities of 317.777 and 586.699 mg/g for Cu~2+and Pb~2+respectively. Th adsorption process was spontaneous and endothermic, involving intraparticle diffusion and chemical interaction between heavy metal ions and the functional groups of APD. To assess it versatility and wide applicability, APD was also used in turbid heavy metal wastewater, and performed well in removing suspended particles and heavy metal ions simultaneously through flocculation and chelation. The rapid, convenient and effective adsorption of Cu~2+and Pb~2+give APD great potential for heavy metal decontamination in industrial applications.     

以可生物降解固体为碳源的城市污水厂尾水反硝化脱氮研究

针对城市污水厂尾水氮排放不达标的现象,提出以可生物降解聚合物作为固体碳源的反硝化生物滤池技术。研究结果表明,尾水中氮的去除率会随水力停留时间(HRT)的延长而增加,HRT≤8 h时,去除率增长速度较快;HRT>8 h时,脱氮效率增长趋于平缓。选用聚羟基丁酸戊酸共聚酯(PHBV)为碳源,HRT为8 h时脱氮效果最佳,连续稳定运行30 d,出水硝态氮的去除率达96.1%~97.4%,出水中总氮浓度达GB 3838—2002《地表水环境质量标准》Ⅴ类水标准。     

不同类型清水剂处理油田含聚污水的效果对比

考察了阳离子型CWC-14、非离子型NQS-01和阴离子型AQS-08 3类清水剂对油田含聚污水的处理效果,对比了它们的作用特点和絮体性能。实验结果表明:在清水剂加入量350 mg/L、处理温度65℃、搅拌转速300 r/min、搅拌时间5 min的条件下,CWC-14、NQS-01和AQS-08对含聚污水的除油率分别为98.8%、98.0%和99.4%;NQS-01受处理温度、搅拌条件影响较大;CWC-14受污水中聚合物质量浓度影响最大。清水剂的絮体特点与其作用机理有关,CWC-14的絮凝速率最快,起效时间最短,絮体呈黏性大块状;NQS-01的絮凝速率最慢,起效时间最长,絮体呈浮油状;AQS-08的絮凝速率和起效时间适中,絮体呈松散状、流动性好。对比结果表明,非阳离子型清水剂可有效避免油田含聚污水处理过程中的黏性油泥问题。     

不饱和季铵盐的合成及其聚合物在化工及环保领域的应用

按不饱和基团的类型对不饱和季铵盐进行了分类,并综述了其合成方法。介绍了其聚合物在含油污水处理、抗菌、纺织品、新材料等领域的应用。阐述了在不饱和季铵盐的开发及其聚合物的应用方面存在的问题。指出了今后的发展方向:应该加大科研投入,加快新型不饱和季铵盐的研发进程,特别是在主结构设计、纯度提高以及新型絮凝剂单体的多样性方面,以制备出多功能性的单体和聚合物。     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

含铬钻井泥浆固化及影响因素

固化技术是含铬钻井泥浆无害化处理最有效的方法。以四川西部某钻井泥浆为研究对象，选取水泥、石灰、聚铝和水玻璃作为固化处理剂，运用正交试验研究了含铬钻井泥浆实验条件。最佳试验配方是：先将泥浆含水率调整为46%，水泥、聚铝、石灰和水玻璃的添加量分别为10%、1%、3%和0.5%。固化72 h，该试验配方对六价铬和总铬的固化率分别达到93%和95%，浸出六价铬浓度符合地下水三类水标准(GB/T14848-9)，浸出总铬浓度符合国家污水综合排放标准（GB5085.3-1996）。     

聚合铝混凝过程中pH值的计算与调控

本文通过对混凝过程中典型酸碱平衡体系进行分析，提出了对无机离分子絮凝剂聚合铝（PACl）混凝过程中混凝剂投药量与pH值变化关系进行近似计算的方法，并引入了混凝过程水解度的概念。而后根据实验结果进行了进一步的修正。     

Biodegradability,hydrolytic degradability,and builder performance in detergent formulations of partially dicarboxylated alginic acid

Partially dicarboxylated alginic acids with degree of dicarboxylations from 13 to 61 mol% were prepared and their biodegradability, hydrolytic degradability, and builder performances in detergent formulations were measured. Also, the correlations between biodegradability and hydrolytic degradability were examined with respect to the degree of dicarboxylation. The biodegradability of dicarboxylated alginic acid sodium salt (DCAa), evaluated by biochemical oxygen demand with activated sludge, depended on the degree of dicarboxylation. DCAa containing more than 75 mol% remaining uronide residues in the polymer chain showed excellent biodegradation. Hydrolytic degradation of DCAa depended on the degree of dicarboxylation and the pH of the incubation media. After 30-day incubation at 30°C at pH 4–6, a significant molecular weight reduction by hydrolytic degradation was observed for highly dicarboxylated alginic acid. DCAa with a high degree of dicarboxylation showed excellent builder performance in detergent formulations based on the detergency and calcium sequestration capacity.