Studies on polycyclic aromatic hydrocarbons in two sediment cores from the huaxi reservoir,china: Assessment of levels,sources, and ecological risk

This study investigated the levels, sources and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in two sediment cores that were collected along the Huaxi Reservoir. The spatial distributions and residue levels of the 16 priority PAHs in the sediments from the Huaxi Reservoir were analyzed for their potential ecological risk, source apportionment and contribution to the total PAH residue. The concentration level of the total PAHs (TPAHs) was in the range 1805 ng·g^?1 to 20023 ng·g^?1 based on dry weight, and the content of PAHs in the Huaxi Reservoir exhibited a gradual upward trend. The PAH congener ratios fluoranthene/(fluoranthene + pyrene) and indeno[1, 2, 3-cd]pyrene/(indeno[1, 2, 3-cd]pyrene + benzo[g, h, i]perylene) were used to identify the source. The main source of the low molecular weight PAHs was wood and coal combustion, whereas the high molecular weight PAHs were primarily from petroleum combustion sources. The results of an ecological risk assessment demonstrated that ACE poses a potential ecological risk, while FLU, NAP, ANT, BaP, DBA, PHEN and PYR can have serious ecological risks.     

加速溶剂萃取-固相萃取/超高效液相色谱-串联质谱法测定沉积物中5种微囊藻毒素

建立了加速溶剂萃取-固相萃取/超高效液相色谱-串联质谱法同时测定沉积物中5种微囊藻毒素(MC-LR、MC-RR、MC-LW、MC-LF、MC-YR)的方法。选择甲醇-水(1∶4,V/V)为ASE萃取溶剂,萃取温度和萃取压力分别为80℃和13.1 MPa,固相萃取过程以HLB小柱为萃取柱,采用液相色谱-串联质谱分析。方法在5种微囊藻毒素质量浓度5~100μg/L内线性良好(r0.995),回收率为76.0%~118%,相对标准偏差为1.9%~12.0%,检出限为2~3μg/kg,定量下限为8~12μg/kg。该方法已用于西太湖沉积物的检测,具有较好的方法适用性。     

The Effects of Hypoxia on Sediment Nitrogen Cycling in the Baltic Sea

Primary production in the eutrophic Baltic Sea is limited by nitrogen availability; hence denitrification (natural transformation of nitrate to gaseous N₂) in the sediments is crucial in mitigating the effects of eutrophication. This study shows that dissimilatory nitrate reduction to ammonium (DNRA) process, where nitrogen is not removed but instead recycled in the system, dominates nitrate reduction in low oxygen conditions (O₂ <110 μM), which have been persistent in the central Gulf of Finland during the past decade. The nitrogen removal rates measured in this study show that nitrogen removal has decreased in the Gulf of Finland compared to rates measured in mid-1990s and the decrease is most likely caused by the increased bottom water hypoxia.     

New methodological improvements in the Microtox® solid phase assay

The classic Microtox® solid phase assay (MSPA) based on the inhibition of light production of the marine bacteria recently renamed Aliivibrio fischeri suffers from various bias and interferences, mainly due to physico-chemical characteristics of the tested solid phase. To precisely assess ecotoxicity of sediments, we have developed an alternative method, named Microtox® leachate phase assay (MLPA), in order to measure the action of dissolved pollutants in the aqueous phase. Two hypotheses were formulated to explain the observed difference between MSPA and MLPA results: a real ecotoxicity of the solid phase or the fixation of bacteria to fine particles and/or organic matter. To estimate the latter, flow cytometry analyses were performed with two fluorochromes (known for their ability to stain bacterial DNA), allowing correction of MSPA measurements and generation of new (corrected) IC50. Comparison of results of MLPA with the new IC50 MSPA allows differentiating real ecotoxic and fixation effect in classic MSPA especially for samples with high amount of fines and/or organic matter.     

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Sorption of PAHs and PCBs to activated carbon: coal versus biomass-based quality

The addition of activated carbon (AC) is an increasingly popular method for pollutant immobilization, and the AC material can be made of biomass or coal/fossil feedstock. The aim of the present study was to investigate whether there are differences between pollutant sorption to biomass and coal-based AC in the presence and absence of sediment. Through N₂ and CO₂ adsorption to probe surface area and pore size it was shown that the biomass-based AC had a stronger dominance of narrow pores in the size range 3.5-15 Å than the anthracite-based material. In the absence of sediment, sorption isotherms for the probe compounds pyrene and PCB-101 showed stronger sorption for the biomass-based AC (logarithmic Freundlich coefficients 8.15 for pyrene; 9.91 for PCB-101) than for the anthracite-based one (logarithmic Freundlich coefficients 7.20 and 9.70, respectively). In the presence of sediment, the opposite trend was observed, with the stronger sorption for anthracite-based AC. Thus, the presence of competing and/or pore-blocking sediment constituents reduces sorption to a larger extent for biomass-derived AC (factor of 5 for pyrene to almost 100 for PCB-101) than for anthracite-based AC (no reduction for pyrene to factor of 5 for PCB-101). This difference is tentatively attributed to the difference in pore size distribution, narrow pores being more prone to clogging, and could have implications for remediation feasibility with AC from different sources.     

Responses of Hyalella azteca and phytoplankton to a simulated agricultural runoff event in a managed backwater wetland

We assessed the aqueous toxicity mitigation capacity of a hydrologically managed floodplain wetland following a synthetic runoff event amended with a mixture of sediments, nutrients (nitrogen and phosphorus), and pesticides (atrazine, S-metolachlor, and permethrin) using 48-h Hyalella azteca survival and phytoplankton pigment, chlorophyll a. The runoff event simulated a 1 h, 1.27 cm rainfall event from a 16 ha agricultural field. Water (1 L) was collected every 30 min within the first 4 h, every 4 h until 48 h, and on days 5, 7, 14, 21, and 28 post-amendment at distances of 0, 10, 40, 300 and 500 m from the amendment point for chlorophyll a, suspended sediment, nutrient, and pesticide analyses. H. azteca 48-h laboratory survival was assessed in water collected at each site at 0, 4, 24, 48 h, 5 d and 7 d. Greatest sediment, nutrient, and pesticide concentrations occurred within 3 h of amendment at 0 m, 10 m, 40 m, and 300 m downstream. Sediments and nutrients showed little variation at 500 m whereas pesticides peaked within 48 h but at <15% of upstream peak concentrations. After 28 d, all mixture components were near or below pre-amendment concentrations. H. azteca survival significantly decreased within 48 h of amendment up to 300 m in association with permethrin concentrations. Chlorophyll a decreased within the first 24 h of amendment up to 40 m primarily in conjunction with herbicide concentrations. Variations in chlorophyll a at 300 and 500 m were associated with nutrients. Managed floodplain wetlands can rapidly and effectively trap and process agricultural runoff during moderate rainfall events, mitigating impacts to aquatic invertebrates and algae in receiving aquatic systems.     

Chromium speciation in river sediment pore water contaminated by tannery effluent

Cr(VI) is far more soluble and toxic than Cr(III). Sediment pore water was investigated in a river adjacent to the property of a large former tannery, into which Cr-contaminated effluent was discharged over a 55-year period, and where extremely high Cr concentrations have been found in the sediments. Dialysis cells, or peepers, were used to generate depth profiles of Cr concentration in sediment pore water. Samples were analyzed for total Cr using inductively coupled plasma-mass spectrometry (ICP-MS) and for Cr species using high performance liquid chromatography (HPLC)-ICP-MS. The results show an absence of Cr(VI) in all samples. Furthermore, incomplete recovery of Cr(VI) added to the samples collected at the locations with highest sediment Cr concentrations indicate strong reducing conditions at those locations, which are not conducive to the presence of Cr(VI).     

Recent levels of organochlorine pesticides and polychlorinated biphenyls in sediments of the sewer system in Hanoi, Vietnam

The occurrence, temporal trend, sources and toxicity of PCBs and organochlorine pesticides were investigated in sediment samples from the sewer system of Hanoi City, including the rivers Nhue, To Lich, Lu, Set, Kim Nguu and the Yen So Lake. In general, the concentrations of the pollutants followed the order DDTs > PCBs > HCHs (β-HCH) > HCB. However, the pollution pattern was different for the DDTs and PCBs when the sampling locations were individually evaluated. The concentrations of the DDTs, PCBs, HCHs, and HCB ranged from 4.4 to 1100, 1.3 to 384, <0.2 to 36 and <0.2 to 22 ng/g d.w., respectively. These levels are higher than at any other location in Vietnam. Compared to measurements from 1997, the DDTs, PCBs, β-HCH and HCB levels show an increasing trend with DDT/DDE ratios, indicating very recent inputs into the environment although these persistent compounds are banned in Vietnam since 1995.     

Perfluorochemicals in wastewater treatment plants and sediments in Hong Kong

The study reported in this paper examined the concentrations of nineteen perfluorochemicals (PFCs), including perfluoroalkyl sulfonates, carboxylates, and sulfonamides in samples collected from Hong Kong wastewater treatment plants (WWTPs) and sediments. The study was the first to use an external isolator column to assist in the quantification of PFCs in environmental samples without having to make internal modifications to a liquid chromatography system. Perfluorooctanesulfonate was found to be the dominant PFC pollutant in Hong Kong, and the WWTP sludge was the major sink of PFCs discharged from the urban areas. Compared to discharge influenced by industrial activities, much less perfluorooctanoate was found in waste streams. The significantly lower level of perfluorodecanesulfonate in WWTP sludge reflects the important influence of consumer products on PFC distribution. The dominance of even-chain length perfluoroalkyl carboxylates in all of the WWTP sludge samples investigated further suggests the strong aerobic degradation of fluorotelomer alcohols in WWTPs.