Random walk modeling of wake dispersion for the exhaust tower of an underground tunnel in urban area

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ，ｓｏｍｅｉｎｓｔａｌｌａｔｉｏｎｓｗｉｔｈｓｐｅｃｉａｌｃｏｎｓｔｒｕｃｔｉｏｎｆｏｒｅｘｔｒａｃｔｉｎｇｃｏｎｔａｍｉｎａｎｔｇａｓ，ｓｕｃｈａｓａｎｅｘｈａｕｓｔｔｏｗｅｒｏｆｔｈｅｕｎｄｅｒｇｒｏｕｎｄｔｕｎｎｅｌ，ｅｔｃ．ｗｅｒｅｓｅｔｕｐｉｎｕｒｂａｎａｎｄｉｎｄｕｓｔｒｉａｌｃｏｍｐｌｅｘａｒｅａｓ．Ｔｈｅｅｆｆｅｃｔｓｏｆｔｈｅｓｅｃｏｎｓｔｒｕｃｔｉｏｎｓｏｎｔｈｅｆｌｏｗａｎｄｔｈｅｒｅｂｙｏｎｔｈｅｌｏｃａｌｄｉｓｐｅｒｓｉｏｎｏｆｔ…     

基于GIS的城市大气TSP污染空间分析

利用GIS的空间分析功能 ,对焦作城区大气TSP的污染状况及污染源的内在关系进行了深入的分析 ,通过建立TSP污染类型划分标准和污染动态变化分类系统 ,对城区TSP污染进行了分区评价 ,并进一步对城区大气TSP污染的空间动态转化规律和趋势进行了研究     

中度污染水资源用于电厂循环冷却系统工艺研究

采用曝气生物滤池与高效混凝沉淀工艺对城市污水厂二级处理出水进行了2 m3/h规模的中试研究,并在此基础上对被污染的地表水进行了600m3/h规模的工程试验研究。研究表明,中度污染水资源通过这一工艺处理,可以满足电厂循环冷却水补给水的水质要求,并可以取得较高的处理效率。工程试验证实,此工艺运行稳定,系统易启动,抗冲击能力强,管理方便,具有推广应用的价值。     

装甲钢自然环境试验与人工加速试验的相关性

对某型装甲钢在酸雨大气环境下自然暴露与人工模拟加速试验的相关性进行了研究。利用腐蚀机理对比、Spearman秩相关系数、灰色关联度、加速转换因子等方法进行了相关性的定性定量评价。评价结果表明模拟加速试验与自然环境暴露试验有较好相关性。     

SO2在碳钢初期大气腐蚀中的作用

通过自建的模拟大气腐蚀系统,借助金相显微镜、扫描电镜(SEM/EDX)、X-射线衍射(XRD)和x-射线光电子能谱(XPS),研究了SO2对碳钢初期大气腐蚀行为的影响,并进一步用原子力显微镜从更微观的角度观察了在SO2环境中初期阶段腐蚀形貌变化.研究结果表明:在SO2污染大气环境中,随SO2浓度的升高碳钢腐蚀加快.在体积分数为5×10(-6)SO2的大气环境中,碳钢和耐候钢表面腐蚀主要以条状物生长,随着SO2浓度的升高,腐蚀产物的形貌发生改变,在体积分数为5×10(-5)SO2的大气环境中,条状锈和胞状锈同时生长.在锈层中S元素以FeSO4·4H2O的形式存在,腐蚀产物中还有γ-FeOOH.SO2在初期阶段加速了碳钢的腐蚀,降低了碳钢的耐蚀性.     

MAP法处理氨氮废水最佳条件的研究

MAP法是一种比较新颖有效的处理氨氮的方法，该方法是通过化学沉淀的方式使废水中的氨氢浓度降到很低。而且沉淀反应不受温度、水中毒素的限制。由单项试验以及正交实验的方法对MAP法处理氨氮废水的工艺进行优化研究，结果表明，在pH=8.5，反应时间为3h,Mg:N:P=1:3:1.0:1.1时为较佳反应条件；氨氮的去除率随着反应时间的增加而增加，随着Mg:N比值的增加而增加。     

思茅大气环境与气象条件的关系

对思茅地区大气环境监测数据进行统计、分析,与当地天气气候条件进行对比,探究思茅地区大气污染状况与气象条件之间的关系.     

2A12铝合金在模拟溶液中的周浸腐蚀行为

采用干湿周浸实验、失重法和电化学阻抗谱研究了2A12铝合金在0.6mol/L NaCl和0.6mol/L NaCl 0.02mol/L NaHSO3两种溶液中的腐蚀行为与规律, 利用扫描电镜(SEM)、能谱(EDX)和红外光谱(FTIR) 观察分析腐蚀产物表面形貌、结构和组成,测试了材料的力学性能.研究表明,随腐蚀时间的延长,腐蚀产物不断增多,失重增加,力学性能下降,阻抗模值逐渐减小;腐蚀产物形貌以团状和块状为主,在0.6mol/L NaCl溶液中腐蚀产物主要为铝的氯化物和氧化铝,在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀产物主要为氧化铝、铝的硫酸盐水合物和铝的氯化物;由于NaCl和NaHSO3共同作用,2A12合金在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀电流密度高,阻抗模值相对较小,腐蚀速率较高,腐蚀后失重大,力学性能下降幅度较大,腐蚀更严重.     

酸性高浓度含氟废水处理技术

介绍了对某化工厂排放的酸性高浓度含氟废水进行处理的试验，采用石灰中和沉淀，氯化钙（或聚丙烯酰胺）二级絮凝沉淀，砂滤工艺进行处理，操作控制条件如下：pH为8－9，Ca^2 与F^-的摩尔比为3．0，聚丙烯酰胺投加量为2mg/L，沉淀时间为1h，处理工程运行后的验收监测结果表明，出水中的残氟浓度可以达到国家规定的一级排放标准，且系统运行稳定，工艺简便。     

Chemical Composition and Acidity of Rain at the Gulf of Iskenderun,North-East Mediterranean

The purpose of the present work was to investigate the chemistry of rain in the Gulf of Iskenderun, North East Mediterranean, Turkey. The Gulf region has a large number of industries. Main industries existing in the region are iron and steel works, fertilizer plants, a cement plant, and several medium and mini size steel mills in addition to the international pipe line terminals. This study aims to apportion the local sources contributing to the overall pollution of the region. To this end a precipitation sampling program was started in January 2000, and over 48 precipitation samples were collected from each of 5 stations located at Iskenderun city center, Iskenderun industrial zone, Payas city center, the campus of Iskenderun Technical College and the campus of Mustafa Kemal University. Samples were analysed for pH, NO₃ ⁺, Cl^-. Ca, Al, Ba, Na, Cd, Co, Cr, Cu, Pb, Li, Mg, Mn, Ni, Zn, Fe, K. Concentrations of metal ions were determined by ICP-AES. NO₃ ^- ions and pH were determined by using NO₃ ^- selective electrode and pH meter, respectively.pH values of the collected samples at the industrial zone and at Payas city center, ranged between 5.02 and 7.38, respectively. NO₃ ^- and metal ions concentrations were highly variable. Concentrations of Ca and Fe ions were higher in the industrial zone and Payas city center. In the other three stations, concentrations of metal ions and NO₃ ^- ion were lower than that of industrial zone and the values of pH ranged between 6 and 7.4. The average pH values at Iskenderun Gulf showed that the precipitation was not acidic, because of the high concentration of Ca. The highest concentrations of Na and Cl ions were recorded in the University campus because the campus is located by the Mediterranean Sea.