基于STC12C5410AD的电铃无线控制系统

针对传统电铃采用单一作息时间表进行专线控制的缺点,设计了一种能无线控制、又能同时存储多个作息时间表的电铃控制系统．该系统用无线代替专线,存储有多个时间表,在季节变更时通过控制器自动变换表,解决了传统电铃控制系统中的专线成本高、维修难、季节变换需要人工改表的问题．图5,表2,参4．     

Metallurgical analysis of the ‘cause’ arc beads pattern characteristics under different short-circuit currents

Electric arc beads commonly cause large fire and explosion accidents, especially during the powder process industries. During such fires, the original equipment is often severely burned, rendering electrical fire investigation impossible. Therefore, identifying the beads caused by electrical faults through metallurgical investigation is crucial. This study focused on the ‘cause’ of arc beads and determined their pattern characteristics through metallurgical analysis of copper wires with short-circuit currents of 100, 160, 200, and 240 A. According to microstructure characteristics and metallographic knowledge, bead pattern characteristics were divided into six types: hypereutectic (A), dendritic eutectic (B), chilled layer (C), cellular crystal (D), dendritic (E), and coarse columnar crystal (F). Oxide levels of each category were A (4.5%–7.6%) > C (2.0%–3.8%) > B (1.1%–2.4%) > D (1.0%–2.1%) > E (0.6%–1.9%) > F (0.1%–0.7%). When the short-circuit currents were the same, there were a greater number of small particle beads than large ones. As the current increased, the number of distributed beads with a particle size d < 1 mm decreased, with 1 mm ≤ d < 2 mm increased, and with d ≥ 2 mm were stable. Bead size and distribution had a negative linear correlation at 200 A. When the current increased, the proportion of beads with A and C structures gradually decreased, and those with D structures increased to more than 50%. Oxygen content and arc temperature determined the oxide form. These results are vital for electrical fire investigations and provide theoretical support for fire material evidence extraction and cause identification.     

Ecological principles,biodiversity, and the electric utility industry

The synthetic field of conservation biology uses principles derived from many different disciplines to address biodiversity issues. Many of these principles have come from ecology, and two simple ones that seem to relate to many issues involving the utility industry are: (1) Everything is interconnected (and should usually stay that way), and (2) We can never do merely one thing. The first principle can be applied to both the biotic and physical environments that are impacted by industrial activities. Habitat fragmentation and the loss of physical and biotic connectedness that results are frequently associated with transmission rights-of-way. These problems can be reduced—or even turned into conservation benefits—by careful planning and creative management. The second principle applies to the utility industry's programs to deal with carbon released by burning fossil fuels. Ecological knowledge can allow these programs to contribute to the preservation of biodiversity in addition to addressing a pollution problem. Without careful ecological analyses, industry could easily create new problems while implementing solutions to old ones.     

电除尘器管状芒刺类电晕极电参数模拟计算

推导了不等线径、不等线距圆线组合电除尘器伏安特性计算关系,利用不等线径、不等线距圆线组合对管状芒刺类电晕极作了近似简化处理.采用静电场与电晕电场相叠加的办法建立了管状芒刺类电晕极电场分布的一种计算方法.与实验值对比表明,该方法的计算结果是可靠的.     

低温等离子体联合技术降解甲苯气体的研究

以自制的纳米钛酸钡基介电材料为催化剂,以电工陶瓷拉西环为载体,利用介质阻挡放电产生的低温等离子体对常压下流动态含甲苯的空气进行处理,研究了电场强度、空塔气速、甲苯初始浓度及不同填料情况下甲苯的降解及臭氧产生情况,初步探讨了等离子体联合技术降解甲苯的机制,并进行了产物分析.实验结果表明,甲苯降解率随电场强度的提高而上升,随空塔气速和甲苯初始浓度的增加而降低;随反应器内填料变化,甲苯降解率表现为催化剂填料》普通填料》无填料,其降解率最高可达95%.当电场强度》13.0 kV/cm时,臭氧浓度因受到过量的高能电子攻击而发生分解,表现为臭氧浓度随电场强度的继续增加而降低,故最佳电场强度为13.0 kV/cm.当9.0 kV/cm＜电场强度＜13.0 kV/cm,臭氧产量表现为催化剂填料＞普通填料＞无填料,纳米钛酸钡基介电材料大大增强了臭氧的产量.     

Vehicle emissions of primary air pollutants from 2009 to 2019 and projection for the 14th Five-Year Plan period in Beijing, China

Over the past decade, the emission standards and fuel standards in Beijing have been upgraded twice, and the vehicle structure has been improved by accelerating the elimination of 2.95 million old vehicles. Through the formulation and implementation of these policies, the emissions of carbon monoxide (CO), volatile organic compounds (VOCs), nitrogen oxides (NO_x), and fine particulate matter (PM_2.5) in 2019 were 147.9, 25.3, 43.4, and 0.91 kton in Beijing, respectively. The emission factor method was adopted to better understand the emissions characteristics of primary air pollutants from combustion engine vehicles and to improve pollution control. In combination with the air quality improvement goals and the status of social and economic development during the 14th Five-Year Plan period in Beijing, different vehicle pollution control scenarios were established, and emissions reductions were projected. The results show that the emissions of four air pollutants (CO, VOCs, NO_x, and PM_2.5) from vehicles in Beijing decreased by an average of 68% in 2019, compared to their levels in 2009. The contribution of NO_x emissions from diesel vehicles increased from 35% in 2009 to 56% in 2019, which indicated that clean and energy-saving diesel vehicle fleets should be further improved. Electric vehicle adoption could be an important measure to reduce pollutant emissions. With the further upgrading of vehicle structure and the adoption of electric vehicles, it is expected that the total emissions of the four vehicle pollutants can be reduced by 20%-41% by the end of the 14th Five-Year Plan period.     

Measurement of minimum ignition energies (MIEs) of dust clouds – History,present, future

Nearly 130 years ago Holtzwart and von Meyer (1891) demonstrated by experiments that explosible dust clouds could be ignited by inductive electric sparks. Then more than half a century passed before the publication of the important quantitative research of Boyle and Llewellyn (1950) and Line et al. (1959). They worked with capacitive electric sparks and found that the minimum capacitor energies ½CU² required for ignition of various dust clouds in air decreased substantially when a large series resistance, in the range 10⁴–10⁷ Ω, was introduced in the discharge circuit. When considering that the net energies of the sparks themselves were only of the order of 10% of the ½CU² discharged, the minimum net spark energies required for ignition with a large series resistance were only a few per cent of the net energies required without such a resistance.Line et al. observed that the essential effect of increasing the series resistance, and hence increasing the discharge time of the sparks, was to reduce the disturbance of the dust cloud by the blast wave from the spark. This phenomenon was explored further by Eckhoff (1970, 2017), and subsequently by some simple experiments by Eckhoff and Enstad (1976). Franke (1974, 1977) and Laar (1980) confirmed the additional finding of Line et al. (1959) that the minimum ½CU² for ignition is also substantially reduced by including a series inductance in the discharge circuit, rather than a series resistance. The basic reason is the same as with a large series resistance, viz. increased spark discharge time and hence decreased disturbance of the dust cloud by blast wave from the spark. For this reason inclusion of an appreciable series inductance in the spark discharge circuit is an essential element in current standard MIE test methods.In experiments with spark ignition of transient dust clouds produced by a blast of air in a closed vessel, it is necessary to synchronize the occurrence of the spark with the formation of the dust cloud. The precision required from this type of synchronization is typically of the order of 10 ms, which can be obtained even by mechanical arrangements, such as rapid change of spark gap length, or of the distance between two capacitor plates. The present paper reviews some methods that have been/are being used for achieving adequate synchronization of dust cloud appearance and spark discharge. Some current standard experimental methods for determining MIEs of dust clouds experimentally have also been reviewed. The same applies to some theories of electric-spark ignition of dust clouds.At the end of paper some suggestions for possible future modifications of current standard methods for measuring MIEs of explosible dust clouds are presented. With regard to justifying significant modifications of existing standard methods, the “bottom line” is, as quite often in many connections, that any modifications should be based on realistic cost/benefit evaluations.     

Awareness,riding behaviors,and legislative attitudes toward electric bikes among two types of road users: An investigation in Tianjin,a municipality in China

Objective: This study aimed to understand the awareness, riding behaviors, and legislative attitudes of electric bike (e-bike) users and non-e-bike road users toward e-bikes in Tianjin, a municipality in China.

Methods: This cross-sectional investigation included 2 components. The field survey was conducted in 9 districts (4 urban and 5 rural) from 2015 to 2017. Adult participants were interviewed using a street intercept method. The online survey was conducted using the WeChat social platform. A series of questions related to awareness and practice of e-bike safety-related issues was asked.

Results: A total of 16,859 interviews were completed, including 1,653 (794 e-bike users and 859 other road users) in-person interviews by field survey and 15,206 (4,426 e-bike users and 10,780 other road users) by online survey. Except for ignoring a red light when making a left turn (P?=?.000) and waiting across the white line at a red light (P?=?.000), which e-bike users were lower than other road users, there were no significant differences between e-bike users and other road users in regards to the correct awareness rate of riding in the opposite direction, riding in a motor vehicle lane, running red lights, jaywalking, speeding, carrying adult passengers, and riding on the expressway (P?>?.05). In addition, 74.2% of e-bike users considered helmet use necessary (P?=?.000) and 54.7% thought that installing a windshield is wrong (P?=?.000), which was higher than other road users (49.1 and 48.4%, respectively). Other road users had greater awareness than e-bike users regarding whether turning left at a red light is wrong (91.7 vs. 85.1%), waiting across the white line when the light is red is wrong (86.6 vs. 75.9%), lighs should be turned on at night (94.8 vs. 90.3%). Correct practices were far behind awareness in all kinds of violation behaviors (P?=?.000) among e-bike users in the field survey. The rate of public support for legislation including those who very much support and support legislation was 93.34% in the field survey and 87.68% in the online survey.

Conclusions: E-bike users had lower correct awareness rate than other road users regarding e-bike violation behaviors but were more concerned about safety protection than other road users. E-bike users’ correct practices were far behind their awareness for all kinds of violation behaviors. Public education on the traffic law needs to be strengthened among e-bike users. The public strongly supported special regulations for e-bike use, such as helmet use.     

废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录(第一批)》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池(铅酸电池、镍氢电池及锂电池)的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录(第二批)管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

Inertia welding for assembly of copper squirrel cages for electric motors

The automotive industry is developing designs and manufacturing processes for new generations of electric motors intended for use in hybrid and electric vehicles. There is interest in replacing the aluminum traditionally used in induction motor rotors with copper to improve motor capability. This paper focuses on solid-state welding to join copper end rings to copper spokes in the fabrication of copper rotors. Inertia friction welding was explored to examine weldability of these copper components. A better understanding of inertia welding characteristics will help the advancements in its application for induction rotors. The limitations of this application are discussed.