City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

The indirect involvement of buses in traffic accident processes

The involvement of buses in accidents usually is assessed implicitly on the basis of the direct involvement of the bus in the collision or in injury production. This paper deals with the scope and forms of indirect involvement of buses (as a sight obstruction, for example). Accidents were selected by identifying the presence of the term ‘bus’ or synonyms in the text parts of complete police reports (testimonies, statements by the persons involved, etc.) available in electronic form, then analysed in detail. Direct or indirect involvement of a bus is found in 3.6% of traffic injury accidents reported by the police in the community studied (direct involvement: 1.4%; indirect involvement: 2.2%). The different forms of indirect involvement are then described, and some possibilities of preventive measures are discussed.     

2016—2020年全国化工和危险化学品事故分析研究*

为分析“十三五”期间（2016—2020年）我国化工和危险化学品事故发生情况，统计“十三五”期间化工和危险化学品事故数量及死亡人数，从发生月份、发生区域、行业分布等方面分析事故特征，从事故类别、事故环节、关键作业等方面分析事故原因，总结2011—2020年我国化工和危险化学品事故发展趋势，按照全国4大经济区域研究2013—2020年事故特征。结果表明:“十三五”期间我国化工和危险化学品事故数量呈下降趋势，死亡人数出现波动，总体形势较为平稳。2011—2020年化工和危险化学品事故风险向中西部转移趋势明显，东北、西部地区事故死亡率普遍高于东部地区。研究结果可为相关行业从业者及监管部门提供决策参考。     

A path analysis model for explaining unsafe behavior in workplaces: the effect of perceived work pressure

Background. Unsafe behavior is closely related to occupational accidents. Work pressure is one the main factors affecting employees’ behavior. The aim of the present study was to provide a path analysis model for explaining how work pressure affects safety behavior. Methods. Using a self-administered questionnaire, six variables supposed to affect safety employees’ behavior were measured. The path analysis model was constructed based on several hypotheses. The goodness of fit of the model was assessed using both absolute and comparative fit indices. Results. Work pressure was determined not to influence safety behavior directly. However, it negatively influenced other variables. Group attitude and personal attitude toward safety were the main factors mediating the effect of work pressure on safety behavior. Among the variables investigated in the present study, group attitude, personal attitude and work pressure had the strongest effects on safety behavior. Conclusion. Managers should consider that in order to improve employees’ safety behavior, work pressure should be reduced to a reasonable level, and concurrently a supportive environment, which ensures a positive group attitude toward safety, should be provided. Replication of the study is recommended.     

Injury risk functions for frontal oblique collisions

Objective: The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set.

Method: Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes―a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured).

Results: IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18–64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes.

Conclusions: The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h.     

A Bayesian network-based approach for the assessment and management of ageing in major hazard establishments

Currently, there is an increasing attention towards ageing of industrial equipment, as the phenomenon has been recognised as a cause of severe accidents, recorded in the last years in many process establishments. Recent studies described ageing through a number of key-factors affecting the phenomenon by accelerating or slowing it down. The Italian Competent Authority for the prevention of chemical accidents (Seveso III Directive) adopted a short-cut method, accounting for the assessment of these factors, to evaluate the adequateness of ageing management during inspections at Seveso sites. In this paper, a Bayesian Network was developed, by using the data gathered during the first application of the short-cut method, with the aim to verify the robustness of the approach for ageing assessment and the validity of the a priori assumptions used in assessing the key-factors. The structure of the Bayesian network was established by using experts’ knowledge, whereas the Counting Learning algorithm was adopted to execute the parameter learning by means of the software Netica. The results showed that this network could effectively explore the complex logical and uncertain relationships amongst factors affecting equipment ageing. Results of the present study were exploited to improve the short-cut method.     

基于ALOHA软件的某化工厂选址合理性评估

为了研究化工厂选址的合理性,以山东省某化工厂为例,采用ALOHA(有害大气空中定位软件)模拟软件定量确定厂区内环氧乙烷毒气扩散事故的影响区域和敏感点毒气浓度,结合GoogleEarth地图对影响范围进行实地拟合。结果表明化工厂的环氧乙烷储罐泄漏后,毒气扩散到厂区范围之外,毒气浓度在50~500ppm之间的重伤区(ERPG-2)扩散距离可达1.7km,对周围居民的人身安全构成严重威胁;厂区应根据拟合结果重新规划工厂中环氧乙烷储罐的位置;ALOHA软件对化工厂选址评价提供了新的手段。     

Estimation of thyroid doses and health risks resulting from the intake of radioactive iodine in foods and drinking water by the citizens of Tokyo after the Fukushima nuclear accident

The release of radioactive materials from the Fukushima nuclear power plant after the Great East Japan Earthquake on 11 March 2011 poses health risks. In this study, the intake of iodine 131 (I-131) in drinking water and foods (milk, dairy products, and vegetables) by citizens of Tokyo was estimated. The effects of countermeasures (restrictions on the distribution of foods and the distribution of bottled water for infants) on reducing intake were also evaluated. The average thyroid equivalent doses without countermeasures from 21 March 2011 were 0.42 mSv in adults, 1.49 mSv in children, and 2.08 mSv in infants. Those with countermeasures were 0.28, 0.97, and 1.14 mSv respectively, reductions of 33%, 35%, and 45%. Drinking water contributed more to intake by adults and children than foods. The intake of I-131 within the first 2 weeks was more than 80% of the estimated intake, owing to its short half-life, indicating that rapid countermeasures are important in reducing intake. The average risks of cancer incidence and mortality due to I-131 for infants were estimated to be 3 × 10⁻⁵ and 0.2 × 10⁻⁵, respectively, lower than the annual risks of traffic accidents, naturally occurring radioactive material (potassium 40), and environmental pollutants such as diesel exhaust particles.     

重庆市突发环境事件时空格局及影响研究

基于2009年-2015年重庆市突发环境事件统计数据,研究了重庆市近7年突发环境事件的动态变化趋势、空间分布格局及污染影响特征,讨论了引发突发环境事件内外部因素之间的关系.结果表明:重庆市7年内共发生突发环境事件134起,且呈波动下降趋势,春季和夏季为交通事故和自然灾害高发期;突发环境事件空间上主要集中在主城九区及相邻的区县,渝西、渝东南及渝东北各区县发生次数较少.道路交通事故、设备故障和操作不当是导致突发环境事件的主要因素,主要发生形式为泄漏.污染类型主要为水污染和水气复合污染,污染物出现频率大小为:油类>酸碱类>液氨>苯及其化合物>减水剂>其他各种污染物.