基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

关于老工业区污染场地管理的探讨

根据在某老工业区第1批28块场地环境调查的实践,对污染场地管理中存在的问题进行了分析并提出了相应改进建议：①获取准确的场地资料难度很大,建议研究制定场地全过程档案管理制度;②工业企业关闭搬迁会产生新的环境污染风险,工业企业关闭搬迁应该成为污染场地管理的重要环节,环保部门应该在工业企业搬迁前介入,严格监管整个过程中的环境污染;③大量区域由于其中污染严重、风险高的场地缺乏修复资金而难以再开发利用,建议结合规划优先启动资金投入低的污染较轻区域修复,并同时对风险较高的污染场地进行风险管控,当区域开发取得一定规模、成就和收益后,可以整合资金力量和资源开展污染较重区域的修复。     

蒸发-固化法处理垃圾渗滤液反渗透浓缩液的研究

采用蒸发-固化工艺处理垃圾渗滤液反渗透浓缩液。蒸发工艺可将反渗透浓缩液减量化,固化工艺可将蒸发残留液中的污染物稳定化。研究表明,蒸发残留液宜采用水泥和石灰混合料进行固化,混合料最佳水泥与石灰质量比约为1︰2,每100 mL蒸发残留液(质量约为120 g)最佳投加量为50 g。固化体含水率低于40%,抗压强度高于1.0 MPa,适合填埋处置,其浸出液污染物含量较低。采用硅酸钠和硫酸钙作为添加剂可加快固化速度,提高固化体的抗压强度。利用蒸发-固化工艺处理反渗透浓缩液可取得良好的经济和社会效益。     

阜新市空气监测点位优化的聚类分析

基于聚类分析法利用数据之间距离系数进行分类的原理,建立空气监测点位聚类分析优化模型,结合阜新市地形、气象及历史监测数据,进行阜新市空气监测点位布设优化应用,优化结果表明:距离相似水平取d=0.3时,环保局(B点)与人民公园(C点)监测点空气污染物浓度分布相似性最高,合并为1点,增设气象台监测点位作为清洁背景点,4个点位构成阜新市空气监测新网络;利用CALPUFF模型模拟对优化后监测点位进行相关性检验。检验结果表明:监测点位优化后SO2浓度与实测值相关系数为0.984,PM10相关系数为0.968,NO2相关系数为0.973。CALPUFF模型模拟值与实际监测值之间相关系数均大于0.75,表明优化后的阜新市空气监测点位具有客观环境代表性;监测点位优化与检验方法具有一定应用价值。     

An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

Characterization of peroxyacetyl nitrate (PAN) under different PM2.5 concentration in wintertime at a North China rural site

As a secondary pollutant of photochemical pollution, peroxyacetyl nitrate (PAN) has attracted a close attention. A four-month campaign was conducted at a rural site in North China Plain (NCP) including the measurement of PAN, O₃, NO_x, PM_2.5, oxygenated volatile organic compounds (OVOCs), photolysis rate constants of NO₂ and O₃ and meteorological parameters to investigate the wintertime characterization of photochemistry from November 2018 to February 2019. The results showed that the maximum and mean values of PAN were 4.38 and 0.93 ± 0.67 ppbv during the campaign, respectively. The PAN under different PM_2.5 concentrations from below 75 μg/m³ up to 250 μg/m³, showed different diurnal variation and formation rate. In the PM_2.5 concentration range of above 250 μg/m³, PAN had the largest daily mean value of 0.64 ppbv and the fastest production rate of 0.33 ppbv/hr. From the perspective of PAN's production mechanism, the light intensity and precursors concentrations under different PM_2.5 pollution levels indicated that there were sufficient light intensity and high volatile organic compounds (VOCs) and NO_x precursors concentration even under severe pollution level to generate a large amount of PAN. Moreover, the bimodal staggering phenomenon of PAN and PM_2.5 provided a basis that PAN might aggravate haze through secondary organic aerosols (SOA) formation.     

基于视频识别的直接作业环节安全管控

概述了石化行业现场直接作业环节的安全管控现状,分析了现场管控过程中存在的问题。考虑现场安全管理和监督监控的实际需要,设计了石化行业直接作业现场智能化管控系统,并深入研究作业现场违章行为图像识别的关键技术。现场应用表明,系统充分体现了日常管理、实时监控、智能报警、统计分析等方面的便利性和有效性,各类违章行为图像识别准确率达到80%以上,具有一定的推广价值。     

河北省某大型焦化厂地下水中多环芳烃的污染特点、源解析及生态风险评价

为研究焦化厂地下水中美国EPA优先控制的16种多环芳烃(PAHs)的分布特点和污染来源,本研究联合使用统计技术、正定矩阵因子分析(PMF)模型和风险商值法,深入分析了焦化厂地下水中PAHs的分布规律,定量解析了PAHs的污染来源,并且对其生态风险进行了科学评价.结果表明,焦化厂地下水中16种PAHs的总检出率较高,达到46.7%.地下水中∑₁₆PAHs的浓度范围是n.d.～444.9μg·L^-1,均值为1.88μg·L^-1.不同生产车间地下水中PAHs的浓度存在明显差异,其中污染最重的车间位于焦油精制区,地下水中∑₁₆PAHs的浓度为444.92μg·L^-1.应用PMF源解析模型,识别出该焦化厂地下水中PAHs有二类污染源：一是石油的燃烧源,二是煤和生物质燃烧以及石油类的泄漏,二种污染源对焦化厂地下水中PAHs的贡献率分别为38.6%和61.4%.焦化厂地下水中∑₁₆PAHs处在高生态风险等级,且有53.4%的地下水采样点单体PAHs的生态风险处在高风险等...     

生活垃圾填埋场建设项目环保验收调查方法研究简

垃圾填埋场建设项目的主要环境问题包括：渗沥液排放、地下水环境污染、大气环境污染、噪声污染、景观变化和环境安全。根据工作经验,建立了包括建设项目基本情况、生态环境影响、社会环境影响、生态环境保护措施四大类调查监测指标为核心的环保验收调查指标体系,提出了文件资料核实、现场勘查、遥感调查、公众意见调查、环境监测和摄影法为主的建设项目竣工环保验收调查技术方法。