基于多孔环形喷嘴的可燃爆粉尘分散特征的密度效应研究*

为了研究不同密度的可燃爆粉尘在内置多孔环形喷嘴的20 L爆炸特性测试装置中的分散特征,基于负载粒子流方法、耦合DPM动量平衡方程和时间平均 Navier Stokes控制方程组,实现3种不同密度的煤粉、铝粉和锆粉在20 L爆炸测试装置中粉尘分散全过程的数值模拟。研究结果表明:多孔环形喷嘴的分散较为均匀,但是约束管道末端存在局部粉尘残留区,致使爆炸仓内真实粉尘浓度远低于形式浓度;爆炸仓中心位置的最大湍动能随着粉尘密度的增加而减小,只有显著地变化粉尘密度才能展示区分度较高的浓度峰值和抵达浓度峰值的时间。     

对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

基于视频分析的人群密集场所客流监控预警研究

为实现人群密集场所客流安全隐患早发现,辅助管理人员早决策,人群聚集风险区早疏散,提升对灾难的预见性和主动性。在国内外人群异常聚集监测预警现状分析基础上,对比分析得出监控视频分析技术是解决人群密集场所精准预警难题较为理想的解决方案;构建以视频智能分析的人群计数、密度估计、行人追踪、活动烈度识别为核心技术的人群密集场所风险预警技术框架;将该技术框架应用到某大型商圈的商业街区,获得监控区域内的人群总数、密度分布、行人轨迹和异常活动等特征。结果表明:提出的基于视频分析的人群密集场所风险预警技术框架可为城市大型商圈、交通枢纽、大型活动场所等城市公共场所的安全管理提供参考和借鉴。     

二氧化碳水合物储气特性的实验研究

利用二氧化碳水合物小型实验装置分别在恒容和恒压条件下,研究了机械搅拌对二氧化碳气体溶解的影响以及温度与水-气比对二氧化碳水合物形成和储气密度的影响。通过实验结果发现,机械搅拌对二氧化碳的溶解有非常明显的促进作用,可以在3 min内完成溶解过程,促进溶解作用好于添加剂SDS。研究还发现,反应温度越低,二氧化碳水合物的生成速率越快,总的储气量越大,而水-气比越大,储气密度越小。在实验压力3 MPa、反应温度273.55 K的条件下,1体积的水生成水合物后可储存157体积的二氧化碳。     

中国城镇建设用地经济密度的区位差异及影响因素——基于273个地级及以上城市的分析

以全国地级及以上城市中的273个样本城市为研究对象,分别从全国、沿海地区、内陆地区三个层次考察了样本城市城镇建设用地经济密度的区位差异。根据柯布-道格拉斯生产函数的理论与分析方法建立模型,分析了资本、劳动力、土地三大投入要素和城市全要素生产率等对城镇建设用地的影响,并在控制以上变量的条件下侧重考察了城市区位差异的影响。发现我国城镇建设用地经济密度的区位差异明显,具有区位优势的城市土地效益平均高于缺乏区位优势的城市;沿海水陆口岸的区位优势十分显著,建设用地经济密度相对较高,而内陆地区水陆口岸的区位优势有待发掘;航空口岸对提高城镇建设用地经济密度未发挥积极作用。分析结果表明,生产要素投入、科技水平、市场环境和城市发展阶段是影响土地效益的主要因素,但不同区位条件下城镇建设用地经济密度的影响因素有所不同,为提高城镇建设用地经济密度,不同区位条件的城市着力点应各有侧重。     

Inverse modeling of Asian Rn flux using surface air Rn concentration

When used with an atmospheric transport model, the ²²²Rn flux distribution estimated in our previous study using soil transport theory caused underestimation of atmospheric ²²²Rn concentrations as compared with measurements in East Asia. In this study, we applied a Bayesian synthesis inverse method to produce revised estimates of the annual ²²²Rn flux density in Asia by using atmospheric ²²²Rn concentrations measured at seven sites in East Asia. The Bayesian synthesis inverse method requires a prior estimate of the flux distribution and its uncertainties. The atmospheric transport model MM5/HIRAT and our previous estimate of the ²²²Rn flux distribution as the prior value were used to generate new flux estimates for the eastern half of the Eurasian continent dividing into 10 regions.The ²²²Rn flux densities estimated using the Bayesian inversion technique were generally higher than the prior flux densities. The area-weighted average ²²²Rn flux density for Asia was estimated to be 33.0 mBq m⁻² s⁻¹, which is substantially higher than the prior value (16.7 mBq m⁻² s⁻¹). The estimated ²²²Rn flux densities decrease with increasing latitude as follows: Southeast Asia (36.7 mBq m⁻² s⁻¹); East Asia (28.6 mBq m⁻² s⁻¹) including China, Korean Peninsula and Japan; and Siberia (14.1 mBq m⁻² s⁻¹). Increase of the newly estimated fluxes in Southeast Asia, China, Japan, and the southern part of Eastern Siberia from the prior ones contributed most significantly to improved agreement of the model-calculated concentrations with the atmospheric measurements. The sensitivity analysis of prior flux errors and effects of locally exhaled ²²²Rn showed that the estimated fluxes in Northern and Central China, Korea, Japan, and the southern part of Eastern Siberia were robust, but that in Central Asia had a large uncertainty.     

Determination of specific gravity of municipal solid waste

This investigation was conducted to evaluate experimental determination of specific gravity (G_s) of municipal solid waste (MSW). Water pycnometry, typically used for testing soils was adapted for testing MSW using a large flask with 2000 mL capacity and specimens with 100–350 g masses. Tests were conducted on manufactured waste samples prepared using US waste constituent components; fresh wastes obtained prior and subsequent to compaction at an MSW landfill; and wastes obtained from various depths at the same landfill. Factors that influence specific gravity were investigated including waste particle size, compaction, and combined decomposition and stress history. The measured average specific gravities were 1.377 and 1.530 for as-prepared/uncompacted and compacted manufactured wastes, respectively; 1.072 and 1.258 for uncompacted and compacted fresh wastes, respectively; and 2.201 for old wastes. The average organic content and degree of decomposition were 77.2% and 0%, respectively for fresh wastes and 22.8% and 88.3%, respectively for old wastes. The G_s increased with decreasing particle size, compaction, and increasing waste age. For fresh wastes, reductions in particle size and compaction caused occluded intraparticle pores to be exposed and waste particles to be deformed resulting in increases in specific gravity. For old wastes, the high G_s resulted from loss of biodegradable components that have low G_s as well as potential access to previously occluded pores and deformation of particles due to both degradation processes and applied mechanical stresses. The G_s was correlated to the degree of decomposition with a linear relationship. Unlike soils, the G_s for MSW was not unique, but varied in a landfill environment due both to physical/mechanical processes and biochemical processes. Specific gravity testing is recommended to be conducted not only using representative waste composition, but also using representative compaction, stress, and degradation states.     

电除尘器电源交流分量对PM_(2.5)等细微颗粒物除尘效率的影响

除尘器对颗粒物的除尘效率与颗粒物的荷电量密切相关,PM2.5等细小颗粒物由于其荷电量不足而导致其吸收效率较低,对环境造成危害。为了增加粒子的荷电量,以粒子荷电原理为理论依据,从离子电流密度和通过电凝并扩大尘粒中位径2个方面研究了电除尘电源中交流电压分量对PM2.5等细小颗粒物荷电特性的影响,得出了电除尘器电源中交流电压分量可从以上2个方面提高装置对PM2.5等微小颗粒物的荷电量,且频率越高,幅值越大,荷电效果越好,从而可以提高装置对细小颗粒物的除尘效率。     

前沿技术进步、技术效率和区域经济差距

采用1998-2009年中国30个省市的人均GDP与当年全国人均GDP的差值作为区域经济差距指标,运用核密度估计方法观察了我国区域经济差距的变动状况。从核密度图可知,我国区域经济呈现出收敛的态势;通过随机前沿模型从全要素生产率中分解出前沿技术进步和技术效率,利用1998-2009年28个省市的面板数据,检验了全要素生产率对区域经济差距的影响。实证结果显示,前沿技术进步能够显著的缩小区域经济差距,其中对于东部地区的效果较为显著,技术效率则能够扩大东部地区的经济差距,对于中部和西部地区的影响不显著。政策含义是缩小东部地区经济差距的主要途径是加大对科技创新领域的投入,加强对欠发达地区的技术支持;对于中部地区和西部地区而言,则应该是加大市场化水平、对外开放水平和地方支出比重。     

基于网格划分的宜兴市区滨水区可达性评价

城市滨水区可达性不仅仅是空间距离的阻隔,还包括人们对滨水空间的需求及滨水区自身对公众的吸引力。依据潜能模型的概念,选取人口密度、滨水区综合质量和以土地利用表达的交通作为评价因子,借助ArcGIS93软件,建立了基于网格划分的滨水区可达性计算模型。该模型通过对研究区域进行等距网格划分以及定量计算网格内的人口密度、最小阻力成本和滨水区综合质量来进行滨水区可达性的定量评价。运用该模型评价了宜兴市中心城区居民至各滨水区的可达性水平,发现各滨水区平均可达性水平存在明显差异,最高的是团氿,最低的是蠡河;对每个滨水区而言,可达性从空间上均呈现出以滨水区为中心由内向外递减的趋势。评价结果可为城市滨水区合理建设格局的制定和居民享用滨水区的公平性提供决策参考