流域农业面源污染动态监控系统的建立和运行

提出建立农业面源污染动态监控系统的技术构思,构筑了“辽宁省农业面源污染动态监控系统”的功能及运行机制的构架,阐述了推进此动态监控系统完善的研究方案与系统实施的保证措施。     

哈尔滨市功能区噪声变化趋势分析

根据哈尔滨市四类功能区噪声监测数据,对哈尔滨市功能区噪声变化趋势进行了分析,得出1、3、4类功能区噪声Leq平均值均较稳定,2类功能区遍布广泛,声源复杂,突发噪声较频繁。     

Pollution characteristics and health risk assessment of polycyclic aromatic hydrocarbons and nitrated polycyclic aromatic hydrocarbons during heating season in Beijing

Polycyclic aromatic hydrocarbons(PAHs) and their nitrated derivatives(NPAHs) attract continuous attention due to their outstanding carcinogenicity and mutagenicity. In order to investigate the diurnal variations, sources, formation mechanism, and health risk assessment of them in heating season, particulate matter(PM) were collected in Beijing urban area from December 26, 2017 to January 17, 2018. PAHs and NPAHs in PM were quantitatively analyzed via gas chromatography-mass spectrometry(GC-MS). ...     

西安市秋冬季市区与山区微生物气溶胶组成特征及来源

为探究城市市区与山区微生物气溶胶组成特征及来源,在西安市市区(城区和郊区)及南郊山区设立3个采样点,采集细颗粒物、土壤及叶片样本.通过高通量测序法,解析不同采样点真菌与细菌群落结构,考察其时空变化特征;使用Source Track源解析技术对空气中微生物进行来源分析.结果表明,不同采样点真菌、细菌菌属差异较大,说明地理位置对空气中微生物的群落结构影响显著;冬季市区检测出较多的潜在真菌致病菌和细菌致病菌,且具有较高的相对丰度和多样性.通过源解析技术发现,在局部源叶片和土壤中,叶片表面微生物是空气中微生物的主要潜在源,且秋季叶片对空气中微生物的贡献率高于冬季.本研究不仅为空气中生物气溶胶的溯源研究提供了一定基础,也为深入了解大气中微生物污染特性和为我国空气环境质量评价与疾病预防提供一定的科学依据.     

Distribution and source of microplastics in China's second largest reservoir - Danjiangkou Reservoir

Fresh water microplastic pollution is of pressing concern globally, but its distribution and sources in reservoirs are poorly documented. Danjiangkou Reservoir is the second largest reservoir in China and is divided into the Han Reservoir and Dan Reservoir. In this work, microplastic abundances and morphological characteristics of the reservoir were investigated. The microplastic abundance of 15 main tributaries of the reservoir was also measured. The vertical distribution (in water column and sediment), horizontal distribution (in Han Reservoir and Dan Reservoir) and source of microplastics were analyzed. Microplastics accumulated in the middle layer of the reservoir, and the size and color of the microplastic particles changed from the surface to the bottom, which implies that surveys of surface water are not enough to determine the microplastic contamination for deep water reservoirs. In the surface water, the microplastic abundance in the Han Reservoir was lower than that in the Dan Reservoir (p < 0.05), but microplastic abundance did not differ significantly in the intermediate and bottom water. Tributaries were one of the main sources of microplastics for Han Reservoir but not for Dan Reservoir. Agricultural cultivation in the hydro-fluctuation belt might be an important source of microplastics in the Dan Reservoir, which should be given additional attention. The results of this study can provide valuable information for developing microplastic sampling strategies in deep water reservoirs. Further studies are recommended to investigate the process through which microplastics in the hydro-fluctuation belt enter the reservoir and the sinking behavior of microplastics in the reservoir.     

Chemical characteristics, oxidative potential, and sources of PM2.5 in wintertime in Lahore and Peshawar, Pakistan

The chemical characteristics, oxidative potential, and sources of PM_2.5 were analyzed at the urban sites of Lahore and Peshawar, Pakistan in February 2019. Carbonaceous species, water soluble ions, and metal elements were measured to investigate the chemical composition and sources of PM_2.5. The dithiothreitol (DTT) consumption rate was measured to evaluate the oxidative potential of PM_2.5. Both cities showed a high exposure risk of PM_2.5 regarding its oxidative potential (DTT_v). Carbonaceous and some of the elemental species of PM_2.5 correlated well with DTT_v in both Lahore and Peshawar. Besides, the DTT_v of PM_2.5 in Lahore showed significant positive correlation with most of the measured water soluble ions, however, ions were DTT-inactive in Peshawar. Due to the higher proportions of carbonaceous species and metal elements, Peshawar showed higher mass-normalized DTT activity of PM_2.5 compared to Lahore although the average PM_2.5 concentration in Peshawar was lower. The high concentrations of toxic metals also posed serious non-carcinogenic and carcinogenic risks to the residents of both cities. Principle component analysis coupled with multiple linear regression was applied to investigate different source contributions to PM_2.5 and its oxidative potential. Mixed sources of traffic and road dust resuspension and coal combustion, direct vehicle emission, and biomass burning and formation of secondary aerosol were identified as the major sources of PM_2.5 in both cities. The findings of this study provide important data for evaluation of the potential health risks of PM_2.5 and for formulation of efficient control strategies in major cities of Pakistan.     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

Large eddy simulation of plume dispersion behind an aircraft in the take-off phase

The aim of this paper is to provide an investigation, using large eddy simulation, into plume dispersion behind an aircraft in co-flowing take-off conditions. Validation studies of the computational model were presented by Aloysius and Wrobel (Environ Model Softw 24:929–937, 2009) and a study of the flow and dispersion properties of a double-engine aircraft jet was presented by Aloysius et al. (EEC/SEE/2007/001, EUROCONTROL Experimental Centre, ), in which only the engine was modelled. In this paper, the complete geometry of a Boeing 737 is modelled and investigated. The current work represents a contribution towards a better understanding of the source dynamics behind an airplane jet engine during the take-off and landing phases. The information provided from these simulations will be useful for future improvements of existing dispersion models.     

沈阳市大气中PM2.5来源解析研究

通过2015年在沈阳市采集PM2.5样品及源类样品,分析样品的质量浓度和化学组成,用化学质量平衡(CMB)模型对该市PM2.5来源进行解析。结果表明:沈阳市大气中PM2.5浓度时空变化特征明显;各主要源类对沈阳市PM2.5的分担率依次为煤烟尘(28.03%)、二次无机离子(22.63%)、机动车尾气尘(17.27%)、城市扬尘(13.28%)、建筑尘(5.94%)、土壤风沙尘(5.82%)、道路尘(3.04%)、生物质燃烧尘(2.74%)和冶金尘(1.25%)。燃煤和机动车的有效控制既能降低本类源的贡献,也能降低二次无机离子,体现了多源类综合治理原则。     

应用悬浮填料预处理微污染原水的影响因素探讨

对采用悬浮填料的生物接触氧化原水预处理技术的影响因素进行了探讨。分析了自然挂膜条件下的工艺启动过程，研究了停留时间、气水比、温度、浊度条件对污染物去除效果的影响。通过夏、秋、冬季的中试运行效果表明：停留时间为60min，生物预处理装置对污染物的去除具有较好的效果；温度低于8.5℃，对氨氮去除效果影响较大；浊度对本工艺运行影响不大；气水比为0.375，足够满足生物预处理的运行。