Sorption of tylosin on clay minerals

The equilibrium sorption of tylosin (TYL) on kaolinite and montmorillonite was measured at different solution pH using batch reactor systems. The results showed that all the sorption isotherms were nonlinear and that the nonlinearity decreased as the solution pH increased for a given clay. At a specific aqueous concentration, the single-point sorption distribution coefficient (K_D) of TYL decreased rapidly as the solution pH increased. A speciation-dependent sorption model that accounted for the contributions of the cationic and neutral forms of TYL fit the data well, suggesting that the sorption may be dominated by both ion exchange and hydrophobic interactions. The isotherm data also fit well to a dual mode model that quantifies the contributions of a site-limiting Langmuir component (ion exchange) and a non-specific linear partitioning component (hydrophobic interactions). X-ray diffraction analyses revealed that the interlayers of montmorillonite were expanded due to the uptake of TYL. TYL molecules likely form a monolayer surface coverage.     

Deposition rates of unattached and attached radon progeny in room with turbulent airflow and ventilation

In this paper deposition rate coefficients for unattached and attached radon progeny were estimated according to a particle deposition model for turbulent indoor airflow described by Zhao and Wu [2006. Modeling particle deposition from fully developed turbulent flow in ventilation duct. Atmos. Environ. 40, 457–466]. The parameter which characterizes turbulent indoor airflow in this model is friction velocity, u*. Indoor ventilation changes indoor airflow and friction velocity and influences deposition rate coefficients. Correlation between deposition and ventilation rate coefficients in the room was determined. It was shown that deposition rate coefficient increases with ventilation rate coefficient and that these parameters of the Jacobi room model cannot be assumed to be independent. The values of deposition rate coefficients were presented as functions of friction velocity and ventilation rate coefficient. If ventilation rate coefficient varies from 0.1 up to 1 h⁻¹, deposition rate coefficients for unattached and attached fractions were estimated to be in the range 3–110 h⁻¹ and 0.015–0.35 h⁻¹, respectively.     

USE OF X-RAY FLUORESCENCE TO DETERMINE TRACE METALS IN WATER RESOURCES1

ABSTRACT. The X-ray fluorescence method was used to analyze trace metals collected in particulate form on filter papers and from the ionic state by ion exchange filter papers. The samples were prepared by allowing water to pass through these filter papers. The procedures necessary for using the X-ray fluorescence method are described. A number of samples were taken from the Great Miami River in Dayton, Ohio over one year showing the presence of the following metals, Ca, Ti, Cr, Fe, Cu, Zn, Sr, and Cd. Elements in the periodic table between Ti and Cs were detectable to a sensitivity limit of the order of 30 ppb for metals in the particulate form and 0.4 ppm for metals in the ionic form.     

居室放射性

本文介绍了放射性的来源,讨论了室内γ射线和氡及其子体,计算了相关的年剂量当量     

自供电方式的输气站发电机房火险管理

结合涩宁兰输气管道涩北首站实际情况,就发电机房发生火灾事故后的应急反应程序进行了详细论证,提出了具体的火灾防范措施和改进需求,对基于自供电输气场站的发电机房火灾事故应急工作提供了参考.     

Heavy metals' content of automotive shredder residues (ASR): evaluation of environmental risk

Every year between 8 and 9 millions of vehicles in the European Union arrive to their end of life. Car wastes can have a very high metal content, falling into hazardous waste class. A preliminary evaluation of these wastes could be made by metals' leaching test runs which is the main objective of the present study. Evaluation of the total metal content was carried out by X-ray fluorescence and the mobility of these metals using two simple standardized extractions such as the TCLP (Toxicity Characterisation Leaching Procedure) of the US EPA and the German leaching test DIN 38414-S4. Additionally, an extraction test with acetone was performed in order to recognise metals bounded to organic matter. The results show that the total metal content of the ASR can overpass the established values for inert residues. Lead and zinc contents are fairly well correlated with grain-size, whilst other metals' contents do not exhibit clear grain-size dependence.     

弹药库房挥发性有机物吸附-光催化降解复合材料研究进展

综述了弹药库房中有毒有害气体的来源和危害,以及去除挥发性有机物的技术方法,介绍了光催化降解理论基础、光催化剂的结构和改性措施、吸附剂的种类和吸附-光催化复合材料的制备方法,指出了当前光催化降解挥发性有机物存在的主要问题,结合弹药库房实际环境,提出了未来主要的研究方向。     

基于分形维数的斜坡非饱和带土体大孔隙分布研究

对取自于云南省昭通市头寨滑坡滑源区附近的两个大尺度(25cm×25cm×50cm)土柱样品进行CT扫描,选取典型剖面切片,通过CT值范围将大孔隙分离从而研究土体中的大孔隙分布;计算大孔隙分布分维数(盒维数),研究其大孔隙的不规则特征,结果表明:土体中大孔隙的盒维数随深度增加呈单调递减规律,且与大孔隙度具有显著正相关关系;但大孔隙度只能表征在某一深度上大孔隙的分布多少,而大孔隙的不规则特征则需盒维数表征;最后得到大孔隙的累积大孔隙度与大孔隙孔径(在盒维数为常数时)符合幂函数规律,研究结果有利于利用分形理论建立大孔隙模型,从而研究水分在大孔隙中运动过程。     

水环境中的碘化X-射线造影剂及其去除工艺研究进展

碘化X-射线造影剂(Iodinated X-ray contrast media,ICM)在水环境中被广泛检出,因其近期被发现是碘化消毒副产物的前体物而受到越来越多的关注.本文总结了ICM在污水、地表水和饮用水等水环境中的污染现状;分析了ICM的转化产物及转化机制;重点介绍了ICM的去除工艺,包括高级氧化技术、辐射技术以及生物降解转化技术;讨论了ICM及其降解转化产物可能对环境造成的生态风险.最后,本文对未来ICM的研究前景进行了展望.