北京市大气细粒子的来源分析

细粒子(空气动力学直径小于2.5μm的颗粒物)污染是许多城市重要的大气环境问题.从1999年至2000年对北京市细粒子展开了4次采样和化学分析,有效采样天数为40d.利用正定矩阵分解(PMF)方法对细粒子的来源进行了分析.化学成分包括EC(元素碳)、有机物、SO₄^2-、F^-、Cl^-、Fe、Ca、K、Mg、Al、Na、Zn、Mn、Ti、Pb、Ba和P等17种.发现主要来源有6类:地面扬尘、建筑源、生物质燃烧、二次源、机动车排放和燃煤.     

300MW燃煤锅炉机组超细颗粒聚并器的实验研究

为了解决燃煤锅炉烟气中超细颗粒难以脱除的问题,基于流体动力学原理设计了一种超细颗粒聚并器,并在300 MW燃煤锅炉机组电除尘器的前置烟道中进行了实验研究。结果表明,聚并器内部存在超细颗粒之间以及超细颗粒与大颗粒之间的相互聚集行为,从而使超细颗粒数量显著减少。例如,对于粒径在2.65和10.48μm以下的颗粒,其体积比例在聚并器出口分别减少了56.7%和62.3%,在电除尘器出口的粉尘浓度减少了26.34 mg/Nm3,这表明,基于流体动力学原理的聚并器对超细颗粒的聚并作用明显,具有良好的应用前景。     

杭嘉湖蚕桑区主要大气氟污染源及治理现状

对杭嘉湖蚕桑区大气氟主要污染源——砖瓦厂氟的排放状况及各种含氟烟道废气治理装置的治理效果进行了较为深入的调查分析,认为砖瓦厂含氟废气不经烟道排放较为严重。目前砖瓦厂所采用的各种含氟废气治理装置中,旋流板塔装置除氟效率较佳,可使废气氟的排放浓度降至5mg/m~3以下,基本上能消除下风向300m以远的大气氟污染对蚕桑的严重危害。     

用核子微探针进行单个大气颗粒物的分析

本文对单个大气颗粒物进行了分析研究，用核子微探针对首钢地区单个大气颗粒物进行了扫描分析，用三维等高线法给出了各种元素在一群单个大气颗粒物中的二维分布。从一群单个大气颗粒物中各元素的二维分布可对首钢地区大气污染的特征及来源进行分析研究。     

玻璃弹簧负载镶嵌纳米粒子TiO2膜光催化降解活性深蓝K-R

以玻璃弹簧负载镶嵌纳米粒子的TiO2膜降解活性深蓝K-R模拟废水,考察了pH值和温度对脱色率的影响以及CODCr去除率与脱色率之间的关系,并用XRD和SEM对催化剂进行了表征.结果表明,pH值和温度对脱色率均有显著影响,CODCr去除率与脱色率的比值约为70%左右;XRD表明,TiO2矿相主要为锐钛型,SEM表明,镶嵌TiO2粒子均匀,粒径约50nm.     

纳米镍/铁和铜/铁双金属对四氯乙烯脱氯研究

以实验室合成的纳米双金属颗粒(Ni/Fe和Cu/Fe)为反应材料,对四氯乙烯(PCE)进行脱氯试验研究.纳米金属颗粒(直径范围在1～100nm)比表面积比微米级铁颗粒高数十倍.结果表明,纳米Ni/Fe和Cu/Fe对四氯乙烯有明显的脱氯作用,且脱氯反应符合准一级反应动力学方程;在作为还原剂的铁表面镀上一薄层起催化作用的金属Ni或Cu,催化剂的存在大大降低脱氯反应活化能,提高了脱氯速率,并减少氯代副产物的产量.与零价铁及微米级双金属系统(Ni/Fe,Cu/Fe)相比,纳米颗粒对PCE的脱氯速率有明显提高,尤其是纳米Ni/Fe,标准化反应速率常数KSA为4.283 mL·m-2·h-1,分别比零价铁和微米级Ni/Fe系统快33.23倍和11.59倍.纳米Cu/Fe标准化反应速率常数KSA为1.194 mL·m-2·h-1,分别比零价铁和微米级Cu/Fe双金属系统快9.26倍和5.24倍.在相同条件下,纳米Ni/Fe脱氯速率常数KSA是纳米Cu/Fe的3.59倍.     

Isomer distribution of nitrotriphenylenes in airborne particles, diesel exhaust particles, and the products of gas-phase radical-initiated nitration of triphenylene

The formation of mutagenic nitro-polycyclic aromatic hydrocarbons (NPAHs) 1- and 2-nitrotriphenylene (1- and 2-NTP) via gas-phase OH or NO₃ radical-initiated reactions of triphenylene was demonstrated for the first time using a flow reaction system. In contrast with the results of conventional electrophilic nitration, 2-NTP was formed in larger yield than 1-NTP, but this is consistent with the mechanism proposed for gas-phase radical-initiated nitration of PAH. In diesel exhaust particle (DEP) samples, both 1- and 2-NTP were identified and their concentrations determined, as well as 1-nitropyrene (1-NP), which is a representative combustion-derived NPAH: the mean concentrations of 1-NTP, 2-NTP, and 1-NP were 4.7, 1.9, and 32 pmol mg_DEP^–1, respectively. The mean 2-NTP/1-NTP, 1-NTP/1-NP, and 2-NTP/1-NP ratios in samples of airborne particles collected in a residential area in Osaka, Japan, were>1.55,<0.25, and 0.37, respectively; these values are much higher than those of the DEP samples. This finding indicates that there is another source for airborne NTPs, especially 2-NTP, apart from diesel exhaust. These results strongly suggest that airborne NTPs originate from atmospheric processes such as radical-initiated reactions of triphenylene, and this has a significant influence on the atmospheric occurrence of NTPs.     

Association of the mutagenicity of airborne particles with the direct emission from combustion processes investigated in Osaka, Japan

The association of the direct-acting mutagenicity of soluble organic fraction of airborne particles toward Salmonella typhimurium YG1024 strain with the direct emission was investigated at a roadside and at a residential area in Osaka, Japan. The direct-acting mutagenicity was evaluated as mutagenic activity per unit volume of ambient air (rev m⁻³) and/or that per airborne particulate weight collected on a filter (rev mg⁻¹). The annual or diurnal changes of the mutagenicity of airborne particles at the residential site showed similar patterns to those of some gaseous pollutants such as NO₂ and SO₂, which were emitted from combustion processes. This result indicates that the mutagenicity is mainly attributable to the primary emissions. From the analysis of the relationship between the wind sector and the mutagenic intensity, rev m⁻³ and rev mg⁻¹ values were strongly affected by the emissions from the fixed sources and from the mobile sources, respectively. The rev m⁻³ value and concentration of 1-nitropyrene (1-NP) in unit per m³ at the roadside were a factor of 2.6 and 2.8 higher than those at the residential site, respectively, but the rev mg⁻¹ value and concentration of 1-NP in unit per mg at the roadside were substantially comparable to those at the residential area. These observations suggest that the characteristics of the airborne particles can be attributed to the automotive emissions even at the suburban area.     

南京地区相对湿度对气溶胶含量的影响

为了研究南京地区相对湿度对气溶胶的影响,利用位于南京信息工程大学的拉曼-瑞利-米氏激光雷达,分析湿度廓线对消光系数的影响;利用2014年3月~2015年2月国控点环境监测数据对可吸入颗粒物浓度特征进行统计,并与相对湿度进行逐月和四季对比分析,并计算各参数之间的相关系数,以期为南京市的城市布局与规划、大气污染治理等提供更多参考.结果表明,低空气溶胶的消光系数廓线与相对湿度廓线变化趋势高度一致,地面相对湿度与可吸入颗粒物浓度在一定湿度范围（以不发生重力沉降为界限）内,相对湿度越大越有利于颗粒物的形成,超过这个范围,相对湿度越大,颗粒物浓度越低,在南京地区,对于PM₁₀来说,这个界限在40%~49%,对于PM_2.5来说,这个界限在50%~59%.     

成都西南城郊黑碳和PM2.5 浓度变化特征及其影响因子

四川盆地是我国灰霾和大气污染易发和频发区之一,目前关于本地区黑碳气溶胶（black carbon,BC）的相关研究较少。利用2017年11月—2018年12月成都西南城郊地区黑碳气溶胶以及PM_2.5观测资料,结合气象资料和其他污染物浓度资料,分析BC和PM_2.5浓度,BC浓度在PM_2.5浓度中所占比例（黑碳占比）的季节、月、日变化特征及其影响因子。结果表明：（1）BC逐小时浓度范围为0.18—40.51 μg?m^?3,平均值为(5.26±4.68) μg?m^?3,本底浓度为3.34 μg?m^?3。PM_2.5逐小时浓度范围为1.00—344.50 μg?m^?3,平均值为(60.02±46.91) μg?m^?3,本底浓度为33.38 μg?m^?3。日变化均呈“白天低,早晨、夜间高”的变化特征,其中冬季浓度最高,春、秋季次之,夏季浓度最低。（2）黑碳占比均值为9.16%±5.13%,白天黑碳占比低,夜间黑碳占比高,且夏季最高,冬季最低。随着空气污染加重,冬季占比缓慢增加,其他三季占比减小。（3）BC与NO₂和CO相关性较好,表明西南城郊BC排放主要受机动车尾气、生物质燃烧影响。BC和SO₂相关系数偏小,燃煤等工业源排放对西南城郊BC的贡献较小。（4）风速、温度和湿度与BC浓度均有很好的相关性,其中风速对BC浓度的影响最大,当风速小于2.0 m?s^?1时,BC浓度值明显偏高;BC浓度大于20.00 μg?m^?3的高值区主要集中在西北、西南以及东北风向上,即：偏东北方向市中心大气中的污染物,以及西南方向远郊地区的污染物可能对西南城郊高浓度黑碳的贡献更大。