硅藻土负载型非均相芬顿催化剂制备及其降解苯酚的实验研究

以硅藻土为载体,采用直接蒸发法负载铁的氧化物,制备了一种新型负载型非均相芬顿催化剂,通过SEM、EDS和XRD等对催化剂进行了表征,并以苯酚去除率考察了催化剂性能。结果表明:铁氧化物可成功负载于硅藻土上;催化剂制备时最优铁离子浓度和固液质量比分别为0.5 mol/L和1∶10;催化剂重复使用性高,耐酸碱性良好,对苯酚的去除率可达99%以上。催化剂利用了硅藻土优异的物化性质,对难降解有机废水具有良好的应用前景。     

飞机每飞行小时直接维修工时评估研究

目的细化军用飞机部队使用保障阶段每飞行小时直接维修工时评估的实施方法。方法界定评估条件、确定数据范围和来源,结合部队信息收集工作实际,通过制定各类表格收集数据并分析加工,最终得出评估结论。结果较客观地反映了某型飞机相关维修性特征。结论评估方法贴近部队工作实际,可操作性强,可为各类装备开展相关维修性评估工作提供借鉴。     

沂蒙山区典型小流域降雨径流的磷素输出特征

以沂蒙山区孟良崮小流域为研究对象,通过监测2010年自然降雨条件下流域出口污染物的流失状况,选取降雨量>2mm的10场降雨,分析降雨径流特征对磷素流失的影响.结果表明,次降雨径流中总磷(TP)、颗粒态全磷(PP)、水溶性全磷(DP)、水溶性无机磷(DIP)浓度变化与流量变化过程不一致,浓度峰值均出现于流量峰值之前,而磷素通量与流量变化过程较为一致,且两者呈较好的线性关系;次降雨径流TP、PP、DP、DIP的浓度最大值及平均浓度(EMCs)差异均较大,其主要受降雨量、最大雨强和平均雨强影响,与降雨历时无显著相关关系,而浓度最小值差异较小;TP以PP流失为主,DP以DIP流失为主,DIP/DP的动态变化与降雨历时、降雨量、最大雨强和平均雨强均无显著相关关系,而PP/TP的动态变化与最大雨强显著相关.DIP、DP、TP的输出受地表径流(DR)和基流(BF)的影响较大,DIP/DP的动态变化及DIP、DP、TP的EMCs与DR/TR(地表径流/总径流量)存在多项式关系,而PP/TP的动态变化和PP的EMCs受DR/TR影响较小.     

直接大红4BE的磷钨酸均相光催化还原脱色

以磷钨酸(H3PW12O40,PW12)为光催化剂,异丙醇(Isopropanol)作为电子给体的条件下对偶氮染料直接大红4BE进行均相光催化还原脱色研究,考察PW12用量、IS浓度、直接大红4BE和盐浓度等因素的影响,结果表明杂多蓝(PW1-2)对直接大红4BE具有明显的还原脱色作用.pH=2.0,直接大红4BE初始浓度50 mg·L-1,PW12浓度为600 mg·L-1,IS浓度为0.13mol·L-1,50 min直接大红4BE的脱色率可达到90.39%.4BE的光催化还原脱色速率随PW12和IS浓度的增加而增加,最后趋于恒定;直接大红4BE初始浓度增加,其光反应一级速率常数降低;PW12、IS和4BE浓度之间存在交互影响.离子强度增加,4BE脱色速率减小,表现为负的盐效应,推测4BE与光反应生成的杂多蓝(PW1-2)进行复合,然后发生电子转移引起偶氮染料还原脱色和杂多蓝氧化复原.本研究结果表明PW12/IS/UV能够有效用于偶氮染料直接大红4BE的还原脱色处理.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

站控、通信及网络系统的防雷措施

论述了输油泵站控制系统及微波通信系统遭受雷击的危害及原因,有针对性地采取了各种防雷的有效措施,完善微波通讯和站控及网络防雷保护系统,为确保输油安全生产提供了有利保证.     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.     

Imperatives for attracting investment and technology in the Indian mining sector

In India, the mineral resource inventory and the production of a large number of important minerals have registered significant increases during the last few decades. Yet the country continues to be a net importer of many high value and scarce minerals and metals, like gold, diamond, and several base metals. Exploration and development of the resources of these minerals are technology- and capital-intensive. To bring technology and capital through foreign direct investment (FDI) into the Indian mineral sector, it is imperative to lay stress on: accurate resource estimation and categorization, as well as realistic projection of the true values; rationalization of legislative measures based on R&D studies and reorganization of the implementation machinery; conducive tax structure; notification of acts and rules applicable to offshore mineral resources; time-frames for granting licences and leases; encouragement to labor productivity by rationalizing labor laws; reforms in the monetary system to increase market competitiveness of Indian minerals; and judicial reforms. FDI in the Indian mineral sector is important to firm up the knowledge-base of mineral resources and their optimum exploitation.     

环境水样阴离子表面活性剂光度测定法

本文通过实验研究,提出了对河水及生活废水阴离子表面活性剂的水相直接测定方法,此方法具有简便、快速的特点,且有良好的准确性和再现性。     

基于视频识别的直接作业环节安全管控

概述了石化行业现场直接作业环节的安全管控现状,分析了现场管控过程中存在的问题。考虑现场安全管理和监督监控的实际需要,设计了石化行业直接作业现场智能化管控系统,并深入研究作业现场违章行为图像识别的关键技术。现场应用表明,系统充分体现了日常管理、实时监控、智能报警、统计分析等方面的便利性和有效性,各类违章行为图像识别准确率达到80%以上,具有一定的推广价值。