CuBr2分解缓释-膜催化对零价汞的氧化性能研究

以置于多孔陶瓷膜中的CuBr2受热分解所释放的Br2为氧化剂,利用膜催化装置对Hg0氧化效率进行研究,并设计反应-就地检测一体化装置,避免下游气体管壁效应对实验结果带来的影响.结果表明,MnO x/α-Al2O3催化膜对CuBr2分解所产生Br2的释放有较好的"缓释"作用.Hg0和Br2在催化膜表面的吸附和反应可用Langmuir-Hinshelwood机制描述.Hg0氧化效率随Br2浓度增大而升高,但在达到一定浓度后,Hg0和Br2的吸附速率及两者在催化膜表面的反应速率成为限速因素.473~573 K时Hg0氧化效率变化较稳定.烟气中SO2对Hg0氧化有一定抑制作用,NO无明显影响.     

A comparative study and evaluation of sulfamethoxazole adsorption onto organo-montmorillonites

Three organo-montmorillonites were prepared using surfactants, and their adsorption behaviors toward sulfamethoxazole（SMX） were investigated. The surfactants used were cetyltrimethyl ammonium bromide（CTMAB）, 3-（N,N-dimethylhexadecylammonio） propane sulfonate（HDAPS） and 1,3-bis（hexadecyldimethylammonio）-propane dibromide（BHDAP）. The properties of the organo-montmorillonites were characterized by X-ray diffraction, scanning electron microscopy and N2adsorption–desorption isotherm measurements. Results showed that the interlayer spacing of montmorillonite was increased and the surface area as well as the morphology were changed. Batch adsorption experiments showed that the surfactant loading amount had a great effect on the adsorption of SMX. The adsorption process was p H dependent and the maximum adsorption capacity was obtained at p H 3 for HDAPS-Mt, while CTMAB-Mt and BHDAP-Mt showed a high removal efficiency at 3–11. The adsorption capacity increased with the initial SMX concentration and contact time but decreased with increasing solution ionic strength.Kinetic data were best described by the pseudo second-order model. Equilibrium data were best represented by the Langmuir model, and the Freundlich constant（n） indicated a favorable adsorption process. The maximum adsorption capacity of SMX was 235.29 mg/g for CTMAB-Mt, 155.28 mg/g for HDAPS-Mt and 242.72 mg/g for BHDAP-Mt. Thermodynamic parameters were calculated to evaluate the spontaneity and endothermic or exothermic nature. The adsorption mechanism was found to be dominated by electrostatic interaction,while hydrophobic interaction played a secondary role.     

Adsorption of humic acid from aqueous solution on bilayer hexadecyltrimethyl ammonium bromide-modified zeolite

Surfactant-modified natural zeolites (SMNZ) with different coverage types were prepared by loading hexadecyltrimethyl ammonium bromide (HTAB) onto the surface of a natural zeolite. The adsorption behavior of humic acid (HA) on SMNZ was investigated. Results indicate that the adsorbent SMNZ exhibited a higher affinity toward HA than the natural zeolite. HA removal efficiency by SMNZ increased with HTAB loading. Coexisting Ca²⁺ in solution favored HA adsorption onto SMNZ. Adsorption capacity decreased with an increasing solution pH. For typical SMNZ with bilayer HTAB coverage, HA adsorption process is well described by a pseudo-second-order kinetic model. The experimental isotherm data fitted well with the Langmuir model. Calculated maximum HA adsorption capacities for SMNZ with bilayer HTAB coverage at pH 5.5 and 7.5 were 63 and 41 mg·g^-1, respectively. E2/E3 (absorbance at 250 nm to that at 365 nm) and E4/E6 (absorbance at 465 nm to that at 665 nm) ratios of the residual HA in solution were lower than that of the original HA solution. This indicates that the HA fractions with high polar functional groups, low molecular weight (MW), and aromaticity had a stronger tendency for adsorption onto SMNZ with bilayer HTAB coverage. Results show that HTAB-modified natural zeolite is a promising adsorbent for removal of HA from aqueous solution.     

阳离子表面活性剂十六烷基三甲基溴化铵（CTAB）对磷钨酸(PW12)光催化还原降解偶氮染料直接耐晒黑G的影响

以磷钨酸H3PW12O4（PW12）为光催化剂,异丙醇（IS）作为电子给体,研究阳离子表面活性剂十六烷基三甲基溴化铵（CTAB）对PW12光催化还原降解直接耐晒黑G（DB19）的影响.考察了CTAB浓度、pH值、DB19初始浓度等因素对反应的影响,并采用一级反应动力学对反应过程进行分析.结果表明CTAB增强了PW12对直接耐晒黑G的还原脱色作用,CTAB浓度增加,DB19的光催化脱色速率提高.PW12用量对DB19还原脱色的影响程度和趋势与溶液中CTAB浓度有关,当CTAB浓度为0.10 mmol.L-1时,DB19的脱色速率随PW12用量的增加而增加;CTAB浓度为0.05 mmol.L-1,PW12用量为200 mg.L-1时DB19的脱色速率最快,继续增加反而降低.DB19还原脱色速率随其初始浓度升高而降低.另外,通过循环伏安法和暗反应明确还原态杂多蓝对染料的还原脱色作用,并借助UV-Vis光谱研究DB19、PW12、CTAB之间的相互作用,探索CTAB对PW12/IS光催化还原降解DB19的作用机理.该研究结果表明阳离子表面活性剂CTAB能够增强偶氮染料废水的PW12催化还原脱色处理.     

溴化十四烷基吡啶对膨润土吸附萘的增强效应及机理

研究了溴化十四烷基吡啶(MPB)对膨润土吸附萘的增强效应、机理及影响因素,试图为有机膨润土在污染环境修复中的应用提供新的技术路线.结果表明,MPB能显著增强膨润土对萘的吸附作用,增强效应及机理与MPB浓度有关.当MPB平衡浓度(X)在0～1/10CMC之间,MPB几乎全部被膨润土吸附,对萘产生分配作用,其表观分配系数(K_d^*)随MPB加入量的增大而急剧增大;当X在1/10CMC～ICMC之间,由于表面活性剂的吸附作用及其单体的增溶作用,K_d^*值则缓慢减小;当X大于1CMC,由于增加的表面活性剂主要起胶束增溶作用,K_d^*值则急剧减小.引入了标化表观分配系数(K_oc^*)探讨萘在表面活性剂-膨润土-水体系中的吸附机理,其倒数(1/K_oc^*)与X呈线性关系;由线性斜率和截距可求得K_oc、K_mn、K_mc参数.     

溴化1-丁基-3-甲基咪唑离子液体在空心菜中的吸收积累特性及其毒理效应

通过营养液水培的方式,研究了在不同浓度溴化1-丁基-3-甲基咪唑([C4mim]Br)对空心菜的毒性效应,测定了[C4mim]Br对空心菜各生长指标、叶绿素含量、丙二醛(MAD)含量以及根系活力的变化情况,同时研究了空心菜对[C4mim]Br的吸收和体内积累特征。结果表明:随着[C4mim]Br处理浓度与培养时间的增加,[C4mim]Br对空心菜各生理生化指标有显著抑制作用,且抑制效应具有剂量依赖型特点,半最大效应浓度(EC_(50))值为1.64 mg·L~(-1)。空心菜体内丙二醛含量显著增加表明[C4mim]Br加剧了细胞膜受损,导致根系对[C4mim]Br的吸收积累能力下降。空心菜的富集系数与转运系数均小于1,表明空心菜可以从环境中吸收并积累[C4mim]Br,但从根到地上部分转运[C4mim]Br能力较弱。     

表面活性剂光催化降解动力学研究

为了研究光催化法对不同电荷类型表面活性剂的降解性能,在紫外光照射下,用TiO2光催化剂对阴离子表面活性剂十二烷基磺酸钠(SDS)、阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)和两性表面活性剂十八烷基甜菜碱(BS18)进行降解试验.同时,探讨了TiO2光催化剂加入量、表面活性剂初始质量浓度及初始pH对光降解的影响及其动力学过程.结果表明,3种表面活性剂的降解行为符合准一级动力学规律,3种表面活性剂降解速率快慢顺序为:BS18CTABSDS.SDS和BS18的最佳TiO2催化剂用量为1 g.L-1,而CTAB的最优用量为2g.L-1;CTAB和BS18的光降解速率随着活性剂初始质量浓度的增大而线性减小,SDS的降解速率则随活性剂初始质量浓度的增加而缓慢增大;CTAB和BS18在偏碱性条件下降解最快,而SDS在弱酸条件下具有最大的动力学降解速率.     

关于气相色谱法测定水中丙烯酰胺的研究

研究并建立了毛细柱气相色谱-微池电子捕获检测器测定水中丙烯酰胺的方法。水样中丙烯酰胺经溴化衍生后,用乙酸乙酯萃取,经气相色谱法分析,取l00ml水样时方法检出限为0．017μg／L。丙烯酰胺在0．50～12．50μg／L范围内线性良好,在低、中、高3个添加水平,平均加标回收率为99．3％～114％,相对标准偏差为0．4％-3．5％。本方法准确度高、精密度好,适用于水中丙烯酰胺测定。     

含溴黄浦江水消毒过程中溴代三卤甲烷和卤乙酸的生成特性

通过水厂出水DBPs调查和氯化培养实验探讨了黄浦江水中溴离子（Br-）在消毒过程中的迁移及对含溴副产物（溴代三卤甲烷和卤乙酸）生成的影响.结果表明,采用氯胺消毒的水厂出水中约10%的Br-迁移至Br-THMs和Br-HAAs.氯化培养时,在余氯充足的前提下增加Br-浓度,总有机溴（TOBr）和含溴副产物均增加.延长氯化...     

水加氯处理时NHCl2与溴化物的反应特性研究

含氨水进行氯化处理时会产生ＮＨ２Ｃｌ和ＮＨＣｌ２,当水中含有溴化物时,氯胺类会与会中的Ｂｒ＾－反应,ＮＨ２Ｃｌ与Ｂｒ＾－的反应速度随ｐＨ增加和Ｂｒ＾－浓度降低而减慢;ＮＨＣｌ２与溴化物的反应比较复杂,２者的反应存在着一个诱导期,诱导期的长短与Ｂｒ＾－浓度对数成反比,ＮＨＣｌ２与Ｂｒ＾－的反应速度对ＮＨＣｌ２为一级反应;用紫外光谱,气相色谱和疏水微孔渗透法研究了该反应产物,确认反应产物为Ｂｒ＾－的反