水质氨氮在线监测仪对污染源低浓度样品测定的研究

水质氨氮在线监测仪广泛用于各类水体中氨氮的在线监测,随着我国水质氨氮减排工作的开展,污染源废水中氨氮浓度逐渐降低,目前市场上的水质氨氮在线监测仪是否适用于低浓度氨氮样品的在线监测成为广大环保工作者关心的问题。选取3种不同类型的水质氨氮在线监测仪分别进行低浓度标样和实际水样测试,并对结果进行了讨论。     

青藏高原淡水湖泊水化学组成特征及其演化

青藏高原淡水湖具有高生态价值和高脆弱性并存的特点.以海拔5 080 m±10 m的打加芒错湖水为研究对象,测试及分析了湖水化学组分,探讨了其主要离子来源、控制因子和湖泊水化学演化趋势.结果表明,湖水阳离子以Ca2+和Na+为主,阴离子以HCO3-为主,为HCO3-Ca型水;TDS为71.2～199.8 mg·L-1,矿化度低;受地表径流的稀释作用和富铝贫钙的地质背景约束湖区东南部水体的EC、Ca2+和HCO3-浓度均较低.湖水的Na+/(Na++Ca2+)为0.08～0.75,Cl-/(Cl-+HCO3-)为0.11～0.35,Ca/Na值为0.58,Mg/Ca值为0.12,HCO3/Na值为1.46,据Gibbs模型和元素化学计量分析表明,其化学组成主要受硅酸盐岩风化控制.湖区流域参与风化的矿物岩石包括斜长石(钙长石、钠长石)、钾长石、云母、石膏、盐岩等,但以斜长石风化为主,湖水的K/Na值平均为0.059,表明流域钾长石风化程度较低.湖水中方解石、白云石、石英、石膏等矿物饱和指数(SI)大于0,石盐的SI则小于0,揭示了青藏高原上淡水湖泊演变成咸水湖的变化趋势.     

液相微萃取-气质联用法测定扎龙水样中增塑剂

采用液相微萃取前处理方法与气相色谱—质谱联用技术相结合对扎龙水样中增塑剂进行测定。     

大气颗粒物来源解析

内涵解析何谓大气颗粒物来源解析?大气颗粒物来源解析是指通过化学、物理学、数学等方法定性或定量识别环境受体中大气颗粒物污染的来源。这是一项长期复杂且系统的技术性工作,涉及多种技术方法、模型选择、样品采集与分析、化学成分谱的科学构建、模拟运算以及解析结果评估与应用等,是科学、有效开展颗粒物污染防治工作的基础和前     

汽车报废破碎 资源回收率须9成

正根据商务部要求,由中国汽车技术研究中心组织起草的《报废汽车破碎技术规范》行业标准征求意见稿近日公布并公开征求意见,意见反馈截止日期为2014年5月30日。拟定中的技术规范提出,汽车报废破碎分选后,可再生资源综合回收率将不低于90%。今后,汽车报废破碎厂区不应位于饮用水源保护区、基本农田保护区或其他需要特别保护的区域,作业场地面积不低于20 000 m2,并配备收集污水的排水沟、油水分离等污水处理装置。通过设备分选或人     

应用新型好氧堆肥反应器连续投加处理人粪便的研究

针对间歇式堆肥反应器处理效率低、不便移动、单次投加所需物料量大等不足,以及为更有效地处理分散型人粪便,使人粪便资源化,开发了梨形筒式好氧堆肥反应器。在获得该反应器的最佳通风与搅拌频率分别为3.0 L/min,5 min/h以及最佳m（粪便）︰m（锯末）为1︰2.5的条件下进行连续投加人粪便好氧堆肥。在不接种微生物的30 d堆制过程中,升-降温周期为36 h,平均温度为51.44℃,第15天时COD降解率达到63.99%并趋于稳定,TN损失率第17天时达到56.68%,GI于第21天时达到106.25%,堆肥完全腐熟,稳定期处理效率为23.81 g/（L·d）。接种土著菌种时,升-降温周期缩短至24 h,平均温度为53.96℃,COD降解率8 d可达65.28%,TN 损失率仅为25.75%,GI于第8天达到108.22%,稳定期处理效率可达35.71 g/（L·d）,比不接种时提高1.5倍,同时节约能耗50%。     

环境样品中甲基汞测定方法的研究进展

甲基汞可通过血脑屏障引起中枢神经系统永久性损伤,毒性很强,因此环境样品中甲基汞的准确测定具有重要意义。文章对近年来环境样品中甲基汞的提取与富集技术及分析测定方法进行了归纳和总结。系统介绍了酸/碱提取、微波/超声辅助提取等样品前处理方法及其溶剂萃取等富集方法。通过比较分析,总结了不同环境样品适用的前处理方法。同时,对各色谱-质谱/光谱联用方法在甲基汞测定时的应用进行了归纳和比较。全自动形态汞/总汞分析仪(MERX)将环境样品中甲基汞的富集与分析有机结合,实现了环境样品中甲基汞的富集和分离与定量分析的一体化,提高了分析效率,是值得推荐的方法。     

改进磷钼酸喹啉重量法测定复混肥料中P_2O_5含量的称样过程研究

磷钼酸喹啉重量法测定复混肥料中有效磷含量的称样过程规定用滤纸包裹试样,滤纸原料来源于天然有机物体,其成分可能含有微量磷。测定过程中,滤纸会引入试剂误差。对去包裹称样法的可行性及其影响进行实验研究,结果表明,改进后称样法降低了实验误差,实验结果的准确度及精密度均可达到《复混肥料中有效磷的测定》(GB/T 8573-2010)的要求。     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.