The Impact of Projected Climate Change Scenarios on Nitrogen Yield at a Regional Scale for the Contiguous United States

Improved understanding of the potential regional impacts of projected climatic changes on nitrogen yield is needed to inform water resources management throughout the United States (U.S.). The objective of this research is to look broadly at watersheds in the contiguous U.S. to assess the potential regional impact of changes in precipitation (P) and air temperature (T) on nitrogen yield. The SPAtially Referenced Regression On Watershed attributes model and downscaled P and T outputs from 14 general circulation models were used to explore impacts on nitrogen yield. Results of the analysis suggest that projected changes in P and T will decrease nitrogen yield for the majority of the contiguous U.S., including the watersheds of the Chesapeake Bay and Gulf of Mexico. Some regions, however, such as the Pacific Northwest and Northern California, are projected to face climatic conditions that, according to the model results, may increase nitrogen yield. Combining the projections of climate‐driven changes in nitrogen yield with projected changes in watershed nitrogen inputs could help water resource managers develop regionally specific, long‐term strategies to mitigate nitrogen pollution.     

A reassessment of energy and GDP relationship: the case of Australia

This paper investigates the long- and short-run relationships between energy consumption and economic growth in Australia using the bound testing and the ARDL approach. The analytical framework utilized in this paper includes both production and demand side models and a unified model comprising both production and demand side variables. The energy–GDP relationships are investigated at aggregate as well as several disaggregated energy categories, such as coal, oil, gas and electricity. The possibilities of one or more structural break(s) in the data series are examined by applying the recent advances in techniques. We find that the results of the cointegration tests could be affected by the structural break(s) in the data. It is, therefore, crucial to incorporate the information on structural break(s) in the subsequent modelling and inferences. Moreover, neither the production side nor the demand side framework alone can provide sufficient information to draw an ultimate conclusion on the cointegration and causal direction between energy and output. When alternative frameworks and structural break(s) in time series are explored properly, strong evidence of a bidirectional relationship between energy and output can be observed. The finding is true at both the aggregate and the disaggregate levels of energy consumption.     

Bubble size distribution in a laboratory-scale electroflotation study

The performance of electroflotation (EF) is strongly influenced by the size of O₂ and H₂ bubbles. Therefore, in this study, the bubble sizes are measured in a lab-scale EF cell using a high-speed camera. The mean bubble size is found to vary in the range of 32.7–68.6 μm under different operating conditions. This study shows that the electrode material, current density, water pH, ionic strength, and frother (Tennafroth 250) concentration are important factors in controlling the bubble size. Furthermore, four mathematical distributions (normal, log-normal, Weibull, and gamma distributions) are fitted to the experimental data, among which the log-normal distribution is found to be the best fit based on the lower Anderson-Darling (AD) value.     

Organochlorine, PCB, PAH, and metal concentrations in eggs of loggerhead sea turtles (Caretta caretta) from northwest Florida, USA

Composite samples of unhatched and physically unaltered loggerhead sea turtle, Caretta caretta, eggs collected from 20 nests along northwest Florida were analyzed for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and metals. Chemical analyses revealed that turtle eggs contained detectable amounts of metals, PAHs, and PCBs. Only one OCP, p,p'-DDD, was detected, and its presence was restricted to eggs from two nesting sites. None of the PCB concentrations exceeded the Food and Drug Administration's (FDA) action limit. Concentrations of dioxin-like PCB congeners, 105, 118, and 126, and total PCBs were also detected and are contributors to the toxic burden of loggerhead sea turtle eggs. Concentrations of PAHs, 1,2,5,6-dibenzanthracene, 1-methyl naphthalene, C1-naphthalene and naphthalene were variable at nesting sites. Comparison of mean metal burdens in eggs from different beaches suggested that no uniform geographic gradients exist. Presence of OCPs, PCBs, PAHs and metals and their additive or synergistic toxicity is a concern to loggerhead sea turtle eggs; however, additive or synergistic impacts for loggerhead sea turtles are largely undocumented.     

Experimental study of cross-flow wet electrostatic precipitator

This paper reports development and testing of a novel cross-flow wet electrostatic precipitator (WESP), recently patented at Ohio University, that utilizes vertical columns of permeable material in the form of polypropylene ropes placed in a cross-flow configuration within a flue gas stream. The cross-flow design has large surface area, which provides scrubbing action; therefore, it has the potential for removing multiple pollutants, including particulates, gases, vapors, and mists. In this new method, the ropes are kept wet by the liquid (water) introduced from the top of the cells running downward on the ropes by capillary action, making the permeable materials act as the ground electrode for capturing particles from the flue gas. Preliminary testing has shown an efficiency of well above 80% using two cells and three sets of discharge electrodes. Since the material of construction is primarily corrosion-resistant polymeric material, both weight and cost reductions are expected from this new design.

Implications: The newly invented cross-flow WESP exhibit particulate collection efficiency of well above 80% when introduced in particulate-laden exhaust flow. This value was obtained using a two cells and three discharge electrodes configuration. The electric field strength has a substantial effect on the collection efficiency. Also, the pressure drop test results indicate that there is a potential to increase the collection area, which, in turn, will increase the collection efficiency further.     

Droplet size spectra and deposits of Bacillus thuringiensis aerial sprays,following application at two volume rates over an oak forest

Abstract

Dipel® 8AF, a commercial formulation of Bacillus thuringiensis (B.t.) was sprayed undiluted at 30 BIU in 1.8L/ha over a block B1, and sprayed after dilution with water at 30 BIU in 6.2 L/ha over another block B2 in an oak forest infested with the gypsy moth (Lymantria dispar L.) in southeastern Ontario, Canada. Spray was applied in May 1987 using a Cessna 188 Agtruck aircraft equipped with four Hicronair^® AU4000 atomizers. Droplet sizes were measured at mid‐canopy level of oak trees and at ground level using cylindrical Kromekote® cards. Deposit per unit area was assessed on aluminum oak leaves.

At the lower volume rate of 1.8 L/ha, spray droplets were smaller and droplets/cm² were lower on the cylindrical Kromekote cards in B1 than those obtained in B2 which received the higher volume rate of 6.2 L/ha. The average deposit per unit area of the aluminum oak leaves, expressed in nL of the spray volume per cm² surface area, was also correspondingly lower in B1 than in B2. This was attributed to the higher volume rate of spray application used in B2 than in B1, which resulted in larger droplets and a greater volume deposit/cm² in B2.     

Physicochemical characterization of industrial effluents and their effect on fish survival

Abstract

Water samples taken from selected industrial drainages and receiving streams in and around Islamabad, Pakistan, during the summers of 1987 to 1990 showed disturbances in pH and low oxygen levels. Selected metals (Fe, Pb, Zn, Cd, Cu, Ni, Hg) were higher in all effluents than in receiving waters. Static bioassays of the undiluted industrial effluents from three sites caused 100% mortality in carp during the first 24 hrs. Fishes also suffered 30 to 60% mortality when exposed to other undiluted industrial effluents and some mortality when industrial effluents were diluted by 50%.     

Dissipation kinetics of tetraconazole in three types of soil and water under laboratory condition

Laboratory experiment was conducted to understand the persistence behavior of tetraconazole in three soils of West Bengal (alluvial, red lateritic, and coastal saline) and also in water maintained at three different pH (4.0, 7.0, and 9.2) conditions. Processed soil samples (100 g) were spiked at two treatment doses: 2.5 μg/g (T₁) and 5.0 μg/g (T₂). Double distilled buffered water (200 ml) was spiked at two treatment doses: 1.0 μg/ml (T₁) and 2.00 μg/ml (T₂). The tetraconazole dissipation followed first-order reaction kinetics and the residual half-life (T _1/2) values in soil were found to be in the range of 66.9–77.2 days for T₁ and 73.4–86.0 days for T₂. The persistence increased in the order red lateritic > new alluvial > coastal saline. Interestingly, the red lateritic soil exhibited the lowest pH (5.56) and organic carbon (0.52 %) content as compared to other two soils. However, the dissipation of tetraconazole in case of water was not pH dependant. The T _1/2 values in water were in the range of 94 to 125 days. The study indicated the persistent nature of tetraconazole in soil and water.     

Optimization of digestion parameters for analysing the total sulphur of mine tailings by inductively coupled plasma optical emission spectrometry

The oxidation of sulphidic mine tailings and consequent acid generation poses challenges for the environment. Accurate and precise analysis of sulphur content is necessary for impact assessment and management of mine tailings. Here, the authors aim at developing a rapid and easy digestion procedure, which may analyse and measure the total amount of sulphur in mine tailings by using inductively coupled plasma. For evaluating effects of several variables, the researchers used a univariate (analysis of variance (ANOVA)) strategy and considered factors such as composition of the acid mixture, heating time, and refluxing device to optimize the performance. To do the experiment, the researchers have used two certified reference materials (KZK-1 and RTS-2) and samples of tailings from Musselwhite mine. ANOVA result shows that heating time is the most influencing factor on acid digestion of the reference materials whereas in case of a digestion of tailings sample, hydrochloric acid proved to be the most significant parameter. Satisfactory results between the measured and referenced values are found for all experiments. It is found that the aqua regia (1 ml HNO₃ + 3 ml HCl) digestion of 0.1 g of samples after only 40 min of heating at 95°C produced fast, safe, and accurate analytical results with a recovery of 97% for the selected reference materials.     

Environmental implications of soil remediation using the Fenton process

This work evaluates some collateral effects caused by the application of the Fenton process to 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) and diesel degradation in soil. While about 80% of the diesel and 75% of the DDT present in the soil were degraded in a slurry system, the dissolved organic carbon (DOC) in the slurry filtrate increased from 80 to 880mgl(-1) after 64h of reaction and the DDT concentration increased from 12 to 50microgl(-1). Experiments of diesel degradation conducted on silica evidenced that soluble compounds were also formed during diesel oxidation. Furthermore, significant increase in metal concentrations was also observed in the slurry filtrate after the Fenton treatment when compared to the control experiment leading to excessive concentrations of Cr, Ni, Cu and Mn according to the limits imposed for water. Moreover, 80% of the organic matter naturally present in the soil was degraded and a drastic volatilization of DDT and 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene was observed. Despite the high percentages of diesel and DDT degradation in soil, the potential overall benefits of its application must be evaluated beforehand taking into account the metal and target compounds dissolution and the volatilization of contaminants when the process is applied.