CSHM: Web-based safety and health monitoring system for construction management

INTRODUCTION: This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. METHOD: The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. RESULTS: The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. IMPACT ON INDUSTRY: As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.     

Estimates of health benefits due to reductions in ambient NO2 levels

A method is presented here by which the actual numbers of individuals in the U.S. population who would be expected to suffer respiratory illness as a result of exposure to ambient nitrogen dioxide (NO₂) concentrations in excess of the Federally-designated ambient air quality standard can be estimated. At the same time we have attempted to quantify how these adverse health effects would be alleviated by various degrees of reductions in current ambient concentrations. In addition, the health benefit expected to be derived by various NO_x emission control strategies will be examined utilizing the health benefit estimation method presented.It is estimated that there were approximately 33.2×10⁶ excess cases of respiratory illnesses in the U.S. in 1973 associated with ambient NO₂ concentrations in excess of the national ambient standard. A reduction of approximately 50 to 60 percent below 1973 NO₂ levels is needed to essentially eliminate excess respiratory illness associated with ambient NO₂ concentration.     

Assessment of population exposure to particulate matter pollution in Chongqing, China

To determine the population exposure to PM(10) in Chongqing, China, we developed an indirect model by combining information on the time activity patterns of various demographic subgroups with estimates of the PM(10) concentrations in different microenvironments (MEs). The spatial and temporal variations of the exposure to PM(10) were illustrated in a geographical information system (GIS). The population weighted exposure (PWE) for the entire population was 229, 155 and 211 microg/m(3), respectively, in winter, summer and as the annual average. Indoor PM(10) level at home was the largest contributor to the PWE, especially for the rural areas where high pollution levels were found due to solid fuels burning. Elder people had higher PM(10) exposure than adults and youth, due to more time spent in indoor MEs. The highest health risk due to particulate was found in the city zone and northeast regions, suggesting that pollution abatement should be prioritized in these areas.     

Sustainability, substance flow management and time. Part I Temporal analysis of substance flows

Flows of chemical substances need to be managed in a sustainable way. Sustainable development as a whole and the sustainable management of substance flows in particular are both time issues. These include the importance of the dynamics of substance flows and the way these interconnect with the use of resources, the avoidance of environmental pollution, and their effects on health and food production. Another prerequisite for the proper management of substance flows is justice within and between generations. This requires a systematic approach and a systematic analysis of the issues as well as of the actions to be taken. One tool for such a systematic approach is temporal analysis. It brings the temporal aspects of the substances themselves and of their intended use, as well as factors affecting the stakeholders, such as decision makers, producers and consumers, into focus. In the past, timing factors were rarely taken into account. Knowledge of the temporal dynamics of substance flows and their resultant outcomes, as well as of their interaction with ecological, economic and social systems, is a basic requirement for successful substance flow management. The need to include temporal aspects into substance flow management and how to do so is outlined here. Included are not only politicians but also practitioners and scientists who must explicitly take into account adequate time scales, points in time, breaks and other forms of time in planning and acting.     

Health risks of heavy metals in contaminated soils and food crops irrigated with wastewater in Beijing, China

Consumption of food crops contaminated with heavy metals is a major food chain route for human exposure. We studied the health risks of heavy metals in contaminated food crops irrigated with wastewater. Results indicate that there is a substantial buildup of heavy metals in wastewater-irrigated soils, collected from Beijing, China. Heavy metal concentrations in plants grown in wastewater-irrigated soils were significantly higher (PHealth Organization (WHO). Furthermore, this study highlights that both adults and children consuming food crops grown in wastewater-irrigated soils ingest significant amount of the metals studied. However, health risk index values of less than 1 indicate a relative absence of health risks associated with the ingestion of contaminated vegetables.     

A review of Australian approaches for monitoring,assessing and reporting estuarine condition: II. State and Territory programs

In contrast to Europe, the USA and South Africa, Australia has no specific, overarching federal legislation to underpin a nationally-coordinated framework for monitoring, assessing and reporting estuarine condition. This has resulted in a complex mosaic of diverse approaches and governance structures, hindering the ability to make inter-State comparisons. In this second part of a comprehensive three-part review, we present a systematic appraisal of current and impending approaches for measuring and reporting estuarine condition in each of Australia’s States and Territories. A concise summary is provided in each case, supported by extensive appendices containing detailed accounts of relevant monitoring and reporting programs. We synthesise and evaluate this output at the State/Territory level, highlighting areas of improvement and major gaps.     

Extended impacts of climate change on health and wellbeing

Anthropogenic climate change is progressively transforming the environment despite political and technological attempts to reduce greenhouse gas emissions to tackle global warming. Here we propose that greater insight and understanding of the health-related impacts of climate change can be gained by integrating the positivist approaches used in public health and epidemiology, with holistic social science perspectives on health in which the concept of ‘wellbeing’ is more explicitly recognised. Such an approach enables us to acknowledge and explore a wide range of more subtle, yet important health-related outcomes of climate change. At the same time, incorporating notions of wellbeing enables recognition of both the health co-benefits and dis-benefits of climate change adaptation and mitigation strategies across different population groups and geographical contexts. The paper recommends that future adaptation and mitigation policies seek to ensure that benefits are available for all since current evidence suggests that they are spatially and socially differentiated, and their accessibility is dependent on a range of contextually specific socio-cultural factors.     

Source identification, contamination status and health risk assessment of heavy metals from road dusts in Dhaka, Bangladesh

In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10⁻⁹ to 10⁻¹¹ showed no carcinogenic health risk by road dusts contaminated with the heavy metals.     

A review of Australian approaches for monitoring,assessing and reporting estuarine condition: III. Evaluation against international best practice and recommendations for the future

In this final component of a three-part review, we present a national synthesis and evaluation of approaches for monitoring, assessing and reporting estuarine condition across Australia. Progress is evaluated against objective criteria that together provide a model of international best practice. We critically assess the limitations, inconsistencies and gaps that are evident across Australian jurisdictions, and identify common obstacles to future progress. Major strengths and successes are also highlighted, together with specific examples of best practice from around Australia that are transferable to other States and beyond. Significant obstacles to greater national coordination of monitoring and reporting practices include inconsistent spatial scales of management, pluralistic governance structures and the lack of any overarching legislation. Nonetheless, many perceptible advances have been made over the last decade across Australia in estuarine monitoring and health assessment, and there is great potential for further progress. Finally, we provide a list of recommendations to address some of the most pressing limitations and gaps, and support improved future monitoring, assessment and reporting for Australian estuaries.     

Development and application of LC–APCI–MS method for biomonitoring of animal and human exposure to imidacloprid

Imidacloprid (IMI) is a relatively new neuro-active neonicotinoid insecticide and nowadays one of the largest selling insecticides worldwide. In the present study a LC–APCI–MS based method was developed and validated for the quantification of imidacloprid and its main metabolite 6-chloronicotinic acid (6-CINA) in urine and hair specimens. The method was tested in biomonitoring of intentionally exposed animals and subsequently applied for biomonitoring of Cretan urban and rural population.