普伐他汀的光催化降解性能及机理研究

通过水热法合成Bi₂WO₆,并利用XPS,XRD,BET,UV-Vis和SEM等方法对样品进行了表征;通过光催化性能实验考察了Bi₂WO₆投加量,溶液pH值对普伐他汀（PR）降解效果的影响;通过自由基捕获实验及中间产物的鉴定探明了Bi₂WO₆光催化降解PR过程的主要活性自由基,中间产物及降解机理,并采用发光细菌急性毒性试验评估了PR降解前后的毒性.结果表明,所制备的Bi₂WO₆是由大量纳米片组成的正交晶系花瓣状微球,各元素物质的量比为Bi：W：O=2.5：1：6.7,比表面积为26.67m²/g,带隙能为2.74eV;光催化性能结果表明,对于10mg/L PR,当溶液pH=6.5,Bi₂WO₆投加量为0.4g/L时降解效果最佳,降解率可达80.6%,矿化度为40.2%;自由基捕获实验结果表明降解过程中h⁺起主要的氧化作用,·OH和·O₂^-的氧化起辅助作用.基于活性自由基和中间产物的鉴别结果提出了Bi₂WO₆光催化降解PR的机理,即以h⁺为主,·OH和·O₂^-为辅联合攻击PR分子中C－C键,C＝C双键,酯键等化学键,进而将其分解为易降解小分子有机物.另外,毒性测试结果表明PR经光催化降解后的小分子产物与PR原液相比毒性并没有增强.     

The effects of autophagy on vascular endothelial cells induced by airborne PM2.5

The purpose of this study was to examine the direct toxicity of PM2.5 collected from Beijing on human umbilical vein endothelial cells(HUVEC). A Cell Counting Kit 8(CCK8) assay demonstrated that PM2.5 exposure decreased the proliferation of HUVECs in a dosedependent manner. We also found that PM2.5 exposure induced autophagy in HUVECs, as evidenced by:(1) an increased number of double-membrane vesicles;(2) enhanced conversion and punctuation of the microtubule-associated protein light chain 3(LC3); and(3) decreased levels of the selective autophagy substrate p62 in a time-dependent manner.Furthermore, promoting autophagy in PM2.5-exposed HUVECs with rapamycin increased the cell survival rate, whereas inhibiting autophagy via 3-methyladenine significantly decreased cell survival. These results demonstrate that PM2.5 exposure can induce cytotoxicity and autophagy in HUVECs and that autophagy play a protective role against PM2.5-induced cytotoxicity. The findings of the present study imply a direct toxic effect of PM2.5 on HUVECs and provide novel insight into the mechanism of cardiovascular diseases caused by PM2.5 exposure.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

纳米TiO2/CNTs复合材料的制备及其光学性质

TiO2在碳纳米管上的复合材料可以增加材料的光催化性能,已成为新的研究热点.本文采用低温液相法成功地合成了TiO2/CNTs复合材料,并用TEM、XRD和UV-vis对材料进行了表征,结果表明,TiO2很好地分散在CNTs上,具有显著的催化效果,有很好的应用前景.     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

广州市大气细粒子的化学组成与来源

对广州市四个不同功能区(石井、荔湾、天河和海珠)的夏季大气PM2.5进行了为期一个月的监测,并测试分析了其化学组成(有机碳/元素碳、水溶性离子和元素)。结果表明,广州市夏季PM2.5的平均浓度为97.54μg/m3,其化学组分有机物、SO42-和EC对PM2.5质量浓度贡献最大,分别占PM2.5质量浓度的42%~52%、25%~47%和10%~17%。化学质量平衡模型研究表明,机动车排放和煤燃烧是对广州市大气PM2.5影响最大的污染源,其贡献率分别为54%~75%和32%~52%。     

从银川市硫酸盐化速率五年来的变化趋势分析环境空气中二氧化硫的污染状况

硫酸盐化速率反映大气中二氧化硫及硫的化合物的污染状况,文章通过对银川市1999～2003年硫酸盐化速率的346个监测数据的统计分析,研究了煤烟型城市环境空气中二氧化硫的变化规律及污染状况。     

TSP-PM10-PM2.5-2型中流量大气颗粒物采集系统的开发和应用

自行开发并研制了TSP-PM10-PM2.5-2型中流量TSP、PM10、PM2.5大气颗粒物采集系统,是目前中国唯一可以采集TSP、PM10、PM2.5样品并提供足够的样品量进行大气颗粒物化学成分分析的中流量大气颗粒物采集器.该系统精心设计和加工的限流孔可以保持完全固定的流量,保证切割粒径的稳定,减小采样的误差并方便操作.该系统已经成功地应用于20多个城市和地区大气颗粒物的监测和研究中,为研究大气颗粒物的污染状况和来源提供了有效的技术手段和支持.     

环境监测业务管理系统的设计与开发

以郑州市环境监测中心站监测业务流程为例,从技术路线、系统结构设计、系统功能分析和技术实现等方面分析并介绍了环境监测业务管理系统的特点和开发时需解决的技术问题。探讨了建立基于B/S结构、J2EE技术架构、创新的组件装配方式、Oracle9i数据库、中间件和多层体系结构等多项先进技术进行系统实现的设计方案。     

差压式BOD5测定法的评价研究

对BOD5的测压法测定进行了评价,探讨了该法对接种量的特殊要求;比较了含毒物水样不同稀释比BOD5测定的区别,从而验证了该测定法可用以表征毒性物质对微生物活性的影响程度.通过模拟含毒印染废水活性污泥的处理,指出其不同稀释比BOD5值可作为该处理法的设计和运行管理的重要参数.