氧化还原介体厌氧催化酸性红B生物脱色研究

研究了筛选出的四种结构相似的醌类氧化还原介体对酸性红B厌氧脱色的促进作用,并以催化效果最佳的蒽醌-2-磺酸钠为醌介体模型,探讨了醌介体催化酸性红B厌氧生物降解路径。在35℃中温厌氧条件下,采用间歇批量实验法,测定不同体系中醌介体催化酸性红B脱色效果。结果表明:①在酸性红B浓度为150mg·L-1,醌介体浓度为0.16mmol/L,反应时间为4h时,结构相似的四种醌介体均可促进酸性红B脱色,反应效率提高了1.6².4倍,其大小顺序为AQS>2,7-AQDS>AQDS>α-AQS;②AQS在催化酸性红B降解过程中与传统厌氧微生物降解路径保持一致。     

还原水解——SBR法降解化工工业废水研究

本文用实验的方法研究了还原水解-SBR法降解化工工业废水的设计水解实验参数和运行参数,重点研究厌氧水解的限制因素,通过实验论证了本方法经济可行,处理效果较好。     

SNCR脱硝技术在循环流化床锅炉的应用

介绍了某电厂循环流化床锅炉SNCR(选择性非催化还原)脱硝系统的脱硝原理、基本构成及应用效果,测试结果表明,循环流化床锅炉选用SNCR脱硝技术可以达到新的火电厂污染物排放标准中的NOx排放要求。     

催化还原法净化处理氮氧化物的工程实例

针对不锈钢产品酸洗处理过程中产生的氮氧化物浓度高、对大气污染的影响大、且难于净化治理等特性,在上海某不锈钢项目中设计了一套酸雾净化系统。该设计解决了酸洗中产生的氮氧化物难以净化的问题,提升了氮氧化物处理技术,它将成为不锈钢酸洗行业中氮氧化物净化处理技术的发展方向。     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Fast increasing of surface ozone concentrations in Pearl River Delta characterized by a regional air quality monitoring network during 2006-2011

Based on the observation by a Regional Air Quality Monitoring Network including 16 monitoring stations, temporal and spatial variations of ozone(O3), NO2and total oxidant(Ox) were analyzed by both linear regression and cluster analysis. A fast increase of regional O3concentrations of 0.86 ppbV/yr was found for the annual averaged values from 2006 to 2011 in Guangdong, China. Such fast O3increase is accompanied by a correspondingly fast NOx reduction as indicated by a fast NO2 reduction rate of 0.61 ppbV/yr. Based on a cluster analysis, the monitoring stations were classified into two major categories – rural stations(non-urban) and suburban/urban stations. The O3concentrations at rural stations were relatively conserved while those at suburban/urban stations showed a fast increase rate of 2.0 ppbV/yr accompanied by a NO2 reduction rate of 1.2 ppbV/yr. Moreover, a rapid increase of the averaged O3 concentrations in springtime(13%/yr referred to 2006 level) was observed, which may result from the increase of solar duration, reduction of precipitation in Guangdong and transport from Eastern Central China. Application of smog production algorithm showed that the photochemical O3production is mainly volatile organic compounds(VOC)-controlled. However, the photochemical O3production is sensitive to both NOx and VOC for O3pollution episode. Accordingly, it is expected that a combined NOx and VOC reduction will be helpful for the reduction of the O3 pollution episodes in Pearl River Delta while stringent VOC emission control is in general required for the regional O3 pollution control.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Reaction mechanism and metal ion transformation in photocatalytic ozonation of phenol and oxalic acid with Ag+/TiO2

Photocatalytic ozonation of phenol and oxalic acid （OA） was conducted with a Ag^＋/TiO2 catalyst and different pathways were found for the degradation of different compounds. Ag^＋ greatly promoted the photocatalytic degradation of contaminants due to its role as an electron scavenger. It also accelerated the removal rate of OA in ozonation and the simultaneous process for its complex reaction with oxalate. Phenol could be degraded both in direct ozonation and photolysis, but the TOC removal rates were much higher in the simultaneous processes due to the oxidation of hydroxyl radicals resulting from synergetic effects. The sequence of photo-illumination and ozone exposure in the combined process showed quite different effects in phenol degradation and TOC removal. The synergetic effects in different combined processes were found to be highly related to the properties of the target pollutants. The color change of the solution and TEM result confirmed that Ag＋ was easily reduced and deposited on the surface of Tit2 under photo-illumination, and dissolved again into solution in the presence of ozone. This simple cycle of enrichment and distribution of Ag^＋ can greatly benefit the design of advanced oxidation processes, in which the sequences of ozone and photo-illumination can be varied according to the needs for catalyst recycling and the different properties of pollutants.     

FBC-DPF在柴油机颗粒物控制中的应用研究

目前针对加装FBC-DPF(燃油添加剂-柴油机颗粒捕集器)后的柴油机放特性研究较少,并且缺乏FBC-DPF对颗粒物中PAHs排放量的影响效果研究.为全面评估加装FBC-DPF后柴油机颗粒物排放特性和FBC-DPF对柴油机尾气中的颗粒物排放污染控制效果,在发动机台架上对装有FBC-DPF的重型柴油机进行了颗粒物排放特性试验.利用电子低压撞击仪(ELPI)测量加装FBC-DPF前、后柴油机颗粒物的数浓度与粒径分布,用玻璃纤维滤膜采集加装FBC-DPF前、后尾气中的固相PAHs,利用色谱质谱联用仪对加装FBC-DPF前、后尾气中的固相PAHs进行定量分析.结果表明:①加装FBC-DPF后柴油机排放的颗粒物数浓度大幅降低,FBC-DPF对尾气中颗粒物的捕集效率平均值在95%左右;②加装FBC-DPF后柴油机固相PAHs总比排放量有所降低,在大负荷区域降幅在25.0%～88.0%之间;③加装FBC-DPF前的颗粒物中位直径为30～89 nm,而加装FBC-DPF后的颗粒物中位直径为41～98 nm,平均增幅为38.2%.对于国Ⅳ及未来国Ⅴ柴油机排放法规,FBC-DPF是解决柴油机颗粒物排放的有效手段;此外,FBC-DPF可以大幅降低柴油机尾气中的有毒成分,并且能够适应高含硫量的燃油环境.